47 jobs found

GENERAL DESCRIPTION This is job is at a Depot Level repair facility. Military aviation platform experience in the F/A-18, P-8, F-5, T-6,T-44,H-60 is a plus. EA-6B and/or T-44 experience is a must. DUTIES Maintains repairs and modifies aircraft structures and structural components of moderate difficulty Maintains and repairs aircraft components including, but not limited to, flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components Applies technical knowledge of airframe and power plant systems in determining equipment malfunctions Applies required expertise in restoring equipment condition and or operation Applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as blueprints or manufactures' manuals Make necessary entries into aircraft logs and records Disassembly, repair and assembly of aircraft structural components, such as wings and fuselage, and...

GENERAL DESCRIPTION Work a full range of aircraft sheet metal duties including, but not limited to, disassemble, modify, repair and reassemble complex aircraft metal items & systems, including bulkheads, airframes, spars, air scoops, flaps, wings, pylons, sponsons, fuselages, skins, ribs, gussets and internal and external fuel tanks. DUTIES Candidate must be intimately familiar with all associate pneumatic and power riveting tools and sheet metal tools Analyze and evaluate structural damage to metal system and items Develop patterns using a combination of parallel and radial line development Fabricate, install, and repair a variety of items and systems made from a wide variety of metals, e.g., stainless steel, copper sheet, magnesium, honeycomb, alloys, aluminum etc. Replace sections and patch old systems Cut, bend, shape, and form metals for items that have numerous irregular angles, planes and curves with varying pitch and circumference...

GENERAL DESCRIPTION Will perform DEPOT level aircraft maintenance as assigned on multiple variants of military engine platforms. Must demonstrate knowledge of military technical manuals and able to qualify for government equipment operators license as required DUTIES Disassemble multiple type aircraft engines, engine assemblies and accessories and remove tubing, fuel controls, pumps, etc. as required; Break down major assemblies in proper sequence and inspect for visual defects; Determine if parts are functional and reusable; Examine, evaluate, recondition and assemble subassemblies; Maintain, repair, and/or test different types of engines in aircraft test cells or maintenance shops; Be able to analyze problems such as fuel fluctuation, compressor instability or excessive vibration and take remedial action, disassembling to the extent necessary to make needed corrections; Have knowledge of preservation and de-preservation techniques used...

GENERAL DESCRIPTION Aerospace welders must perform welding operations on aircraft, aircraft components and aircraft engine parts DUTIES Perform fusion welding on aircraft and ground SE to a qualified Welding Procedure Specification (WPS) Perform structural fusion welding on aerospace parts and components per the requirements of specifications as prescribed by Engineering Drawings and Work Orders Fabricate manufacture-welded parts from engineering drawings without direct supervision Perform fusion welding and torch brazing for ground SE, ensuring the procedure is completed per the requirements of the national welding and brazing codes Weld a wide variety of material such as aluminum, magnesium, alloyed and low alloy steel, stainless steel and nickel alloy steels The candidate shall maintain welding certification/recertification as required and the skill and knowledge to perform one-time weld repairs which are not effected on a production...

General Description The Training Manager is responsible for the development, implementation, administration, and continuous improvement of enterprise-wide training and workforce development programs. This position ensures employees possess the knowledge, skills, certifications, and competencies required to meet operational, contractual, regulatory, and strategic business objectives. The Training Manager partners with executive leadership, Human Resources, Operations, Program Management, Quality, Safety, Security, Procurement, Contracts, Engineering, Information Technology, and Functional Departments to establish a comprehensive learning and development strategy that supports organizational growth, compliance, employee engagement, and succession planning. Duties Strategic Training & Workforce Development Develop and execute the company's enterprise training strategy aligned with business goals and workforce requirements. Establish annual training...

** THIS POSITION IS CONTINGENT UPON AWARD**   GENERAL DESCRIPTION: Tyonek Services Group (Tyonek) is an 8(a) Native American Corporation formed under the Alaska Native Claims Settlement Act of 1971 (ANCSA). We are seeking a Program Manager (PgM) who will serve as the primary interface between the company and government program authorities. This position requires extensive knowledge and experience with Depot Level Modification line, and O-Level, and I-Level maintenance support on H-1 Helicopters. This position is responsible for ensuring the required deliverables are met within the specified constraints of time and cost and to achieve the potential benefits defined in the Statement of Work. The PgM is the Tyonek representative to the US Government customer. The PgM will have the overall responsibility to ensure we provide the support the contract requires to satisfy customer requirements. This includes management of issues, risks, and change requests to ensure...

General Description Interacts with other engineering groups and customers to define, document, quote, analyze, perform, and interpret test for products, systems, components, or modifications. Develop test strategies and hardware to support production and depot level processes. Duties Reviews customer requirements and specifications and develops compliant testing Develops cost estimates for the test requirements associated with proposals Develops test plans, procedures and programs in support of customer testing Designs and develops test equipment as necessary to support test requirements Relies on extensive experience and judgment to plan and accomplish goals Documents and analyzes test cases and provides feedback and recommendations for product or design changes (DFT) Familiar with open source software and various test development software solutions Ensures testing procedures are in compliance with any required industry specific...

GENERAL DESCRIPTION The Procurement Manager is responsible for leading and managing the organization's procurement function to ensure the timely, compliant, and cost-effective acquisition of materials, equipment, services, and indirect purchases in support of company operations and customer requirements. This position oversees procurement personnel, supplier relationships, sourcing strategies, purchasing processes, and compliance with company policies and applicable government regulations. The Procurement Manager serves as a strategic business partner to Operations, Programs, Engineering, Finance, and Quality to drive supplier performance, improve procurement cycle times, reduce costs, mitigate supply chain risks, and support organizational growth. The position focuses on execution, compliance, cost control, and schedule adherence, directly supporting program performance and EBITDA objectives. DUTIES Procurement Leadership Lead, develop, and manage...

GENERAL DESCRIPTION Candidate will perform in-process, receiving, and final inspection of aerospace hardware utilizing basic inspection equipment and customer provided drawings and/or specifications. Duties Read and interpret drawings, specifications, and standards to determine product status. Use standard measuring tools such as micrometers, calipers, and height gauges. Operate a coordinate measuring machining (CMM). Select the correct tool needed to do the job, regularly make decisions on tooling requirement for specific tasks. Assist and train Mechanical Inspector I. Complete non-conformance reports as required. Complete AS9102 FAI reports. Has good communication skills and communicates effectively with coworkers. Other Duties as assigned. Education/Experience Requirements High school diploma or equivalent is required. Trade school is desirable. 4 to 7 years mechanical inspection, mechanical assembly, and/or metal...

General Description Work independently and with a team to design/develop interface test adapters, cabling, automated software test programs and associated documentation for sub-assemblies and systems. Duties Integrate test hardware and software for Units Under Test (UUTs) Develop and integrate automated tests (Test Program Sets) for digital and mixed signal Electronic Circuit Assemblies. Interpret Test Requirements Specification for RF, Analog, Digital cards, and Power Supplies. Use design software to develop Printed Circuit Boards. Apply principles and techniques of electrical engineering to accomplish goals. Works under general supervision; reports to a supervisor or manager. Must be able to work creatively and independently problem solve. Other Duties as Assigned Education/Experience Requirements Bachelor's degree in engineering (Electrical, Computer, or Software) with 2-3 years experience. Experience may be substituted...

General Description Work independently and with a team to design/develop interface test adapters, cabling, automated software test programs and associated documentation for sub-assemblies and systems. Duties Integrate test hardware and software for Units Under Test (UUTs) Develop and integrate automated tests for digital and mixed signal Electronic Circuit Assemblies. Interpret Test Requirements Specification for RF, Analog, Digital cards, and Power Supplies. Use design software to develop Printed Circuit Boards. Apply principles and techniques of electrical engineering to accomplish goals. Works under general supervision; reports to a supervisor or manager. Must be able to work creatively and independently problem solve. Other Duties as Assigned Education/Experience Requirements Bachelor's degree in engineering (Electrical, Computer, Software) preferred. Will substitute for experience. Software programming...

General Description  The Computer Engineer will develop advanced FPGA solutions that power both current and next‑generation defense systems. This role involves full‑lifecycle FPGA development, from requirements and architecture through design, verification, and implementation. The engineer will collaborate closely with software, hardware, and systems engineering teams to deliver optimized, reliable, and mission‑critical FPGA architectures tailored for performance, device utilization, power efficiency, and thermal requirements. U.S. citizenship is required. This position is located at a facility requiring special access, and the selected candidate must be able to obtain and maintain a Secret clearance. Duties Develop complex FPGA designs, including specification, architecture, implementation, and verification. Work with high‑speed I/O designs and communication protocols (PCIe, I2C, SPI, etc.). Manage and coordinate engineering efforts across multiple...

GENERAL DESCRIPTION This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8, T-34, F-35 and V-22. Military Intermediate level experience is a plus DUTIES Reviews blueprints, schematics, and safety procedures while complying with engineering specifications and maintenance instructions utilizing NDMS CONOPS systems. Disassemble, repair, rework and complete overhaul of various components such as Tire/Wheel assemblies, Brake systems, landing gear, shock absorbers, arresting gear to include tail hooks and launch bars. Repair engine mounts, wing support structures and various aircraft mechanisms. Rig, adjust, and calibrate aircraft slings and other support equipment for all aircraft platforms. Assist Engineers with component discrepancies and investigations. Performs final testing and certification of assemblies using...

General Description This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8. F-35 and V-22. Military aviation platform experience is a plus. Duties Set up and operate all types of conventional machines, computer numerically controlled (CNC) machines and related equipment in the manufacture, rework, and repair of aircraft parts and components. Set up and perform machining operations on conventional and CNC machine tools such as grinders, milling machines, lathes, and drills. Read and understand blueprints, drawings, sketches, work documents, aircraft technical documents, manuals, bulletins, and directives; produce assigned work in accordance with established standards Other duties as assigned Education/Experience Requirements High School Diploma or equivalent Minimum 4 years of aircraft machining...

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Provide direct labor support for aircraft egress systems and possess an advanced level of knowledge, skill and ability in the field. Meet the egress requirements outlined in AFI 21-102, chapter 12 and AFMCI21-100, chapter 12. Receive specialty egress training and certification for at least one of the following aircraft prior to performing on this Task Order: A-10 and F-16. May be required to receive just-in- time (JIT) training from the Government for other aircraft MDS egress system removal and installation as required. Accomplish the following functions on A-10 and F- 16, and other aircraft as required: remove/install canopy, remove/install seat/seat support...

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Service engines, fuel systems, and airframe components. Make repairs required to keep aircraft in safe operating condition; adjust, repair, or replace aircraft components; perform pre-flight, through-flight, and post-flight maintenance inspections; perform miscellaneous duties to service aircraft, clean screens and filters, grease moving parts, and check brakes. Perform aircraft jacking and towing, troubleshoot malfunctions in aircraft structures, fuel systems, landing gear, flight surfaces and controls, anti-icing, pneudraulics, engines, auxiliary power unit, and ventilation and heating systems. Perform progressive isochronal, phase, periodic, and other hourly or...

General Description The Government Property Administrator is responsible for the strategic oversight, accountability, and compliant management of government-furnished and contractor-acquired property across all Tyonek sites. This role ensures full adherence to FAR Part 45, DFARS 252, DCMA guidelines, and applicable contract requirements, while serving as the primary liaison between Tyonek and government customers on all property-related matters. The position plays a critical role in protecting company and government assets and supporting contract performance through rigorous recordkeeping, auditing, and training. Duties Track movement of property by coordinating and documenting applicable forms to accomplish changes in ownership, accountability, or location in accordance with government regulations, customer contracts, and corporate policy. Review contracts to identify and implement property requirements. Develop and implement processes and procedures...

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Perform chemical stripping of paints and primers to facilitate access for maintenance personnel to conduct depot-level modifications and repairs on a variety of aircraft, including F-16 aircraft, other routed items, and associated components. Perform comprehensive media blasting (utilizing various media), stripping, and cleaning of aircraft and aircraft components; prepare aircraft surfaces for painting; formulate coating materials; apply coatings to aircraft and aircraft components; and conduct corrosion and other relevant inspections. Operate common tools such as paint guns, sanders, plastic scrapers, high-speed grinders, hydro-blasters, various media blast...

** THIS POSITION IS CONTINGENT UPON CONTRACT AWARD**   GENERAL DESCRIPTION: Tyonek Services Group (Tyonek) is an 8(a) Native American Corporation formed under the Alaska Native Claims Settlement Act of 1971 (ANCSA). We are seeking a Program Manager (PgM) who will serve as the primary interface between the company and government program authorities. You will oversee the execution of contract requirements of the Marine Corps Prepositioning Programs and have significant responsibility for managing program resources. This position requires extensive knowledge and experience with Marine Corps logistical functions, equipment maintenance, supply chain, and Marine Corps Maritime Prepositions Force Operations. This position is responsible for ensuring the required deliverables are met within the specified constraints of time and cost and to achieve the potential benefits defined in the Statement of Work. The PgM is the Tyonek representative to the US Government customer....

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Perform chemical stripping of paints and primers to facilitate access for maintenance personnel to conduct depot-level modifications and repairs on a variety of aircraft, including F-16 aircraft, other routed items, and associated components. Perform comprehensive media blasting (utilizing various media), stripping, and cleaning of aircraft and aircraft components; prepare aircraft surfaces for painting; formulate coating materials; apply coatings to aircraft and aircraft components; and conduct corrosion and other relevant inspections. Operate common tools such as paint guns, sanders, plastic scrapers, high-speed grinders, hydro-blasters, various media blast equipment,...