13 access service representative jobs found

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Provide support for performing aircraft/engine/special asset reseals as required IAW T.O. 1-1-686 and Sealing Diagrams for all assigned aircraft to be prepared for storage. Preserve aircraft, aircraft engines, and associated equipment, perform special reseals after parts removal from aircraft and for Process-In/Re-preservation by applying preservative sealant using specialized equipment. All work shall be accomplished IAW technical data/manuals, production work orders, and approved process orders. Other duties as assigned EDUCATION/EXPERIENCE REQUIREMENTS: Must have a high school diploma or equivalent Must have at least 3-5 years of applicable experience...

GENERAL DESCRIPTION This is job is at a Depot Level repair facility. Military aviation platform experience in the F/A-18, P-8, F-5, T-6,T-44,H-60 is a plus. EA-6B and/or T-44 experience is a must. DUTIES Maintains repairs and modifies aircraft structures and structural components of moderate difficulty Maintains and repairs aircraft components including, but not limited to, flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components Applies technical knowledge of airframe and power plant systems in determining equipment malfunctions Applies required expertise in restoring equipment condition and or operation Applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as blueprints or manufactures' manuals Make necessary entries into aircraft logs and records Disassembly, repair and assembly of aircraft structural components, such as wings and fuselage, and...

** THIS POSITION IS CONTINGENT UPON AWARD**   GENERAL DESCRIPTION: Tyonek Services Group (Tyonek) is an 8(a) Native American Corporation formed under the Alaska Native Claims Settlement Act of 1971 (ANCSA). We are seeking a Program Manager (PgM) who will serve as the primary interface between the company and government program authorities. This position requires extensive knowledge and experience with Depot Level Modification line, and O-Level, and I-Level maintenance support on H-1 Helicopters. This position is responsible for ensuring the required deliverables are met within the specified constraints of time and cost and to achieve the potential benefits defined in the Statement of Work. The PgM is the Tyonek representative to the US Government customer. The PgM will have the overall responsibility to ensure we provide the support the contract requires to satisfy customer requirements. This includes management of issues, risks, and change requests to ensure...

GENERAL DESCRIPTION The Procurement Manager is responsible for leading and managing the organization's procurement function to ensure the timely, compliant, and cost-effective acquisition of materials, equipment, services, and indirect purchases in support of company operations and customer requirements. This position oversees procurement personnel, supplier relationships, sourcing strategies, purchasing processes, and compliance with company policies and applicable government regulations. The Procurement Manager serves as a strategic business partner to Operations, Programs, Engineering, Finance, and Quality to drive supplier performance, improve procurement cycle times, reduce costs, mitigate supply chain risks, and support organizational growth. The position focuses on execution, compliance, cost control, and schedule adherence, directly supporting program performance and EBITDA objectives. DUTIES Procurement Leadership Lead, develop, and manage...

General Description Work independently and with a team to design/develop interface test adapters, cabling, automated software test programs and associated documentation for sub-assemblies and systems. Duties Integrate test hardware and software for Units Under Test (UUTs) Develop and integrate automated tests (Test Program Sets) for digital and mixed signal Electronic Circuit Assemblies. Interpret Test Requirements Specification for RF, Analog, Digital cards, and Power Supplies. Use design software to develop Printed Circuit Boards. Apply principles and techniques of electrical engineering to accomplish goals. Works under general supervision; reports to a supervisor or manager. Must be able to work creatively and independently problem solve. Other Duties as Assigned Education/Experience Requirements Bachelor's degree in engineering (Electrical, Computer, or Software) with 2-3 years experience. Experience may be substituted...

General Description  The Computer Engineer will develop advanced FPGA solutions that power both current and next‑generation defense systems. This role involves full‑lifecycle FPGA development, from requirements and architecture through design, verification, and implementation. The engineer will collaborate closely with software, hardware, and systems engineering teams to deliver optimized, reliable, and mission‑critical FPGA architectures tailored for performance, device utilization, power efficiency, and thermal requirements. U.S. citizenship is required. This position is located at a facility requiring special access, and the selected candidate must be able to obtain and maintain a Secret clearance. Duties Develop complex FPGA designs, including specification, architecture, implementation, and verification. Work with high‑speed I/O designs and communication protocols (PCIe, I2C, SPI, etc.). Manage and coordinate engineering efforts across multiple...

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Provide direct labor support for aircraft egress systems and possess an advanced level of knowledge, skill and ability in the field. Meet the egress requirements outlined in AFI 21-102, chapter 12 and AFMCI21-100, chapter 12. Receive specialty egress training and certification for at least one of the following aircraft prior to performing on this Task Order: A-10 and F-16. May be required to receive just-in- time (JIT) training from the Government for other aircraft MDS egress system removal and installation as required. Accomplish the following functions on A-10 and F- 16, and other aircraft as required: remove/install canopy, remove/install seat/seat support...

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Service engines, fuel systems, and airframe components. Make repairs required to keep aircraft in safe operating condition; adjust, repair, or replace aircraft components; perform pre-flight, through-flight, and post-flight maintenance inspections; perform miscellaneous duties to service aircraft, clean screens and filters, grease moving parts, and check brakes. Perform aircraft jacking and towing, troubleshoot malfunctions in aircraft structures, fuel systems, landing gear, flight surfaces and controls, anti-icing, pneudraulics, engines, auxiliary power unit, and ventilation and heating systems. Perform progressive isochronal, phase, periodic, and other hourly or...

General Description The Government Property Administrator is responsible for the strategic oversight, accountability, and compliant management of government-furnished and contractor-acquired property across all Tyonek sites. This role ensures full adherence to FAR Part 45, DFARS 252, DCMA guidelines, and applicable contract requirements, while serving as the primary liaison between Tyonek and government customers on all property-related matters. The position plays a critical role in protecting company and government assets and supporting contract performance through rigorous recordkeeping, auditing, and training. Duties Track movement of property by coordinating and documenting applicable forms to accomplish changes in ownership, accountability, or location in accordance with government regulations, customer contracts, and corporate policy. Review contracts to identify and implement property requirements. Develop and implement processes and procedures...

**THIS POSITION IS CONTINGENT UPON CONTRACT AWARD** GENERAL DESCRIPTION: Tyonek Services Group will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Interpret written instructions, technical data, engineering drawings, and specifications to plan and lay out machining operations required for the fabrication, restoration, and modification of landing-gear components. Use Machinist hand tools, precision measuring instruments, and standard machine tools, including lathes, mills, grinders, Computer Numerical Control (CNC), and related equipment-to produce metal parts to the close tolerances required for aircraft landing-gear systems. Perform machining computations involving dimensions, tolerances, feeds, speeds, and tooling requirements; apply...

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Plan, construct and repair specialized containers and material handling items using wood, wood substitute materials or materials required by technical data. Perform standard and specialized preservation and/or packing using various techniques to ensure safe and damage free movement of various aircraft components. Aircraft components include large and unbalanced equipment, sensitive electronics, delicate instruments, industrial components, radar antennas, turbines engines and hazardous materials. Prepare, and process required documentation, special handing labels, shipping codes, and required safety data. Plan, construct and repair containers using Special...

** THIS POSITION IS CONTINGENT UPON AWARD**   GENERAL DESCRIPTION: Tyonek Services Group (Tyonek) is an 8(a) Native American Corporation formed under the Alaska Native Claims Settlement Act of 1971 (ANCSA). We are seeking a Program Manager (PgM) who will serve as the primary interface between the company and government program authorities. You will oversee the execution of contract requirements of the Marine Corps Prepositioning Programs and have significant responsibility for managing program resources. This position requires extensive knowledge and experience with Marine Corps logistical functions, equipment maintenance, supply chain, and Marine Corps Maritime Prepositions Force Operations. This position is responsible for ensuring the required deliverables are met within the specified constraints of time and cost and to achieve the potential benefits defined in the Statement of Work. The PgM is the Tyonek representative to the US Government customer. The PgM...

GENERAL DESCRIPTION: Will perform Field and Sustainment Level maintenance support/augmentation to include: Production control, Quality Control, Supply Management, maintenance, and repair of aircraft, as well as launch and recovery of aircraft prior to and after the conduct of flight activities. Shall work in specialized shops associated with fixed base operations Field Level maintenance as well as perform troubleshooting and maintenance repairs on the flight line in Hopkins, SC. DUTIES: Implements quality control and ground safety programs to ensure compliance with contract specifications. Inspects and verifies proper completion of documentation of Safety of Flight discrepancies. Briefs and debriefs pilots and crew members assigned to perform functional check flights. Performs audits and inspections of work center and maintenance actions, procedures, equipment, and facilities. Examines parts and components for conformance to design...