56 to go jobs found

GENERAL DESCRIPTION This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to F/A-18 A-G and F-35. Military aviation platform experience is a plus. This position will require a government issued clearance. DUTIES Perform a full range of aircraft sheet metal duties including, but not limited to, disassemble, modify, repair, and reassemble complex aircraft metal items and systems, e.g., bulkheads, airframes, spars, air scoops, wings, flaps, pylons, sponsons, fuselages, skins, ribs, gussets and fuel tanks. These items and systems have combined straight and curved edges and irregular curves and planes Analyze and evaluate structural damage to metal systems and items; develop patterns using a combination of parallel and radial line development; fabricate, install, and repair a variety of items and systems made from a wide variety of metals, e.g., stainless steel, copper sheet, magnesium, honeycomb,...

GENERAL DESCRIPTION Aerospace welders must perform welding operations on aircraft, aircraft components and aircraft engine parts DUTIES Perform fusion welding on aircraft and ground SE to a qualified Welding Procedure Specification (WPS) Perform structural fusion welding on aerospace parts and components per the requirements of specifications as prescribed by Engineering Drawings and Work Orders Fabricate manufacture-welded parts from engineering drawings without direct supervision Perform fusion welding and torch brazing for ground SE, ensuring the procedure is completed per the requirements of the national welding and brazing codes Weld a wide variety of material such as aluminum, magnesium, alloyed and low alloy steel, stainless steel and nickel alloy steels The candidate shall maintain welding certification/recertification as required and the skill and knowledge to perform one-time weld repairs which are not effected on a production...

GENERAL DESCRIPTION This is job is at a Depot Level repair facility. Military aviation platform experience in the F/A-18, P-8, F-5, T-6,T-44,H-60 is a plus. EA-6B and/or T-44 experience is a must. DUTIES Maintains repairs and modifies aircraft structures and structural components of moderate difficulty Maintains and repairs aircraft components including, but not limited to, flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components Applies technical knowledge of airframe and power plant systems in determining equipment malfunctions Applies required expertise in restoring equipment condition and or operation Applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as blueprints or manufactures' manuals Make necessary entries into aircraft logs and records Disassembly, repair and assembly of aircraft structural components, such as wings and...

GENERAL DESCRIPTION Work a full range of aircraft sheet metal duties including, but not limited to, disassemble, modify, repair and reassemble complex aircraft metal items & systems, including bulkheads, airframes, spars, air scoops, flaps, wings, pylons, sponsons, fuselages, skins, ribs, gussets and internal and external fuel tanks. DUTIES Candidate must be intimately familiar with all associate pneumatic and power riveting tools and sheet metal tools Analyze and evaluate structural damage to metal system and items Develop patterns using a combination of parallel and radial line development Fabricate, install, and repair a variety of items and systems made from a wide variety of metals, e.g., stainless steel, copper sheet, magnesium, honeycomb, alloys, aluminum etc. Replace sections and patch old systems Cut, bend, shape, and form metals for items that have numerous irregular angles, planes and curves with varying pitch and...

GENERAL DESCRIPTION: The Electronics Engineer Technician is responsible for the design, development and testing of electrical and electronic equipment, components, and systems. DUTIES: Must be a technical expert in Test Program Sets (TPS), built-in-test equipment (BIT/BITE) being able to perform analyses, development, evaluation, updates, prototyping, fielding, and specialized maintenance support in all phases of system life cycle. Must be able to work independently while providing remote and on-site troubleshooting and system repair highly technical and specialized maintenance on the Army's legacy Base Shop Test Facility and associated TPS, various Automated Test Equipment, Line Replaceable Units, and Shop Replaceable Units with limited supervision. Must be able to provide operator training for all customers on Army Automated Test Equipment and associated TPSs. Constructing components, subunits, or simple models per approved Government technical data...

GENERAL DESCRIPTION: The Electronics Engineer Technician is responsible for the design, development and testing of electrical and electronic equipment, components, and systems. DUTIES: Must be a technical expert in Test Program Sets (TPS), built-in-test equipment (BIT/BITE) being able to perform analyses, development, evaluation, updates, prototyping, fielding, and specialized maintenance support in all phases of system life cycle. Must be able to work independently while providing remote and on-site troubleshooting and system repair highly technical and specialized maintenance on the Army's legacy Base Shop Test Facility and associated TPS, various Automated Test Equipment, Line Replaceable Units, and Shop Replaceable Units with limited supervision. Must be able to provide operator training for all customers on Army Automated Test Equipment and associated TPSs. Constructing components, subunits, or simple models per approved Government technical data...

******************This position is contingent on contract award.****************** General Description Aircraft mechanical personnel support KC-135 aircraft maintenance operations. This position is based at Fairchild AFB, WA and requires CONUS/OCONUS travel to support maintenance operations throughout the United States and overseas. Ideal candidates are experienced KC-135 Crew Chiefs with a strong background in flight line maintenance, inspections, troubleshooting, and ensuring aircraft mission readiness. Duties Perform Organizational, Intermediate, and Depot-Level maintenance on KC-135 aircraft. Perform scheduled and unscheduled maintenance, inspections, servicing, and repairs. Troubleshoot aircraft systems and identify corrective actions. Remove, replace, repair, and modify aircraft components and assemblies. Read and interpret Technical Orders, engineering drawings, maintenance manuals, and technical documentation. Complete maintenance...

*************This position is contingent on contract award.************* General Description Hydraulics personnel support KC-135 aircraft maintenance operations. This position is based at Fairchild AFB, WA and requires CONUS/OCONUS travel to support maintenance operations throughout the United States and overseas. Ideal candidates specialize in aircraft hydraulic systems, with experience troubleshooting, repairing, servicing, and testing hydraulic components to maintain peak aircraft performance and mission readiness. Duties Perform scheduled and unscheduled maintenance on aircraft hydraulic systems. Troubleshoot, repair, service, and replace hydraulic components and assemblies. Perform operational checks, leak checks, and system testing. Read and interpret Technical Orders, hydraulic schematics, engineering drawings, and maintenance manuals. Remove and replace aircraft components as required. Complete maintenance documentation accurately and...

************************This position is contingent on contract award.************************ General Description Avionics personnel support KC-135 aircraft maintenance operations. This position is based at Fairchild AFB, WA and requires CONUS/OCONUS travel to support maintenance operations throughout the United States and overseas. Ideal candidates specialize in aircraft electrical and avionics systems, with experience troubleshooting, repairing, modifying, installing, and testing avionics equipment to ensure mission readiness. Duties Performs documentation of maintenance, modification, and repair activities. Perform and conduct routine inspections, special inspections, and troubleshooting; as well as inspect the same tasks of other technicians as required by regulations. Install aircraft avionic, electrical, or communication systems, sensors, and antennas. Comply with both host facility safety and quality regulations/requirements as well as all...

***********************This position is contingent on contract award.*********************** General Description The Site Lead is responsible for planning, directing, coordinating, and supervising all contract operations at Fairchild Air Force Base. This position provides leadership and serves as the primary on-site representative responsible for ensuring all work is performed safely, efficiently, and in accordance with contractual requirements, company policies, and Government regulations. The Site Supervisor fosters a culture of accountability, professionalism, quality, and continuous improvement while maintaining exceptional customer service throughout the life of the contract. Duties Supervise, mentor, and manage the daily activities, ensuring adequate staffing, productivity, and adherence to established schedules. Serve as the primary on-site point of contact with Government representatives, providing timely communication regarding contract performance,...

*****************************This position is contingent on contract award.***************************** General Description Sheet metal personnel support KC-135 aircraft maintenance operations. This position is based at Fairchild AFB, WA and requires CONUS/OCONUS travel to support maintenance operations throughout the United States and overseas. Ideal candidates have extensive experience performing aircraft structural repairs, modifications, fabrication, and corrosion repair while maintaining the highest standards of quality and safety. Duties Performs documentation of maintenance, modification, and repair activities. Perform and conduct routine inspections, special inspections, and troubleshooting; as well as inspect the same tasks of other technicians as required by regulations. Comply with both host facility safety and quality regulations/requirements as well as all applicable Tyonek quality and safety policies to ensure program success. Perform...

******************This job is contingent on contract award****************** General Description Sheet metal personnel support KC-135 aircraft modification operations. This position requires CONUS/OCONUS travel to support maintenance operations throughout the United States and overseas. Ideal candidates have extensive experience performing aircraft structural repairs, modifications, fabrication, and corrosion repair while maintaining the highest standards of quality and safety. Duties Performs documentation of maintenance, modification, and repair activities. Perform and conduct routine inspections, special inspections, and troubleshooting; as well as inspect the same tasks of other technicians as required by regulations. Comply with both host facility safety and quality regulations/requirements as well as all applicable Tyonek quality and safety policies to ensure program success. Perform aircraft structural repairs and modifications....

*************************This position is contingent on contract award.************************* General Description Will serve as Lead for a Contract Field Team comprised of 3-5 members working at various locations both CONUS and OCONUS. This team will complete installation of modification packages on KC-135 aircraft. Depending on individual core electrical and or avionics skills and experience, technicians will initially be utilized for on-aircraft avionics and electrical wire harness routing, installation, and clamping. The Team Lead is critical to the overall success of the effort. Duties Performs as a Contract Field Team (CFT) Lead Technician. Provides daily operational direction to the CFT team. Updates Project/Program Manager with daily progress reports. Provides clear and concise direction to team members as well as ensuring complete customer satisfaction. Performs and trains other technicians on advanced avionics maintenance,...

General Description Avionics personnel support KC-135 aircraft modification operations. This position requires CONUS/OCONUS travel to support maintenance operations throughout the United States and overseas. Ideal candidates specialize in aircraft electrical and avionics systems, with experience troubleshooting, repairing, modifying, installing, and testing avionics equipment to ensure mission readiness. Duties Performs documentation of maintenance, modification, and repair activities. Perform and conduct routine inspections, special inspections, and troubleshooting; as well as inspect the same tasks of other technicians as required by regulations. Install aircraft avionic, electrical, or communication systems, sensors, and antennas. Comply with both host facility safety and quality regulations/requirements as well as all applicable Tyonek quality and safety policies to ensure program success. Other duties as assigned Education/Experience...

************************************This job is contingent on contract award************************************************** General Description Electrician personnel support KC-135 aircraft modification operations. This position requires CONUS/OCONUS travel to support maintenance operations throughout the United States and overseas. Ideal candidates specialize in aircraft electrical and avionics systems, with experience troubleshooting, repairing, modifying, installing, and testing avionics equipment to ensure mission readiness. Duties Performs documentation of maintenance, modification, and repair activities. Perform and conduct routine inspections, special inspections, and troubleshooting; as well as inspect the same tasks of other technicians as required by regulations. Install aircraft avionic, electrical, or communication systems, sensors, and antennas. Comply with both host facility safety and quality regulations/requirements as well as all...

***************************************This job is contingent on contract award*************************************** General Description Aircraft mechanical personnel support KC-135 aircraft modification operations. This position requires CONUS/OCONUS travel to support maintenance operations throughout the United States and overseas. Ideal candidates are experienced KC-135 Crew Chiefs with a strong background in flight line maintenance, inspections, troubleshooting, and ensuring aircraft mission readiness. Duties Perform Organizational, Intermediate, and Depot-Level maintenance on KC-135 aircraft. Perform scheduled and unscheduled maintenance, inspections, servicing, and repairs. Troubleshoot aircraft systems and identify corrective actions. Remove, replace, repair, and modify aircraft components and assemblies. Read and interpret Technical Orders, engineering drawings, maintenance manuals, and technical documentation. Complete maintenance...

GENERAL DESCRIPTION Must be able to remove, repair, modify, test, troubleshoot, calibrate, and install electrical systems, equipment, and accessories used in aircraft. DUTIES Make functional checks on electrical systems to ensure performance and reliability and correct malfunctions disclosed by static, ground, and flight tests Replace defective wiring and install new wiring for aircraft changes, modifications and repairs Perform work using overhaul and maintenance manuals, aircraft changes, bulletins, local directives, blueprints, and wiring and/or schematic diagrams Must be able to overhaul, repair, modify and test aircraft electrical system accessories such as motors, dynamotors, /inverters, voltage regulators, relays, cutouts, engine synchronizers, electric motor driven air compressors and activators, DC generators, AC alternators, and DC/AC electrical controls, cockpit air conditioning controls, engine temperature controls, and...

General Description This position supports the Government Property Management System by ensuring compliance with Federal Acquisition Regulation (FAR) Part 45, DFARS 252, DCMA guidance, and contractual requirements throughout the property lifecycle. Working closely with Contracts, Program Management, Procurement, Logistics, and government customers, the Government Property Administrator maintains accurate property records, supports audits and inventories, coordinates property transactions, and assists with contract closeout activities. This role serves as a key resource for government property matters while supporting the company's commitment to protecting government and company assets. Duties Administer government-furnished property (GFP) and contractor-acquired property (CAP) throughout the property lifecycle, including acquisition, receipt, identification, utilization, maintenance, inventory, transfer, and disposition. Track the movement of property by...

GENERAL DESCRIPTION This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8, T-34, F-35 and V-22. Military Intermediate level experience is a plus DUTIES Reviews blueprints, schematics, and safety procedures while complying with engineering specifications and maintenance instructions utilizing NDMS CONOPS systems. Disassemble, repair, rework and complete overhaul of various components such as Tire/Wheel assemblies, Brake systems, landing gear, shock absorbers, arresting gear to include tail hooks and launch bars. Repair engine mounts, wing support structures and various aircraft mechanisms. Rig, adjust, and calibrate aircraft slings and other support equipment for all aircraft platforms. Assist Engineers with component discrepancies and investigations. Performs final testing and certification of assemblies using...

GENERAL DESCRIPTION Supervise and coordinate the activities of Quality Assurance and Maintenance Department Safety. Directly supervise Quality Inspectors and Supply Technicians-IMRL. Supervise and perform I-level quality assurance inspections on assigned aircraft/aeronautical equipment/SE. Inspect, test, sort, sample, or weigh nonagricultural raw materials or processed, machined, fabricated, or assembled parts or products for defects, wear, and deviations from specifications. May use precision measuring instruments and complex test equipment. DUTIES Works from blue-prints, maintenance manuals, quality control procedures, quality instructions, Contractor standard specifications, naval inspection manual/cards and military technical directives. Inspects mechanical, electrical and electronic systems assemblies and engines using general and special test equipment. Monitors all required inspections of maintenance procedures and system checkouts....