18 engineer lead jobs found

GENERAL DESCRIPTION Aerospace welders must perform welding operations on aircraft, aircraft components and aircraft engine parts DUTIES Perform fusion welding on aircraft and ground SE to a qualified Welding Procedure Specification (WPS) Perform structural fusion welding on aerospace parts and components per the requirements of specifications as prescribed by Engineering Drawings and Work Orders Fabricate manufacture-welded parts from engineering drawings without direct supervision Perform fusion welding and torch brazing for ground SE, ensuring the procedure is completed per the requirements of the national welding and brazing codes Weld a wide variety of material such as aluminum, magnesium, alloyed and low alloy steel, stainless steel and nickel alloy steels The candidate shall maintain welding certification/recertification as required and the skill and knowledge to perform one-time weld repairs which are not effected on a production...

GENERAL DESCRIPTION This is job is at a Depot Level repair facility. Military aviation platform experience in the F/A-18, P-8, F-5, T-6,T-44,H-60 is a plus. EA-6B and/or T-44 experience is a must. DUTIES Maintains repairs and modifies aircraft structures and structural components of moderate difficulty Maintains and repairs aircraft components including, but not limited to, flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components Applies technical knowledge of airframe and power plant systems in determining equipment malfunctions Applies required expertise in restoring equipment condition and or operation Applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as blueprints or manufactures' manuals Make necessary entries into aircraft logs and records Disassembly, repair and assembly of aircraft structural components, such as wings and...

GENERAL DESCRIPTION: The Electronics Engineer Technician is responsible for the design, development and testing of electrical and electronic equipment, components, and systems. DUTIES: Must be a technical expert in Test Program Sets (TPS), built-in-test equipment (BIT/BITE) being able to perform analyses, development, evaluation, updates, prototyping, fielding, and specialized maintenance support in all phases of system life cycle. Must be able to work independently while providing remote and on-site troubleshooting and system repair highly technical and specialized maintenance on the Army's legacy Base Shop Test Facility and associated TPS, various Automated Test Equipment, Line Replaceable Units, and Shop Replaceable Units with limited supervision. Must be able to provide operator training for all customers on Army Automated Test Equipment and associated TPSs. Constructing components, subunits, or simple models per approved Government technical data...

GENERAL DESCRIPTION: The Electronics Engineer Technician is responsible for the design, development and testing of electrical and electronic equipment, components, and systems. DUTIES: Must be a technical expert in Test Program Sets (TPS), built-in-test equipment (BIT/BITE) being able to perform analyses, development, evaluation, updates, prototyping, fielding, and specialized maintenance support in all phases of system life cycle. Must be able to work independently while providing remote and on-site troubleshooting and system repair highly technical and specialized maintenance on the Army's legacy Base Shop Test Facility and associated TPS, various Automated Test Equipment, Line Replaceable Units, and Shop Replaceable Units with limited supervision. Must be able to provide operator training for all customers on Army Automated Test Equipment and associated TPSs. Constructing components, subunits, or simple models per approved Government technical data...

GENERAL DESCRIPTION Must be able to remove, repair, modify, test, troubleshoot, calibrate, and install electrical systems, equipment, and accessories used in aircraft. DUTIES Make functional checks on electrical systems to ensure performance and reliability and correct malfunctions disclosed by static, ground, and flight tests Replace defective wiring and install new wiring for aircraft changes, modifications and repairs Perform work using overhaul and maintenance manuals, aircraft changes, bulletins, local directives, blueprints, and wiring and/or schematic diagrams Must be able to overhaul, repair, modify and test aircraft electrical system accessories such as motors, dynamotors, /inverters, voltage regulators, relays, cutouts, engine synchronizers, electric motor driven air compressors and activators, DC generators, AC alternators, and DC/AC electrical controls, cockpit air conditioning controls, engine temperature controls, and...

GENERAL DESCRIPTION This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8, T-34, F-35 and V-22. Military Intermediate level experience is a plus DUTIES Reviews blueprints, schematics, and safety procedures while complying with engineering specifications and maintenance instructions utilizing NDMS CONOPS systems. Disassemble, repair, rework and complete overhaul of various components such as Tire/Wheel assemblies, Brake systems, landing gear, shock absorbers, arresting gear to include tail hooks and launch bars. Repair engine mounts, wing support structures and various aircraft mechanisms. Rig, adjust, and calibrate aircraft slings and other support equipment for all aircraft platforms. Assist Engineers with component discrepancies and investigations. Performs final testing and certification of assemblies using...

GENERAL DESCRIPTION Supervise and coordinate the activities of Quality Assurance and Maintenance Department Safety. Directly supervise Quality Inspectors and Supply Technicians-IMRL. Supervise and perform I-level quality assurance inspections on assigned aircraft/aeronautical equipment/SE. Inspect, test, sort, sample, or weigh nonagricultural raw materials or processed, machined, fabricated, or assembled parts or products for defects, wear, and deviations from specifications. May use precision measuring instruments and complex test equipment. DUTIES Works from blue-prints, maintenance manuals, quality control procedures, quality instructions, Contractor standard specifications, naval inspection manual/cards and military technical directives. Inspects mechanical, electrical and electronic systems assemblies and engines using general and special test equipment. Monitors all required inspections of maintenance procedures and system checkouts....

GENERAL DESCRIPTION This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8, T-34, F-35 and V-22. Military Intermediate level experience is a plus DUTIES Reviews blueprints, schematics, and safety procedures while complying with engineering specifications and maintenance instructions utilizing NDMS CONOPS systems. Disassemble, repair, rework and complete overhaul of various components such as Tire/Wheel assemblies, Brake systems, landing gear, shock absorbers, arresting gear to include tail hooks and launch bars. Repair engine mounts, wing support structures and various aircraft mechanisms. Rig, adjust, and calibrate aircraft slings and other support equipment for all aircraft platforms. Assist Engineers with component discrepancies and investigations. Performs final testing and certification of assemblies using...

GENERAL DESCRIPTION This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8, T-34, F-35 and V-22. Military Intermediate level experience is a plus DUTIES Reviews blueprints, schematics, and safety procedures while complying with engineering specifications and maintenance instructions utilizing NDMS CONOPS systems. Disassemble, repair, rework and complete overhaul of various components such as Tire/Wheel assemblies, Brake systems, landing gear, shock absorbers, arresting gear to include tail hooks and launch bars. Repair engine mounts, wing support structures and various aircraft mechanisms. Rig, adjust, and calibrate aircraft slings and other support equipment for all aircraft platforms. Assist Engineers with component discrepancies and investigations. Performs final testing and certification of assemblies using...

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Provide support for performing aircraft/engine/special asset reseals as required IAW T.O. 1-1-686 and Sealing Diagrams for all assigned aircraft to be prepared for storage. Preserve aircraft, aircraft engines, and associated equipment, perform special reseals after parts removal from aircraft and for Process-In/Re-preservation by applying preservative sealant using specialized equipment. All work shall be accomplished IAW technical data/manuals, production work orders, and approved process orders. Other duties as assigned EDUCATION/EXPERIENCE REQUIREMENTS: Must have a high school diploma or equivalent Must have at least 3-5 years of applicable experience...

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Provide direct labor support for aircraft egress systems and possess an advanced level of knowledge, skill and ability in the field. Meet the egress requirements outlined in AFI 21-102, chapter 12 and AFMCI21-100, chapter 12. Receive specialty egress training and certification for at least one of the following aircraft prior to performing on this Task Order: A-10 and F-16. May be required to receive just-in- time (JIT) training from the Government for other aircraft MDS egress system removal and installation as required. Accomplish the following functions on A-10 and F- 16, and other aircraft as required: remove/install canopy, remove/install seat/seat support...

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Service engines, fuel systems, and airframe components. Make repairs required to keep aircraft in safe operating condition; adjust, repair, or replace aircraft components; perform pre-flight, through-flight, and post-flight maintenance inspections; perform miscellaneous duties to service aircraft, clean screens and filters, grease moving parts, and check brakes. Perform aircraft jacking and towing, troubleshoot malfunctions in aircraft structures, fuel systems, landing gear, flight surfaces and controls, anti-icing, pneudraulics, engines, auxiliary power unit, and ventilation and heating systems. Perform progressive isochronal, phase, periodic, and other hourly or...

GENERAL DESCRIPTION Aerospace welders must perform welding operations on aircraft, aircraft components and aircraft engine parts DUTIES Perform fusion welding on aircraft and ground SE to a qualified Welding Procedure Specification (WPS) Perform structural fusion welding on aerospace parts and components per the requirements of specifications as prescribed by Engineering Drawings and Work Orders Fabricate manufacture-welded parts from engineering drawings without direct supervision Perform fusion welding and torch brazing for ground SE, ensuring the procedure is completed per the requirements of the national welding and brazing codes Weld a wide variety of material such as aluminum, magnesium, alloyed and low alloy steel, stainless steel and nickel alloy steels The candidate shall maintain welding certification/recertification as required and the skill and knowledge to perform one-time weld repairs which are not effected on a production...

General Description This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8. F-35 and V-22. Military aviation platform experience is a plus. Duties With oversight, assist in disassembly, repair, rework and installation of various systems and components such as wings, control surfaces, control systems, landing gear, arresting gear, fuel cells, instrumentation, and engines. Assist with installing hydraulic tubing, actuating cylinders, and cable controls. Assist in rigging, adjustment and tests on various flight systems including landing gear, flight controls, instruments, oxygen/ environmental systems and power plants. Assist in the installation of fuel system components to include self-sealing fuel cells and assist with the preservation or depreservation of aircraft or aircraft components. Take hydraulic or fuel...

**THIS POSITION IS CONTINGENT UPON CONTRACT AWARD** GENERAL DESCRIPTION: Tyonek Services Group will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Interpret written instructions, technical data, engineering drawings, and specifications to plan and lay out machining operations required for the fabrication, restoration, and modification of landing-gear components. Use Machinist hand tools, precision measuring instruments, and standard machine tools, including lathes, mills, grinders, Computer Numerical Control (CNC), and related equipment-to produce metal parts to the close tolerances required for aircraft landing-gear systems. Perform machining computations involving dimensions, tolerances, feeds, speeds, and tooling requirements; apply...

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Plan, construct and repair specialized containers and material handling items using wood, wood substitute materials or materials required by technical data. Perform standard and specialized preservation and/or packing using various techniques to ensure safe and damage free movement of various aircraft components. Aircraft components include large and unbalanced equipment, sensitive electronics, delicate instruments, industrial components, radar antennas, turbines engines and hazardous materials. Prepare, and process required documentation, special handing labels, shipping codes, and required safety data. Plan, construct and repair containers using Special...

GENERAL DESCRIPTION Must be able to remove, repair, modify, test, troubleshoot, calibrate, and install electrical systems, equipment, and accessories used in aircraft. DUTIES Make functional checks on electrical systems to ensure performance and reliability and correct malfunctions disclosed by static, ground, and flight tests Replace defective wiring and install new wiring for aircraft changes, modifications and repairs Perform work using overhaul and maintenance manuals, aircraft changes, bulletins, local directives, blueprints, and wiring and/or schematic diagrams Must be able to overhaul, repair, modify and test aircraft electrical system accessories such as motors, dynamotors, /inverters, voltage regulators, relays, cutouts, engine synchronizers, electric motor driven air compressors and activators, DC generators, AC alternators, and DC/AC electrical controls, cockpit air conditioning controls, engine temperature controls, and transistorized...

GENERAL DESCRIPTION Coats surfaces of military aircraft and components with paint, lacquer, epoxy, resin or other material, using Aerospace/aviation application techniques with spray guns, paint guns and other application devices DUTIES Removes old paint from aircraft, using liquid paint remover and scraper; Smooths surface with sandpaper and steel wool; Roughens aluminum surfaces with acid solution and steel wool to ensure that paint adheres to surface; Masks and covers portions of surfaces not to be painted; and Assemble staging, scaffolds and work stands necessary to perform the full function of the paint shop; Prepare aircraft, engines, SE and components for finish using various chemicals, detergents and solvents in conjunction with high pressure steam and water; Apply chemical conversion coating to bare substrate, sand and featheredge existing coatings using various grits of abrasives; Apply protective and decorative coating and...