19 aerospace aviation jobs found

GENERAL DESCRIPTION Aircraft Mechanic Electricians troubleshoot, repair, overhaul, modify, test, and calibrate, instruments of multiple component design. The items serviced at this level are interdependent electrical, mechanical, pneumatic, hydraulic, and/or electronic units and devices that detect, measure, record, indicate or regulate velocity, pressure, displacement, weight, temperature, airspeed, torque, resistance, voltage, and similar values and relationships. This job is at a Depot Level repair facility performing maintenance on aircraft equipment, which include, but not limited to, F/A-18, E-2/C-2, H-1, F-35 AND V-22. Military aviation experience is a plus. DUTIES Performs a variety of electrical trade functions such as testing, troubleshooting, overhauling and/or repairing of items such as generators, actuators, van-axial fans, transformer-rectifiers, supervisory controls, relaying systems, and related controls containing printed and miniaturized...

**THIS POSITION IS CONTINGENT UPON CONTRACT AWARD** GENERAL DESCRIPTION: Tyonek Services Group will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Conduct chemical stripping of paints and primers. Perform abrasive blasting on ferrous and non-ferrous materials. Prepare surfaces through sanding, grinding, mechanical abrasion, and acid etching. Apply primers, topcoats, epoxy coatings, lacquer, resin, Radar Absorbent Material (RAM), Low Observable (LO) coatings, and other authorized materials using approved application methods. Mask and protect sensitive aircraft areas. Apply markings and stenciled insignia. Inspect aircraft and components for dents, corrosion, and other surface defects. Operate required tools and equipment,...

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Provide support for performing aircraft/engine/special asset reseals as required IAW T.O. 1-1-686 and Sealing Diagrams for all assigned aircraft to be prepared for storage. Preserve aircraft, aircraft engines, and associated equipment, perform special reseals after parts removal from aircraft and for Process-In/Re-preservation by applying preservative sealant using specialized equipment. All work shall be accomplished IAW technical data/manuals, production work orders, and approved process orders. Other duties as assigned EDUCATION/EXPERIENCE REQUIREMENTS: Must have a high school diploma or equivalent Must have at least 3-5 years of applicable...

General Description Interacts with other engineering groups and customers to define, document, quote, analyze, perform, and interpret test for products, systems, components, or modifications. Develop test strategies and hardware to support production and depot level processes. Duties Reviews customer requirements and specifications and develops compliant testing Develops cost estimates for the test requirements associated with proposals Develops test plans, procedures and programs in support of customer testing Designs and develops test equipment as necessary to support test requirements Relies on extensive experience and judgment to plan and accomplish goals Documents and analyzes test cases and provides feedback and recommendations for product or design changes (DFT) Familiar with open source software and various test development software solutions Ensures testing procedures are in compliance with any required industry specific...

**THIS POSITION IS CONTINGENT UPON CONTRACT AWARD** GENERAL DESCRIPTION: Tyonek Services Group will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Responsible for timely completion of tasks assigned to Contractor personnel In Accordance With (IAW) appropriate planning and scheduling and technical documents. Supervision of contractor employees and/or work lead support in each work area for daily work assignments. Ensure that contractor employees are available for work daily. Manage scheduled leave and emergency time off for employees and properly notify the Government work area supervisor and COR. Account for manpower requirements in work areas daily to ensure workload coverage. Responsible for the reporting of any accident or...

**THIS POSITION IS CONTINGENT UPON CONTRACT AWARD** GENERAL DESCRIPTION: Tyonek Services Group will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Locate, transport, and stage materials between storage, production, and repair areas in accordance with government-established schedules, priorities, and mission requirements. Review production schedules, inventory reports, and work orders to determine material requirements, quantities, availability, and urgency, and shall coordinate daily with government supervisors and shop personnel to identify overdue materials, communicate material status, and resolve shortages that may impact production flow or aircraft readiness. Move materials using carts, hand trucks, or other approved material-handling...

**THIS POSITION IS CONTINGENT UPON CONTRACT AWARD** GENERAL DESCRIPTION: Tyonek Services Group will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Locate, transport, and stage materials between storage, production, and repair areas in accordance with government-established schedules, priorities, and mission requirements. Review production schedules, inventory reports, and work orders to determine material requirements, quantities, availability, and urgency, and shall coordinate daily with government supervisors and shop personnel to identify overdue materials, communicate material status, and resolve shortages that may impact production flow or aircraft readiness. Move materials using carts, hand trucks, or other approved material-handling...

**THIS POSITION IS CONTINGENT UPON CONTRACT AWARD** GENERAL DESCRIPTION: Tyonek Services Group will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Interpret written instructions, technical data, engineering drawings, and specifications to plan and lay out machining operations required for the fabrication, restoration, and modification of landing-gear components. Use Machinist hand tools, precision measuring instruments, and standard machine tools, including lathes, mills, grinders, Computer Numerical Control (CNC), and related equipment-to produce metal parts to the close tolerances required for aircraft landing-gear systems. Perform machining computations involving dimensions, tolerances, feeds, speeds, and tooling requirements; apply...

**THIS POSITION IS CONTINGENT UPON CONTRACT AWARD** GENERAL DESCRIPTION: Tyonek Services Group will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Interpret written instructions, technical data, engineering drawings, and specifications to plan and lay out machining operations required for the fabrication, restoration, and modification of landing-gear components. Use Machinist hand tools, precision measuring instruments, and standard machine tools, including lathes, mills, grinders, Computer Numerical Control (CNC), and related equipment-to produce metal parts to the close tolerances required for aircraft landing-gear systems. Perform machining computations involving dimensions, tolerances, feeds, speeds, and tooling requirements; apply...

**THIS POSITION IS CONTINGENT UPON CONTRACT AWARD**   GENERAL DESCRIPTION: Tyonek Services Group will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Perform maintenance, repair, overhaul, and modification of aircraft structures and mechanical systems of moderate to high complexity, including flight controls, engines, hydraulics, pneumatics, fuel systems, guns, hydrozene, batteries, hydrostats and associated mechanical components. Apply technical knowledge of airframe and power plant systems to diagnose malfunctions, determine corrective actions, and restore equipment to proper operating condition while interpreting technical documentation such as blueprints, engineering drawings, and manufacturer manuals. Possess thorough knowledge of...

**THIS POSITION IS CONTINGENT UPON CONTRACT AWARD** GENERAL DESCRIPTION: Tyonek Services Group will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Perform maintenance, repair, overhaul, and modification of aircraft structures and mechanical systems of moderate to high complexity, including flight controls, engines, hydraulics, pneumatics, fuel systems, guns, hydrozene, batteries, hydrostats and associated mechanical components. Apply technical knowledge of airframe and power plant systems to diagnose malfunctions, determine corrective actions, and restore equipment to proper operating condition while interpreting technical documentation such as blueprints, engineering drawings, and manufacturer manuals. Possess thorough knowledge of...

General Description This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8. F-35 and V-22. Military aviation platform experience is a plus. Duties Set up and operate all types of conventional machines, computer numerically controlled (CNC) machines and related equipment in the manufacture, rework, and repair of aircraft parts and components. Set up and perform machining operations on conventional and CNC machine tools such as grinders, milling machines, lathes, and drills. Read and understand blueprints, drawings, sketches, work documents, aircraft technical documents, manuals, bulletins, and directives; produce assigned work in accordance with established standards Other duties as assigned Education/Experience Requirements High School Diploma or equivalent Minimum 4 years of aircraft machining experience...

GENERAL DESCRIPTION This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8, T-34, F-35 and V-22. Military Intermediate level experience is a plus DUTIES Reviews blueprints, schematics, and safety procedures while complying with engineering specifications and maintenance instructions utilizing NDMS CONOPS systems. Disassemble, repair, rework and complete overhaul of various components such as Tire/Wheel assemblies, Brake systems, landing gear, shock absorbers, arresting gear to include tail hooks and launch bars. Repair engine mounts, wing support structures and various aircraft mechanisms. Rig, adjust, and calibrate aircraft slings and other support equipment for all aircraft platforms. Assist Engineers with component discrepancies and investigations. Performs final testing and certification of assemblies using...

GENERAL DESCRIPTION Must be able to remove, repair, modify, test, troubleshoot, calibrate, and install electrical systems, equipment, and accessories used in aircraft. DUTIES Make functional checks on electrical systems to ensure performance and reliability and correct malfunctions disclosed by static, ground, and flight tests Replace defective wiring and install new wiring for aircraft changes, modifications and repairs Perform work using overhaul and maintenance manuals, aircraft changes, bulletins, local directives, blueprints, and wiring and/or schematic diagrams Must be able to overhaul, repair, modify and test aircraft electrical system accessories such as motors, dynamotors, /inverters, voltage regulators, relays, cutouts, engine synchronizers, electric motor driven air compressors and activators, DC generators, AC alternators, and DC/AC electrical controls, cockpit air conditioning controls, engine temperature controls, and transistorized...

GENERAL DESCRIPTION Coats surfaces of military aircraft and components with paint, lacquer, epoxy, resin or other material, using Aerospace/aviation application techniques with spray guns, paint guns and other application devices DUTIES Removes old paint from aircraft, using liquid paint remover and scraper; Smooths surface with sandpaper and steel wool; Roughens aluminum surfaces with acid solution and steel wool to ensure that paint adheres to surface; Masks and covers portions of surfaces not to be painted; and Assemble staging, scaffolds and work stands necessary to perform the full function of the paint shop; Prepare aircraft, engines, SE and components for finish using various chemicals, detergents and solvents in conjunction with high pressure steam and water; Apply chemical conversion coating to bare substrate, sand and featheredge existing coatings using various grits of abrasives; Apply protective and decorative coating and...

General Description This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8. F-35 and V-22. Military aviation platform experience is a plus. Duties Set up and operate all types of conventional machines, computer numerically controlled (CNC) machines and related equipment in the manufacture, rework, and repair of aircraft parts and components. Set up and perform machining operations on conventional and CNC machine tools such as grinders, milling machines, lathes, and drills. Read and understand blueprints, drawings, sketches, work documents, aircraft technical documents, manuals, bulletins, and directives; produce assigned work in accordance with established standards Other duties as assigned Education/Experience Requirements High School Diploma or equivalent Minimum 4 years of aircraft machining...

Hanson Values Integrity | Commitment | Quality | Relationships | Innovation If you’re looking for a firm that encourages innovative thinking and challenges you every day, with an opportunity to learn and advance, a career at Hanson is right for you. The belief in sustainability within our company’s practices creates a focus on client success and partnerships that are important to our communities and our environment. We are seeking a skilled and motivated Aviation Civil Engineer to join our aviation practice. In this role, you will contribute to the design, and delivery of aviation and civil site infrastructure projects across the U.S. and internationally. You will work as part of multidisciplinary teams to provide high-quality, technically sound designs that support safe, sustainable, and efficient aviation facilities. At Hanson, we foster innovative thinking, value sustainability, and prioritize client success while making a positive impact on our communities and the...

Job Description Are You Ready to Make It Happen at Mondelēz International? Join our Mission to Lead the Future of Snacking. Make It With Pride. Strive every day to be the indispensable partner with our internal stakeholders and retailer s, encompassing both tactical execution and thought leadership , leading to profitable growth. The Mondelēz Walmart Team and Culture We are a high-performing , collaborative team driven by a competitive spirit . We bring proactive solutions to our stakeholders that are based on sales data and shopper insights. We foster a supportive team atmosphere to amplify individual strengths and curiosity . We actively engage with and give back to our community through volunteerism and outreach support. We value a diversity of talent, experiences, and backgrounds to expand our team culture. Key Responsibilities Build lasting business relationships based on trust and confidence...