54 jobs found

**THIS POSITION IS CONTINGENT UPON CONTRACT AWARD** GENERAL DESCRIPTION: Tyonek Services Group will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Conduct chemical stripping of paints and primers. Perform abrasive blasting on ferrous and non-ferrous materials. Prepare surfaces through sanding, grinding, mechanical abrasion, and acid etching. Apply primers, topcoats, epoxy coatings, lacquer, resin, Radar Absorbent Material (RAM), Low Observable (LO) coatings, and other authorized materials using approved application methods. Mask and protect sensitive aircraft areas. Apply markings and stenciled insignia. Inspect aircraft and components for dents, corrosion, and other surface defects. Operate required tools and equipment,...

**THIS POSITION IS CONTINGENT UPON CONTRACT AWARD** GENERAL DESCRIPTION: Tyonek Services Group will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Conduct chemical stripping of paints and primers. Perform abrasive blasting on ferrous and non-ferrous materials. Prepare surfaces through sanding, grinding, mechanical abrasion, and acid etching. Apply primers, topcoats, epoxy coatings, lacquer, resin, Radar Absorbent Material (RAM), Low Observable (LO) coatings, and other authorized materials using approved application methods. Mask and protect sensitive aircraft areas. Apply markings and stenciled insignia. Inspect aircraft and components for dents, corrosion, and other surface defects. Operate required tools and equipment,...

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Provide support for performing aircraft/engine/special asset reseals as required IAW T.O. 1-1-686 and Sealing Diagrams for all assigned aircraft to be prepared for storage. Preserve aircraft, aircraft engines, and associated equipment, perform special reseals after parts removal from aircraft and for Process-In/Re-preservation by applying preservative sealant using specialized equipment. All work shall be accomplished IAW technical data/manuals, production work orders, and approved process orders. Other duties as assigned EDUCATION/EXPERIENCE REQUIREMENTS: Must have a high school diploma or equivalent Must have at least 3-5 years of applicable...

**THIS POSITION IS TEMPORARY** GENERAL DESCRIPTION: Will perform UH-60 L/M aircraft maintenance as assigned. Must demonstrate comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair, and the ability to determine functionality of non-complex electrical systems. DUTIES: Maintains, repairs and modifies aircraft structures, structural components, and engines of complex to extreme difficulty. Maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components. Use technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. Solve complex problems by interpreting technical data such as blueprints or...

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Receive, store, select, move and ship general or specialized bulk and bin materials and equipment. Create, construct, and repair containers from wood or wood substitute materials; pack, preserve, and crate items for shipment and/or storage; and brace and block items for shipment. Plan and lay-out construction details and material requirements based on similar previously manufactured containers. In-process, store, and issue a variety of aircraft components and DoD special tooling equipment. Operate Materials Handling Equipment (MHE) which includes forklifts and warehouse tugs. The forklifts will be both diesel and electric powered with lift capacities up to and including...

General Description Interacts with other engineering groups and customers to define, document, quote, analyze, perform, and interpret test for products, systems, components, or modifications. Develop test strategies and hardware to support production and depot level processes. Duties Reviews customer requirements and specifications and develops compliant testing Develops cost estimates for the test requirements associated with proposals Develops test plans, procedures and programs in support of customer testing Designs and develops test equipment as necessary to support test requirements Relies on extensive experience and judgment to plan and accomplish goals Documents and analyzes test cases and provides feedback and recommendations for product or design changes (DFT) Familiar with open source software and various test development software solutions Ensures testing procedures are in compliance with any required industry specific...

GENERAL DESCRIPTION Work a full range of aircraft sheet metal duties including, but not limited to, disassemble, modify, repair and reassemble complex aircraft metal items & systems, including bulkheads, airframes, spars, air scoops, flaps, wings, pylons, sponsons, fuselages, skins, ribs, gussets and internal and external fuel tanks. DUTIES Candidate must be intimately familiar with all associate pneumatic and power riveting tools and sheet metal tools Analyze and evaluate structural damage to metal system and items Develop patterns using a combination of parallel and radial line development Fabricate, install, and repair a variety of items and systems made from a wide variety of metals, e.g., stainless steel, copper sheet, magnesium, honeycomb, alloys, aluminum etc. Replace sections and patch old systems Cut, bend, shape, and form metals for items that have numerous irregular angles, planes and curves with varying pitch and...

General Description This job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8. F-35 and V-22. Military aviation platform experience is a plus. This position is located on a federal facility and will require a government issued clearance. Duties Use computer systems to ensure all repair parts are accurately ordered, received and issued. Provide warehousing, inventory management and transportation skills. Ordering, receiving and issuing parts, general supplies. Current operating computer systems (i.e., CONOPS, MTO) to account for all governments supplies and inventory records for all parts in warehouses and storerooms. Utilize knowledge of material processes and Kitting procedures coupled with assembly operations utilized in production shops. Request guidance from higher level production controller or supervisor...

GENERAL DESCRIPTION: Will perform Field and Sustainment Level maintenance support/augmentation to include: maintenance and repair of aircraft, as well as launch and recovery of aircraft prior to and after the conduct of flight activities. Shall work in specialized shops associated with fixed base operations Field Level maintenance as well as perform troubleshooting and maintenance repairs in support of the Army National Guard AH-64D/E. DUTIES: Applies basic technical knowledge to perform simple or routine tasks following detailed instructions. Performs such tasks as replacing components, wiring circuits, repairing simple electronic equipment. Conducts testing using common instruments such as digital multi-meters, signal generators, semiconductor testers, curve tracers, and oscilloscopes. Required to read blueprints, build wire bundles, install wire bundles, use electronic test equipment, prepare aircraft for flight line inspection,...

**THIS POSITION IS CONTINGENT UPON CONTRACT AWARD** GENERAL DESCRIPTION: Tyonek Services Group will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Responsible for timely completion of tasks assigned to Contractor personnel In Accordance With (IAW) appropriate planning and scheduling and technical documents. Supervision of contractor employees and/or work lead support in each work area for daily work assignments. Ensure that contractor employees are available for work daily. Manage scheduled leave and emergency time off for employees and properly notify the Government work area supervisor and COR. Account for manpower requirements in work areas daily to ensure workload coverage. Responsible for the reporting of any accident or...

**THIS POSITION IS CONTINGENT UPON CONTRACT AWARD** GENERAL DESCRIPTION: Tyonek Services Group will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Locate, transport, and stage materials between storage, production, and repair areas in accordance with government-established schedules, priorities, and mission requirements. Review production schedules, inventory reports, and work orders to determine material requirements, quantities, availability, and urgency, and shall coordinate daily with government supervisors and shop personnel to identify overdue materials, communicate material status, and resolve shortages that may impact production flow or aircraft readiness. Move materials using carts, hand trucks, or other approved material-handling...

**THIS POSITION IS CONTINGENT UPON CONTRACT AWARD** GENERAL DESCRIPTION: Tyonek Services Group will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Locate, transport, and stage materials between storage, production, and repair areas in accordance with government-established schedules, priorities, and mission requirements. Review production schedules, inventory reports, and work orders to determine material requirements, quantities, availability, and urgency, and shall coordinate daily with government supervisors and shop personnel to identify overdue materials, communicate material status, and resolve shortages that may impact production flow or aircraft readiness. Move materials using carts, hand trucks, or other approved material-handling...

**THIS POSITION IS CONTINGENT UPON CONTRACT AWARD** GENERAL DESCRIPTION: Tyonek Services Group will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Interpret written instructions, technical data, engineering drawings, and specifications to plan and lay out machining operations required for the fabrication, restoration, and modification of landing-gear components. Use Machinist hand tools, precision measuring instruments, and standard machine tools, including lathes, mills, grinders, Computer Numerical Control (CNC), and related equipment-to produce metal parts to the close tolerances required for aircraft landing-gear systems. Perform machining computations involving dimensions, tolerances, feeds, speeds, and tooling requirements; apply...

**THIS POSITION IS CONTINGENT UPON CONTRACT AWARD** GENERAL DESCRIPTION: Tyonek Services Group will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Interpret written instructions, technical data, engineering drawings, and specifications to plan and lay out machining operations required for the fabrication, restoration, and modification of landing-gear components. Use Machinist hand tools, precision measuring instruments, and standard machine tools, including lathes, mills, grinders, Computer Numerical Control (CNC), and related equipment-to produce metal parts to the close tolerances required for aircraft landing-gear systems. Perform machining computations involving dimensions, tolerances, feeds, speeds, and tooling requirements; apply...

**THIS POSITION IS CONTINGENT UPON CONTRACT AWARD**   GENERAL DESCRIPTION: Tyonek Services Group will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Perform maintenance, repair, overhaul, and modification of aircraft structures and mechanical systems of moderate to high complexity, including flight controls, engines, hydraulics, pneumatics, fuel systems, guns, hydrozene, batteries, hydrostats and associated mechanical components. Apply technical knowledge of airframe and power plant systems to diagnose malfunctions, determine corrective actions, and restore equipment to proper operating condition while interpreting technical documentation such as blueprints, engineering drawings, and manufacturer manuals. Possess thorough knowledge of...

**THIS POSITION IS CONTINGENT UPON CONTRACT AWARD** GENERAL DESCRIPTION: Tyonek Services Group will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Perform maintenance, repair, overhaul, and modification of aircraft structures and mechanical systems of moderate to high complexity, including flight controls, engines, hydraulics, pneumatics, fuel systems, guns, hydrozene, batteries, hydrostats and associated mechanical components. Apply technical knowledge of airframe and power plant systems to diagnose malfunctions, determine corrective actions, and restore equipment to proper operating condition while interpreting technical documentation such as blueprints, engineering drawings, and manufacturer manuals. Possess thorough knowledge of...

General Description  The Computer Engineer will develop advanced FPGA solutions that power both current and next‑generation defense systems. This role involves full‑lifecycle FPGA development, from requirements and architecture through design, verification, and implementation. The engineer will collaborate closely with software, hardware, and systems engineering teams to deliver optimized, reliable, and mission‑critical FPGA architectures tailored for performance, device utilization, power efficiency, and thermal requirements. U.S. citizenship is required. This position is located at a facility requiring special access, and the selected candidate must be able to obtain and maintain a Secret clearance. Duties Develop complex FPGA designs, including specification, architecture, implementation, and verification. Work with high‑speed I/O designs and communication protocols (PCIe, I2C, SPI, etc.). Manage and coordinate engineering efforts across multiple...

General Description Work independently and with a team to design/develop interface test adapters, cabling, automated software test programs and associated documentation for sub-assemblies and systems. Duties Integrate test hardware and software for Units Under Test (UUTs) Develop and integrate automated tests (Test Program Sets) for digital and mixed signal Electronic Circuit Assemblies. Interpret Test Requirements Specification for RF, Analog, Digital cards, and Power Supplies. Use design software to develop Printed Circuit Boards. Apply principles and techniques of electrical engineering to accomplish goals. Works under general supervision; reports to a supervisor or manager. Must be able to work creatively and independently problem solve. Other Duties as Assigned Education/Experience Requirements Bachelor's degree in engineering (Electrical, Computer, or Software) with 2-3 years experience. Experience may be...

General Description Work independently and with a team to design/develop interface test adapters, cabling, automated software test programs and associated documentation for sub-assemblies and systems. Duties Integrate test hardware and software for Units Under Test (UUTs) Develop and integrate automated tests for digital and mixed signal Electronic Circuit Assemblies. Interpret Test Requirements Specification for RF, Analog, Digital cards, and Power Supplies. Use design software to develop Printed Circuit Boards. Apply principles and techniques of electrical engineering to accomplish goals. Works under general supervision; reports to a supervisor or manager. Must be able to work creatively and independently problem solve. Other Duties as Assigned Education/Experience Requirements Bachelor's degree in engineering (Electrical, Computer, Software) preferred. Will substitute for experience. Software programming...

General Description This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to F/A-18 A-G and F-35. Military aviation platform experience is a plus. This position will require a government issued clearance. Duties Perform a full range of aircraft sheet metal duties including, but not limited to, disassemble, modify, repair, and reassemble complex aircraft metal items and systems, e.g., bulkheads, airframes, spars, air scoops, wings, flaps, pylons, sponsons, fuselages, skins, ribs, gussets and fuel tanks. These items and systems have combined straight and curved edges and irregular curves and planes Analyze and evaluate structural damage to metal systems and items; develop patterns using a combination of parallel and radial line development; fabricate, install, and repair a variety of items and systems made from a wide variety of metals, e.g., stainless steel, copper sheet, magnesium, honeycomb,...