40 security representative jobs found

General Description Work independently and with a team to design/develop interface test adapters, cabling, automated software test programs and associated documentation for sub-assemblies and systems. Duties Integrate test hardware and software for Units Under Test (UUTs) Develop and integrate automated tests (Test Program Sets) for digital and mixed signal Electronic Circuit Assemblies. Interpret Test Requirements Specification for RF, Analog, Digital cards, and Power Supplies. Use design software to develop Printed Circuit Boards. Apply principles and techniques of electrical engineering to accomplish goals. Works under general supervision; reports to a supervisor or manager. Must be able to work creatively and independently problem solve. Other Duties as Assigned Education/Experience Requirements Bachelor's degree in engineering (Electrical, Computer, or Software) with 2-3 years experience. Experience may be...

General Description Work independently and with a team to design/develop interface test adapters, cabling, automated software test programs and associated documentation for sub-assemblies and systems. Duties Integrate test hardware and software for Units Under Test (UUTs) Develop and integrate automated tests for digital and mixed signal Electronic Circuit Assemblies. Interpret Test Requirements Specification for RF, Analog, Digital cards, and Power Supplies. Use design software to develop Printed Circuit Boards. Apply principles and techniques of electrical engineering to accomplish goals. Works under general supervision; reports to a supervisor or manager. Must be able to work creatively and independently problem solve. Other Duties as Assigned Education/Experience Requirements Bachelor's degree in engineering (Electrical, Computer, Software) preferred. Will substitute for experience. Software programming...

GENERAL DESCRIPTION The Procurement Manager is responsible for the day-to-day execution and management of procurement and subcontracting activities in support of program operations. This role ensures the timely acquisition of materials, equipment, and subcontracted services across both government (FAR/DFARS) and commercial programs, while balancing compliance-driven procurement with the best commercial practices for speed, cost efficiency, and supplier agility. The position focuses on execution, compliance, cost control, and schedule adherence, directly supporting program performance and EBITDA objectives. DUTIES Procurement & Subcontract Execution Manage full lifecycle for procurement and subcontracts: Requisitions, sourcing, solicitations (RFQ/RFP) Evaluation, negotiation, and award Administration, modifications, and closeout Ensure materials and subcontracted services are delivered in alignment with: Program schedules...

GENERAL DESCRIPTION Perform repair/rebuilding of T-56-A-14 power plants, C-2/E-2/C-130/P-3 Propeller, P-3 Auxiliary Power Units, and related components in accordance with maintenance support requirements. May perform engine test cell operations if trained and qualified as a Test Cell Operator. Enters maintenance documentation in NALCOMIS (VIDSMAFs). DUTIES Must have demonstrated maintenance knowledge, experience, and working level skills/ability: The AM-T56 shall have demonstrated maintenance knowledge, experience, and working level skills/ability in: a. I and/or D level troubleshooting and repair malfunctions in various aircraft engine and propeller systems/subsystems level. b. NALCOMIS and VIDMAFs entry and completion. The AM-T56 shall have a minimum of two (2) years' experience in the last ten (10) years in I and/or D level aviation engine, auxiliary power unit, and propeller maintenance rebuilding/restoration/repair to the level of effort and...

GENERAL DESCRIPTION Perform ordnance maintenance (handling, tracking, testing, repairing, and storing) in accordance with maintenance support requirements. Enters maintenance documentation in NALCOMIS (VIDSMAFs). DUTIES Must have demonstrated maintenance knowledge, experience, and working level skills/ability: The ETAO shall have a demonstrated working knowledge and skill in: Aviation Ordnance Equipment storage, tracking, preventative Maintenance (PM's), testing, repair and handling. All applications of NAVAIR 15-01-500 Aircraft and Naval Aircraft Ordnance Equipment Storage. Shall have completed significant military training (three years military aircraft Aviation Ordnance maintenance) with emphasis in preventative maintenance to the level of effort and complexity of requirements in this SOW. This military experience shall be exclusive of formalized training time. Examples of acceptable experience: Navy Aviation Ordnance man class or Ordnance...

GENERAL DESCRIPTION Perform SE maintenance processes per the maintenance support requirements. Enters documentation of maintenance in NALCOMIS (VIDSMAFs). DUTIES The MVMSE shall have demonstrated maintenance knowledge, experience, and working level skills/ability in: a. General knowledge of CNAFINST 4790.2 (series) requirements. b. NALCOMIS & VIDMAFs completion. The MVMSE shall have Weight Handling Equipment certification and Test Director, Hydraulic Contamination certification, and I Level SE Tire and Wheel certification. The MVMSE shall have a minimum of two (2)years in the last ten (10) years aircraft maintenance experience at an I level of repair (with two (2) years in each NEC area below emphasis in aviation support equipment repairs) and Aviation Quality Assurance Collateral Duty Inspector to the level of effort and complexity of the requirements of this SOW. Examples of acceptable experience: Navy Aviation Support Equipment Technician...

GENERAL DESCRIPTION The candidate must be able to set up and operate all types of conventional machines, computer numerically controlled (CNC) machines and related equipment in the manufacture, rework, and repair of aircraft parts and components DUTIES The candidate shall set up and perform machining operations on conventional and CNC machine tools such as grinders, milling machines, lathes, and drills Must be able set up and operate 2,3,4, and 5 axis machining centers and CNC grinders Must be familiar with the use of a variety of machine tool attachments or related equipment to perform precision machine work Maintain accuracy in accordance with requirements of blueprints, drawings, sketches, work documents, aircraft technical documents, manuals, bulletins, and directives Produce assigned work in accordance with established standards Perform all work in compliance with all safety rules and regulations in the production shop environment...

General Description Leads production efforts in the manufacturing of electro-mechanical assemblies as an individual contributor. These assemblies involve various electronic assembly operations to include but not limited to SMT soldering and repairs, through-hole soldering and repairs, optical fiber, fiber cables, hybrid wiring harness assemblies, wire termination, cable harness assembly, cable harness integration into chassis and modules. This an advanced position. Duties Assembles electrical and electronic components, wiring harnesses, and other electrical assemblies and subassemblies. Manufactures electronic/electrical circuitry, electronic components (CCA's), and wiring harnesses according to Manufacturing Orders (M.O.), Drawings, Engineering Changes, Customer Specifications, and Process of Instructions (P.I.). Understand and interpret IPC/J-ST, AS, and MIL specifications as they relate to Defense/Aerospace. Procure the necessary tools, parts, and...

GENERAL DESCRIPTION Manufactures electronic assemblies by performing various operations to include but not limited to SMT soldering and repairs, through-hole soldering and repairs, wire termination, cable harness assembly and cable harness installation and box integration. DUTIES Assembles electrical and electronic components, wiring harnesses, and other electrical assemblies and subassemblies. Manufactures electronic/electrical circuitry, electronic components (CCA's), and wiring harnesses according to Manufacturing Orders (M.O.), Drawings, Engineering Changes, Customer Specifications, and Process of Instructions (P.I.). Must be familiar with and understand IPC/J-STD, AS and MIL specifications as they relate to Defense/Aerospace requirements. Maintains clean and safe working environment in line with company policies. Other Duties as Assigned EDUCATION/EXPERIENCE REQUIREMENTS High school diploma or equivalent 10+ years of...

GENERAL DESCRIPTION Performs electronic assembly operations such as SMT soldering and repairs, through hole soldering and repairs, wire termination, cable harness assembly and cable harness installation into chassis and modules. DUTIES Assembles electrical and electronic components, wiring harnesses, and other electrical assemblies and subassemblies. Manufactures electronic/electrical circuitry, electronic components (CCA's), and wiring harnesses according to Manufacturing Orders (M.O.), Drawings, Engineering Changes, Customer Specifications, and Process Instructions (P.I.). Cable harness build experience both crimp and solder Knowledge of lean manufacturing, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. Must be familiar with and understand IPC/J-STD, AS and MIL specifications as they relate to Defense/Aerospace requirements in CCA's and Harness build. Ability to develop...

GENERAL DESCRIPTION Assemble, test, and rework cables, harnesses, mechanical and electromechanical products. DUTIES Assemble products according to routers, drawings, and all other applicable documentation Operate automatic stripping, crimping, wire cutting, and basic test equipment Maintain a clean and safe working environment Work together cohesively with co-workers to ensure a constructive teaming environment Maintain acceptable test pass rates and quality acceptance rates. Use manual hand tools for assembly and repetitive operation Checks stock bins for adequate supplies of subassemblies, parts, and fasteners for the particular run. Checks for designated carton pack. Contacts material handler if shortages exists or incorrect parts are in bin. From experience, resolves assembly and packing problems. Reports other problems to the Production Manager for assistance. Involved with productivity and quality improvement efforts...

General Description This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8. F-35 and V-22. Military aviation platform experience is a plus. Duties Set up and operate all types of conventional machines, computer numerically controlled (CNC) machines and related equipment in the manufacture, rework, and repair of aircraft parts and components. Set up and perform machining operations on conventional and CNC machine tools such as grinders, milling machines, lathes, and drills. Read and understand blueprints, drawings, sketches, work documents, aircraft technical documents, manuals, bulletins, and directives; produce assigned work in accordance with established standards Other duties as assigned Education/Experience Requirements High School Diploma or equivalent Minimum 4 years of aircraft machining...

GENERAL DESCRIPTION Performs electronic assembly, wire termination, cable harness assembly and cable harness installation into chassis and modules. DUTIES Assembles electrical and electronic components, wiring harnesses, and other electrical assemblies and subassemblies according to instructions and drawings. Kit assemblies, parts, and fasteners, for the particular run. Maintain clean and safe working environment in line with company policies. Other Duties as Assigned EDUCATION/EXPERIENCE REQUIREMENTS High school diploma or equivalent 0-2 years' of general experience in the field or in a related area Cable harness build experience preferred Soldering experience a plus Ability to obtain/maintain IPC-620 and J-STD certifications. General Computer skills. Attention to detail. Must be able to read and write English. We maintain a drug-free workplace and perform post offer, pre-employment substance abuse...

GENERAL DESCRIPTION  Provides quality assurance inspections for purchased product including dimensional checks and paperwork review.  DUTIES Verifying that quantities, revision levels, and paperwork all match purchase order requirements Verifying ESD packaging as flowed down on purchase order and complying to ESD protocol for ESD sensitive product. Inspecting supplied product to engineering drawings provided by customer. Verifying shelf-life requirements and creating shelf life labels for chemicals, paints, and adhesives Documenting and labeling non-conforming product from suppliers for MRB. Managing material flow through Receiving Inspection area including priority items. Evaluating product for suspect counterfeiting using Tyonek suspected Unapproved Parts Avoidance Plan as a guideline. Create AS9102 reports for purchased product if required Input receiving inspection data into Costpoint (ERP system) to show current status of...

General Description This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8. F-35 and V-22. Military aviation platform experience is a plus. Duties With oversight, assist in disassembly, repair, rework and installation of various systems and components such as wings, control surfaces, control systems, landing gear, arresting gear, fuel cells, instrumentation, and engines. Assist with installing hydraulic tubing, actuating cylinders, and cable controls. Assist in rigging, adjustment and tests on various flight systems including landing gear, flight controls, instruments, oxygen/ environmental systems and power plants. Assist in the installation of fuel system components to include self-sealing fuel cells and assist with the preservation or depreservation of aircraft or aircraft components. Take hydraulic or fuel...

General Description Records and maintains control of all inventory items purchased and produced. Ensures compliance with established internal control procedures. Duties Receive and enter verification data for inventory. Unpack and perform quality and quantity checks on manufacturer. Put away all inventory receipts. Replenishment and validation of all inventories. Perform cycle counts of product inventory. Properly label product locations. Make adjustments to inventory in database, if applicable, as requested. Must be flexible to accept work assignments in different areas as needed and required. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Primary functions do not require exercising independent judgment. Other duties as assigned Education/Experience Requirements...

** THIS POSITION IS CONTINGENT UPON AWARD**   GENERAL DESCRIPTION: Tyonek Services Group (Tyonek) is an 8(a) Native American Corporation formed under the Alaska Native Claims Settlement Act of 1971 (ANCSA). We are seeking a Program Manager (PgM) who will serve as the primary interface between the company and government program authorities. You will oversee the execution of contract requirements of the Marine Corps Prepositioning Programs and have significant responsibility for managing program resources. This position requires extensive knowledge and experience with Depot Level Modification line, and O-Level, and I-Level maintenance support on H-1 Helicopters. This position is responsible for ensuring the required deliverables are met within the specified constraints of time and cost and to achieve the potential benefits defined in the Statement of Work. The PgM is the Tyonek representative to the US Government customer. The PgM will have the overall...

General Description The Government Property Administrator is responsible for the strategic oversight, accountability, and compliant management of government-furnished and contractor-acquired property across all Tyonek sites. This role ensures full adherence to FAR Part 45, DFARS 252, DCMA guidelines, and applicable contract requirements, while serving as the primary liaison between Tyonek and government customers on all property-related matters. The position plays a critical role in protecting company and government assets and supporting contract performance through rigorous recordkeeping, auditing, and training. Duties Track movement of property by coordinating and documenting applicable forms to accomplish changes in ownership, accountability, or location in accordance with government regulations, customer contracts, and corporate policy. Review contracts to identify and implement property requirements. Develop and implement processes and procedures...

General Description Records and maintains control of all inventory items purchased and produced. Ensures compliance with established internal control procedures. Duties Receive and enter verification data for inventory. Unpack and perform quality and quantity checks on manufacturer. Put away all inventory receipts. Replenishment and validation of all inventories. Perform cycle counts of product inventory. Properly label product locations. Make adjustments to inventory in database, if applicable, as requested. Must be flexible to accept work assignments in different areas as needed and required. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Primary functions do not require exercising independent judgment. Other duties as assigned Education/Experience Requirements...

General Description Records and maintains control of all inventory items purchased and produced. Duties Ensures compliance with established internal control procedures Receive and enter verification data for inventory Unpack and perform quality and quantity checks on manufacturer Put away all inventory receipts. Replenishment and validation of all inventories. Perform cycle counts of product inventory Properly label product locations. Make adjustments to inventory in database as required. Must be flexible to accept work assignments in different areas as needed and required. Familiar with a variety of the field's concepts, practices, and procedures. Relies on judgment to plan and accomplish goals. Directs and leads the work of others. A certain degree of creativity and latitude is required. Other Duties as assigned Education/Experience Requirements High school diploma or equivalent Requires at...