53 jobs found

G ENERAL DESCRIPTION Responsible for leading 50+ employees in the production and testing of a variety of complex cable assemblies. The production of what may seem like an unimportant cannon plug connector is the link between aircraft or ground vehicle systems that propels us forward to bigger and better accomplishments. As a production supervisor, you will be leading the electrical manufacturing efforts working with talented and dedicated individuals tasked with promoting positivity and making a difference each day. Must be ready to play an active role on the floor working with the assemblers, technicians, floor leads, and engineering while supporting manufacturing schedules, quality expectations, and budget. DUTIES Provide effective leadership and direction to all assigned employees. Manage employee performance, discipline, development, and recourse planning. Understand each employee's knowledge, skills and abilities in order to leverage...

General Description This job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8. F-35 and V-22. Military aviation platform experience is a plus. This position is located on a federal facility and will require a government issued clearance. Duties Use computer systems to ensure all repair parts are accurately ordered, received and issued. Provide warehousing, inventory management and transportation skills. Ordering, receiving and issuing parts, general supplies. Current operating computer systems (i.e., CONOPS, MTO) to account for all governments supplies and inventory records for all parts in warehouses and storerooms. Utilize knowledge of material processes and Kitting procedures coupled with assembly operations utilized in production shops. Request guidance from higher level production controller or supervisor...

GENERAL DESCRIPTION Perform tire and wheel maintenance processes per the maintenance support requirements. Enters documentation of maintenance in NALCOMIS (VIDSMAFs). DUTIES The AW shall have demonstrated maintenance knowledge, experience, and working level skills/ability in: CNAFINST 4790.2 (series) requirements. Aircraft and SE tire and wheel maintenance procedures, per NAVAIR 04-10-506, Aircraft Tires and Tubes and NAVAIR 01-1A-503, Maintenance of Aeronautical Antifriction Bearings. The AW shall have a minimum of one (1)year in the last ten (10) years aircraft maintenance experience at an I level of repair (with emphasis in aviation tire and wheel maintenance processes) to the level of effort and complexity of the requirements of this SOW. Examples of acceptable experience: Aviation Structural Mechanic (AM) enlisted (E-4 through E-6). Graduate from Navy A and C schools, other military service equivalent, or civilian training and...

GENERAL DESCRIPTION Aerospace welders must perform welding operations on aircraft, aircraft components and aircraft engine parts DUTIES Perform fusion welding on aircraft and ground SE to a qualified Welding Procedure Specification (WPS) Perform structural fusion welding on aerospace parts and components per the requirements of specifications as prescribed by Engineering Drawings and Work Orders Fabricate manufacture-welded parts from engineering drawings without direct supervision Perform fusion welding and torch brazing for ground SE, ensuring the procedure is completed per the requirements of the national welding and brazing codes Weld a wide variety of material such as aluminum, magnesium, alloyed and low alloy steel, stainless steel and nickel alloy steels The candidate shall maintain welding certification/recertification as required and the skill and knowledge to perform one-time weld repairs which are not effected on a production...

GENERAL DESCRIPTION Candidate works under journeyman supervision shall assist in disassembly, repair, rework and installation of various systems and components such as wings, control surfaces, control systems, landing gear, arresting gear, fuel cells, instrumentation, ejection seats, and engines DUTIES • Shall have entry level experience and be able to assist with installing hydraulic tubing, actuating cylinders, and cable controls • Candidate will assist in rigging, adjustment and tests on various flight systems including landing gear, flight controls, instruments, oxygen/ environmental systems and power plants • Entry level experience in the installation of fuel system components to include self-sealing fuel cells and assist with the preservation or de-preservation of aircraft or aircraft components • As directed, the candidate may be required to: Take hydraulic or fuel contamination samples, Perform corrosion control treatment, Chemical or mechanical...

GENERAL DESCRIPTION This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8, T-34, F-35 and V-22. Military Intermediate level experience is a plus DUTIES Reviews blueprints, schematics, and safety procedures while complying with engineering specifications and maintenance instructions utilizing NDMS CONOPS systems. Disassemble, repair, rework and complete overhaul of various components such as Tire/Wheel assemblies, Brake systems, landing gear, shock absorbers, arresting gear to include tail hooks and launch bars. Repair engine mounts, wing support structures and various aircraft mechanisms. Rig, adjust, and calibrate aircraft slings and other support equipment for all aircraft platforms. Assist Engineers with component discrepancies and investigations. Performs final testing and certification of assemblies using...

GENERAL DESCRIPTION Work a full range of aircraft sheet metal duties including, but not limited to, disassemble, modify, repair and reassemble complex aircraft metal items & systems, including bulkheads, airframes, spars, air scoops, flaps, wings, pylons, sponsons, fuselages, skins, ribs, gussets and internal and external fuel tanks. DUTIES Candidate must be intimately familiar with all associate pneumatic and power riveting tools and sheet metal tools Analyze and evaluate structural damage to metal system and items Develop patterns using a combination of parallel and radial line development Fabricate, install, and repair a variety of items and systems made from a wide variety of metals, e.g., stainless steel, copper sheet, magnesium, honeycomb, alloys, aluminum etc. Replace sections and patch old systems Cut, bend, shape, and form metals for items that have numerous irregular angles, planes and curves with varying pitch and...

GENERAL DESCRIPTION: Will perform Field and Sustainment Level maintenance support/augmentation to include: maintenance and repair of aircraft, as well as launch and recovery of aircraft prior to and after the conduct of flight activities. Shall work in specialized shops associated with fixed base operations Field Level maintenance as well as perform troubleshooting and maintenance repairs in support of the Army National Guard AH-64D/E. DUTIES: Applies basic technical knowledge to perform simple or routine tasks following detailed instructions. Performs such tasks as replacing components, wiring circuits, repairing simple electronic equipment. Conducts testing using common instruments such as digital multi-meters, signal generators, semiconductor testers, curve tracers, and oscilloscopes. Required to read blueprints, build wire bundles, install wire bundles, use electronic test equipment, prepare aircraft for flight line inspection,...

General Description Work independently and with a team to design/develop interface test adapters, cabling, automated software test programs and associated documentation for sub-assemblies and systems. Duties Integrate test hardware and software for Units Under Test (UUTs) Develop and integrate automated tests for digital and mixed signal Electronic Circuit Assemblies. Interpret Test Requirements Specification for RF, Analog, Digital cards, and Power Supplies. Use design software to develop Printed Circuit Boards. Apply principles and techniques of electrical engineering to accomplish goals. Works under general supervision; reports to a supervisor or manager. Must be able to work creatively and independently problem solve. Other Duties as Assigned Education/Experience Requirements Bachelor's degree in engineering (Electrical, Computer, Software) preferred. Will substitute for experience. Software programming...

GENERAL DESCRIPTION The Procurement Manager is responsible for the day-to-day execution and management of procurement and subcontracting activities in support of program operations. This role ensures the timely acquisition of materials, equipment, and subcontracted services across both government (FAR/DFARS) and commercial programs, while balancing compliance-driven procurement with the best commercial practices for speed, cost efficiency, and supplier agility. The position focuses on execution, compliance, cost control, and schedule adherence, directly supporting program performance and EBITDA objectives. DUTIES Procurement & Subcontract Execution Manage full lifecycle for procurement and subcontracts: Requisitions, sourcing, solicitations (RFQ/RFP) Evaluation, negotiation, and award Administration, modifications, and closeout Ensure materials and subcontracted services are delivered in alignment with: Program schedules...

GENERAL DESCRIPTION This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8. F-35 and V-22. Military aviation platform experience is a plus. DUTIES Services, repairs, and overhauls engines to ensure worthiness Disassembles multiple type LM2500 engines or similar aircraft engines, engine assemblies and accessories, and remove tubing, fuel controls, pumps etc. as required Breaks down major assemblies in proper sequence and inspect for visual defects; determine if parts are functional and reusable; examine, evaluate, recondition and assemble subassemblies Maintains, repairs and/or tests different types of engines in aircraft test cells or maintenance shops Analyzes problems such as fuel fluctuation, compressor instability or excessive vibration and take remedial action, disassembling to the extent necessary to make...

GENERAL DESCRIPTION This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8, T-34, F-35 and V-22. Military Intermediate level experience is a plus DUTIES Reviews blueprints, schematics, and safety procedures while complying with engineering specifications and maintenance instructions utilizing NDMS CONOPS systems. Disassemble, repair, rework and complete overhaul of various components such as Tire/Wheel assemblies, Brake systems, landing gear, shock absorbers, arresting gear to include tail hooks and launch bars. Repair engine mounts, wing support structures and various aircraft mechanisms. Rig, adjust, and calibrate aircraft slings and other support equipment for all aircraft platforms. Assist Engineers with component discrepancies and investigations. Performs final testing and certification of assemblies using...

GENERAL DESCRIPTION Perform repair/rebuilding of T-56-A-14 power plants, C-2/E-2/C-130/P-3 Propeller, P-3 Auxiliary Power Units, and related components in accordance with maintenance support requirements. May perform engine test cell operations if trained and qualified as a Test Cell Operator. Enters maintenance documentation in NALCOMIS (VIDSMAFs). DUTIES Must have demonstrated maintenance knowledge, experience, and working level skills/ability: The AM-T56 shall have demonstrated maintenance knowledge, experience, and working level skills/ability in: a. I and/or D level troubleshooting and repair malfunctions in various aircraft engine and propeller systems/subsystems level. b. NALCOMIS and VIDMAFs entry and completion. The AM-T56 shall have a minimum of two (2) years' experience in the last ten (10) years in I and/or D level aviation engine, auxiliary power unit, and propeller maintenance rebuilding/restoration/repair to the level of effort and...

GENERAL DESCRIPTION Perform ordnance maintenance (handling, tracking, testing, repairing, and storing) in accordance with maintenance support requirements. Enters maintenance documentation in NALCOMIS (VIDSMAFs). DUTIES Must have demonstrated maintenance knowledge, experience, and working level skills/ability: The ETAO shall have a demonstrated working knowledge and skill in: Aviation Ordnance Equipment storage, tracking, preventative Maintenance (PM's), testing, repair and handling. All applications of NAVAIR 15-01-500 Aircraft and Naval Aircraft Ordnance Equipment Storage. Shall have completed significant military training (three years military aircraft Aviation Ordnance maintenance) with emphasis in preventative maintenance to the level of effort and complexity of requirements in this SOW. This military experience shall be exclusive of formalized training time. Examples of acceptable experience: Navy Aviation Ordnance man class or Ordnance...

GENERAL DESCRIPTION Perform SE maintenance processes per the maintenance support requirements. Enters documentation of maintenance in NALCOMIS (VIDSMAFs). DUTIES The MVMSE shall have demonstrated maintenance knowledge, experience, and working level skills/ability in: a. General knowledge of CNAFINST 4790.2 (series) requirements. b. NALCOMIS & VIDMAFs completion. The MVMSE shall have Weight Handling Equipment certification and Test Director, Hydraulic Contamination certification, and I Level SE Tire and Wheel certification. The MVMSE shall have a minimum of two (2)years in the last ten (10) years aircraft maintenance experience at an I level of repair (with two (2) years in each NEC area below emphasis in aviation support equipment repairs) and Aviation Quality Assurance Collateral Duty Inspector to the level of effort and complexity of the requirements of this SOW. Examples of acceptable experience: Navy Aviation Support Equipment Technician...

GENERAL DESCRIPTION The candidate must be able to set up and operate all types of conventional machines, computer numerically controlled (CNC) machines and related equipment in the manufacture, rework, and repair of aircraft parts and components DUTIES The candidate shall set up and perform machining operations on conventional and CNC machine tools such as grinders, milling machines, lathes, and drills Must be able set up and operate 2,3,4, and 5 axis machining centers and CNC grinders Must be familiar with the use of a variety of machine tool attachments or related equipment to perform precision machine work Maintain accuracy in accordance with requirements of blueprints, drawings, sketches, work documents, aircraft technical documents, manuals, bulletins, and directives Produce assigned work in accordance with established standards Perform all work in compliance with all safety rules and regulations in the production shop environment...

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Remove, inspect, clean and install components and parts Repair, adjust, and install components and parts and to prepare serviceable aircraft parts for return into the SBSS supply system. Hoist aircraft and install shoring under airframes and/or components on multiple MDS's for short-and long-term storage requirements. Prepare aircraft for final demilitarization by identifying and removing known or suspected hazardous materials to include asbestos, various fluids, and sealed/unsealed radioactive components. Remove major components of aircraft structure or systems such as control surfaces, fairing, access panels, doors, hatches, landing gear assemblies, engines,...

GENERAL DESCRIPTION This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8, T-34, F-35 and V-22. Military Intermediate level experience is a plus DUTIES Reviews blueprints, schematics, and safety procedures while complying with engineering specifications and maintenance instructions utilizing NDMS CONOPS systems. Disassemble, repair, rework and complete overhaul of various components such as Tire/Wheel assemblies, Brake systems, landing gear, shock absorbers, arresting gear to include tail hooks and launch bars. Repair engine mounts, wing support structures and various aircraft mechanisms. Rig, adjust, and calibrate aircraft slings and other support equipment for all aircraft platforms. Assist Engineers with component discrepancies and investigations. Performs final testing and certification of assemblies using...

General Description Leads production efforts in the manufacturing of electro-mechanical assemblies as an individual contributor. These assemblies involve various electronic assembly operations to include but not limited to SMT soldering and repairs, through-hole soldering and repairs, optical fiber, fiber cables, hybrid wiring harness assemblies, wire termination, cable harness assembly, cable harness integration into chassis and modules. This an advanced position. Duties Assembles electrical and electronic components, wiring harnesses, and other electrical assemblies and subassemblies. Manufactures electronic/electrical circuitry, electronic components (CCA's), and wiring harnesses according to Manufacturing Orders (M.O.), Drawings, Engineering Changes, Customer Specifications, and Process of Instructions (P.I.). Understand and interpret IPC/J-ST, AS, and MIL specifications as they relate to Defense/Aerospace. Procure the necessary tools, parts, and...

GENERAL DESCRIPTION Manufactures electronic assemblies by performing various operations to include but not limited to SMT soldering and repairs, through-hole soldering and repairs, wire termination, cable harness assembly and cable harness installation and box integration. DUTIES Assembles electrical and electronic components, wiring harnesses, and other electrical assemblies and subassemblies. Manufactures electronic/electrical circuitry, electronic components (CCA's), and wiring harnesses according to Manufacturing Orders (M.O.), Drawings, Engineering Changes, Customer Specifications, and Process of Instructions (P.I.). Must be familiar with and understand IPC/J-STD, AS and MIL specifications as they relate to Defense/Aerospace requirements. Maintains clean and safe working environment in line with company policies. Other Duties as Assigned EDUCATION/EXPERIENCE REQUIREMENTS High school diploma or equivalent 10+ years of...