29 electrician jobs found

************************************This job is contingent on contract award************************************************** General Description Electrician personnel support KC-135 aircraft modification operations. This position requires CONUS/OCONUS travel to support maintenance operations throughout the United States and overseas. Ideal candidates specialize in aircraft electrical and avionics systems, with experience troubleshooting, repairing, modifying, installing, and testing avionics equipment to ensure mission readiness. Duties Performs documentation of maintenance, modification, and repair activities. Perform and conduct routine inspections, special inspections, and troubleshooting; as well as inspect the same tasks of other technicians as required by regulations. Install aircraft avionic, electrical, or communication systems, sensors, and antennas. Comply with both host facility safety and quality regulations/requirements as well as all...

GENERAL DESCRIPTION Must be able to remove, repair, modify, test, troubleshoot, calibrate, and install electrical systems, equipment, and accessories used in aircraft. DUTIES Make functional checks on electrical systems to ensure performance and reliability and correct malfunctions disclosed by static, ground, and flight tests Replace defective wiring and install new wiring for aircraft changes, modifications and repairs Perform work using overhaul and maintenance manuals, aircraft changes, bulletins, local directives, blueprints, and wiring and/or schematic diagrams Must be able to overhaul, repair, modify and test aircraft electrical system accessories such as motors, dynamotors, /inverters, voltage regulators, relays, cutouts, engine synchronizers, electric motor driven air compressors and activators, DC generators, AC alternators, and DC/AC electrical controls, cockpit air conditioning controls, engine temperature controls, and...

GENERAL DESCRIPTION Must be able to remove, repair, modify, test, troubleshoot, calibrate, and install electrical systems, equipment, and accessories used in aircraft. DUTIES Make functional checks on electrical systems to ensure performance and reliability and correct malfunctions disclosed by static, ground, and flight tests Replace defective wiring and install new wiring for aircraft changes, modifications and repairs Perform work using overhaul and maintenance manuals, aircraft changes, bulletins, local directives, blueprints, and wiring and/or schematic diagrams Must be able to overhaul, repair, modify and test aircraft electrical system accessories such as motors, dynamotors, /inverters, voltage regulators, relays, cutouts, engine synchronizers, electric motor driven air compressors and activators, DC generators, AC alternators, and DC/AC electrical controls, cockpit air conditioning controls, engine temperature controls, and transistorized...

G ENERAL DESCRIPTION Responsible for leading 50+ employees in the production and testing of a variety of complex cable assemblies. The production of what may seem like an unimportant cannon plug connector is the link between aircraft or ground vehicle systems that propels us forward to bigger and better accomplishments. As a production supervisor, you will be leading the electrical manufacturing efforts working with talented and dedicated individuals tasked with promoting positivity and making a difference each day. Must be ready to play an active role on the floor working with the assemblers, technicians, floor leads, and engineering while supporting manufacturing schedules, quality expectations, and budget. DUTIES Provide effective leadership and direction to all assigned employees. Manage employee performance, discipline, development, and recourse planning. Understand each employee's knowledge, skills and abilities in order to leverage...

GENERAL DESCRIPTION Manufactures electronic assemblies by performing various operations to include but not limited to SMT soldering and repairs, through-hole soldering and repairs, wire termination, cable harness assembly and cable harness installation and box integration. DUTIES Assembles electrical and electronic components, wiring harnesses, and other electrical assemblies and subassemblies. Manufactures electronic/electrical circuitry, electronic components (CCA's), and wiring harnesses according to Manufacturing Orders (M.O.), Drawings, Engineering Changes, Customer Specifications, and Process of Instructions (P.I.). Must be familiar with and understand IPC/J-STD, AS and MIL specifications as they relate to Defense/Aerospace requirements. Maintains clean and safe working environment in line with company policies. Other Duties as Assigned EDUCATION/EXPERIENCE REQUIREMENTS High school diploma or equivalent 10+ years of...

GENERAL DESCRIPTION Assemble, test, and rework cables, harnesses, mechanical and electromechanical products. DUTIES Assemble products according to routers, drawings, and all other applicable documentation Operate automatic stripping, crimping, wire cutting, and basic test equipment Maintain a clean and safe working environment Work together cohesively with co-workers to ensure a constructive teaming environment Maintain acceptable test pass rates and quality acceptance rates. Use manual hand tools for assembly and repetitive operation Checks stock bins for adequate supplies of subassemblies, parts, and fasteners for the particular run. Checks for designated carton pack. Contacts material handler if shortages exists or incorrect parts are in bin. From experience, resolves assembly and packing problems. Reports other problems to the Production Manager for assistance. Involved with productivity and quality improvement efforts...

GENERAL DESCRIPTION Performs electronic assembly operations such as SMT soldering and repairs, through hole soldering and repairs, wire termination, cable harness assembly and cable harness installation into chassis and modules. DUTIES Assembles electrical and electronic components, wiring harnesses, and other electrical assemblies and subassemblies. Manufactures electronic/electrical circuitry, electronic components (CCA's), and wiring harnesses according to Manufacturing Orders (M.O.), Drawings, Engineering Changes, Customer Specifications, and Process Instructions (P.I.). Cable harness build experience both crimp and solder Knowledge of lean manufacturing, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. Must be familiar with and understand IPC/J-STD, AS and MIL specifications as they relate to Defense/Aerospace requirements in CCA's and Harness build. Ability to develop...

GENERAL DESCRIPTION Manufactures electronic assemblies by performing various operations to include but not limited to SMT soldering and repairs, through-hole soldering and repairs, wire termination, cable harness assembly and cable harness installation and box integration. DUTIES Assembles electrical and electronic components, wiring harnesses, and other electrical assemblies and subassemblies. Manufactures electronic/electrical circuitry, electronic components (CCA's), and wiring harnesses according to Manufacturing Orders (M.O.), Drawings, Engineering Changes, Customer Specifications, and Process of Instructions (P.I.). Must be familiar with and understand IPC/J-STD, AS and MIL specifications as they relate to Defense/Aerospace requirements. Maintains clean and safe working environment in line with company policies. Other Duties as Assigned EDUCATION/EXPERIENCE REQUIREMENTS High school diploma or equivalent 10+ years of...

General Description Leads production efforts in the manufacturing of electro-mechanical assemblies as an individual contributor. These assemblies involve various electronic assembly operations to include but not limited to SMT soldering and repairs, through-hole soldering and repairs, optical fiber, fiber cables, hybrid wiring harness assemblies, wire termination, cable harness assembly, cable harness integration into chassis and modules. This an advanced position. Duties Assembles electrical and electronic components, wiring harnesses, and other electrical assemblies and subassemblies. Manufactures electronic/electrical circuitry, electronic components (CCA's), and wiring harnesses according to Manufacturing Orders (M.O.), Drawings, Engineering Changes, Customer Specifications, and Process of Instructions (P.I.). Understand and interpret IPC/J-ST, AS, and MIL specifications as they relate to Defense/Aerospace. Procure the necessary tools, parts, and...

GENERAL DESCRIPTION Supervise and coordinate the activities of Quality Assurance and Maintenance Department Safety. Directly supervise Quality Inspectors and Supply Technicians-IMRL. Supervise and perform I-level quality assurance inspections on assigned aircraft/aeronautical equipment/SE. Inspect, test, sort, sample, or weigh nonagricultural raw materials or processed, machined, fabricated, or assembled parts or products for defects, wear, and deviations from specifications. May use precision measuring instruments and complex test equipment. DUTIES Works from blue-prints, maintenance manuals, quality control procedures, quality instructions, Contractor standard specifications, naval inspection manual/cards and military technical directives. Inspects mechanical, electrical and electronic systems assemblies and engines using general and special test equipment. Monitors all required inspections of maintenance procedures and system checkouts....

GENERAL DESCRIPTION  Will augment Prime Contractor as an aircraft maintenance resource at US Army sites to ensure aircraft maintenance tasks are performed as required for the LUH-72 aircraft. This position is critical to the operational readiness of the aircraft and is vital to ensure aircraft are available for daily missions. Must demonstrate comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair, and the ability to determine functionality of non-complex electrical systems. DUTIES Maintains, repairs and modifies aircraft structures, structural components, and engines of complex to extreme difficulty. Maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components. Use technical knowledge of airframe and power plant...

GENERAL DESCRIPTION This is job is at a Depot Level repair facility maintenance on H-60 aircraft. Military aviation platform experience is a plus. This position will require a government issued clearance. DUTIES Perform a full range of aircraft sheet metal duties including, but not limited to, disassemble, modify, repair, and reassemble complex aircraft metal items and systems, e.g., bulkheads, airframes, spars, air scoops, wings, flaps, pylons, sponsons, fuselages, skins, ribs, gussets and fuel tanks. These items and systems have combined straight and curved edges and irregular curves and planes Analyze and evaluate structural damage to metal systems and items; develop patterns using a combination of parallel and radial line development; fabricate, install, and repair a variety of items and systems made from a wide variety of metals, e.g., stainless steel, copper sheet, magnesium, honeycomb, alloys, aluminum; replace sections and patch old systems; cut,...

GENERAL DESCRIPTION This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to F/A-18 A-G and F-35. Military aviation platform experience is a plus. This position will require a government issued clearance. DUTIES Perform a full range of aircraft sheet metal duties including, but not limited to, disassemble, modify, repair, and reassemble complex aircraft metal items and systems, e.g., bulkheads, airframes, spars, air scoops, wings, flaps, pylons, sponsons, fuselages, skins, ribs, gussets and fuel tanks. These items and systems have combined straight and curved edges and irregular curves and planes Analyze and evaluate structural damage to metal systems and items; develop patterns using a combination of parallel and radial line development; fabricate, install, and repair a variety of items and systems made from a wide variety of metals, e.g., stainless steel, copper sheet, magnesium, honeycomb,...

GENERAL DESCRIPTION: The Electronics Engineer Technician is responsible for the design, development and testing of electrical and electronic equipment, components, and systems. DUTIES: Must be a technical expert in Test Program Sets (TPS), built-in-test equipment (BIT/BITE) being able to perform analyses, development, evaluation, updates, prototyping, fielding, and specialized maintenance support in all phases of system life cycle. Must be able to work independently while providing remote and on-site troubleshooting and system repair highly technical and specialized maintenance on the Army's legacy Base Shop Test Facility and associated TPS, various Automated Test Equipment, Line Replaceable Units, and Shop Replaceable Units with limited supervision. Must be able to provide operator training for all customers on Army Automated Test Equipment and associated TPSs. Constructing components, subunits, or simple models per approved Government technical data...

GENERAL DESCRIPTION: The Electronics Engineer Technician is responsible for the design, development and testing of electrical and electronic equipment, components, and systems. DUTIES: Must be a technical expert in Test Program Sets (TPS), built-in-test equipment (BIT/BITE) being able to perform analyses, development, evaluation, updates, prototyping, fielding, and specialized maintenance support in all phases of system life cycle. Must be able to work independently while providing remote and on-site troubleshooting and system repair highly technical and specialized maintenance on the Army's legacy Base Shop Test Facility and associated TPS, various Automated Test Equipment, Line Replaceable Units, and Shop Replaceable Units with limited supervision. Must be able to provide operator training for all customers on Army Automated Test Equipment and associated TPSs. Constructing components, subunits, or simple models per approved Government technical data...

************************This position is contingent on contract award.************************ General Description Avionics personnel support KC-135 aircraft maintenance operations. This position is based at Fairchild AFB, WA and requires CONUS/OCONUS travel to support maintenance operations throughout the United States and overseas. Ideal candidates specialize in aircraft electrical and avionics systems, with experience troubleshooting, repairing, modifying, installing, and testing avionics equipment to ensure mission readiness. Duties Performs documentation of maintenance, modification, and repair activities. Perform and conduct routine inspections, special inspections, and troubleshooting; as well as inspect the same tasks of other technicians as required by regulations. Install aircraft avionic, electrical, or communication systems, sensors, and antennas. Comply with both host facility safety and quality regulations/requirements as well as all...

***********************This position is contingent on contract award.*********************** General Description The Site Lead is responsible for planning, directing, coordinating, and supervising all contract operations at Fairchild Air Force Base. This position provides leadership and serves as the primary on-site representative responsible for ensuring all work is performed safely, efficiently, and in accordance with contractual requirements, company policies, and Government regulations. The Site Supervisor fosters a culture of accountability, professionalism, quality, and continuous improvement while maintaining exceptional customer service throughout the life of the contract. Duties Supervise, mentor, and manage the daily activities, ensuring adequate staffing, productivity, and adherence to established schedules. Serve as the primary on-site point of contact with Government representatives, providing timely communication regarding contract performance,...

*************************This position is contingent on contract award.************************* General Description Will serve as Lead for a Contract Field Team comprised of 3-5 members working at various locations both CONUS and OCONUS. This team will complete installation of modification packages on KC-135 aircraft. Depending on individual core electrical and or avionics skills and experience, technicians will initially be utilized for on-aircraft avionics and electrical wire harness routing, installation, and clamping. The Team Lead is critical to the overall success of the effort. Duties Performs as a Contract Field Team (CFT) Lead Technician. Provides daily operational direction to the CFT team. Updates Project/Program Manager with daily progress reports. Provides clear and concise direction to team members as well as ensuring complete customer satisfaction. Performs and trains other technicians on advanced avionics maintenance,...

General Description Avionics personnel support KC-135 aircraft modification operations. This position requires CONUS/OCONUS travel to support maintenance operations throughout the United States and overseas. Ideal candidates specialize in aircraft electrical and avionics systems, with experience troubleshooting, repairing, modifying, installing, and testing avionics equipment to ensure mission readiness. Duties Performs documentation of maintenance, modification, and repair activities. Perform and conduct routine inspections, special inspections, and troubleshooting; as well as inspect the same tasks of other technicians as required by regulations. Install aircraft avionic, electrical, or communication systems, sensors, and antennas. Comply with both host facility safety and quality regulations/requirements as well as all applicable Tyonek quality and safety policies to ensure program success. Other duties as assigned Education/Experience...

GENERAL DESCRIPTION This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8, T-34, F-35 and V-22. Military Intermediate level experience is a plus DUTIES Reviews blueprints, schematics, and safety procedures while complying with engineering specifications and maintenance instructions utilizing NDMS CONOPS systems. Disassemble, repair, rework and complete overhaul of various components such as Tire/Wheel assemblies, Brake systems, landing gear, shock absorbers, arresting gear to include tail hooks and launch bars. Repair engine mounts, wing support structures and various aircraft mechanisms. Rig, adjust, and calibrate aircraft slings and other support equipment for all aircraft platforms. Assist Engineers with component discrepancies and investigations. Performs final testing and certification of assemblies using...