10 mechanic 2 jobs found

GENERAL DESCRIPTION This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8, T-34, F-35 and V-22. Military Intermediate level experience is a plus DUTIES Reviews blueprints, schematics, and safety procedures while complying with engineering specifications and maintenance instructions utilizing NDMS CONOPS systems. Disassemble, repair, rework and complete overhaul of various components such as Tire/Wheel assemblies, Brake systems, landing gear, shock absorbers, arresting gear to include tail hooks and launch bars. Repair engine mounts, wing support structures and various aircraft mechanisms. Rig, adjust, and calibrate aircraft slings and other support equipment for all aircraft platforms. Assist Engineers with component discrepancies and investigations. Performs final testing and certification of assemblies using...

GENERAL DESCRIPTION This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8. F-35 and V-22. Military aviation platform experience is a plus. DUTIES Perform a full range of aircraft sheet metal duties including, but not limited to, disassemble, modify, repair, and reassemble complex aircraft metal items and systems, e.g., bulkheads, airframes, spars, air scoops, wings, flaps, pylons, sponsons, fuselages, skins, ribs, gussets and fuel tanks. These items and systems have combined straight and curved edges and irregular curves and planes. Analyze and evaluate structural damage to metal systems and items; develop patterns using a combination of parallel and radial line development; fabricate, install, and repair a variety of items and systems made from a wide variety of metals, e.g., stainless steel, copper sheet, magnesium, honeycomb,...

GENERAL DESCRIPTION This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8, T-34, F-35 and V-22. Military Intermediate level experience is a plus DUTIES Reviews blueprints, schematics, and safety procedures while complying with engineering specifications and maintenance instructions utilizing NDMS CONOPS systems. Disassemble, repair, rework and complete overhaul of various components such as Tire/Wheel assemblies, Brake systems, landing gear, shock absorbers, arresting gear to include tail hooks and launch bars. Repair engine mounts, wing support structures and various aircraft mechanisms. Rig, adjust, and calibrate aircraft slings and other support equipment for all aircraft platforms. Assist Engineers with component discrepancies and investigations. Performs final testing and certification of assemblies using...

GENERAL DESCRIPTION This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8, T-34, F-35 and V-22. Military Intermediate level experience is a plus DUTIES Reviews blueprints, schematics, and safety procedures while complying with engineering specifications and maintenance instructions utilizing NDMS CONOPS systems. Disassemble, repair, rework and complete overhaul of various components such as Tire/Wheel assemblies, Brake systems, landing gear, shock absorbers, arresting gear to include tail hooks and launch bars. Repair engine mounts, wing support structures and various aircraft mechanisms. Rig, adjust, and calibrate aircraft slings and other support equipment for all aircraft platforms. Assist Engineers with component discrepancies and investigations. Performs final testing and certification of assemblies using...

GENERAL DESCRIPTION Perform repair/rebuilding of T-56-A-14 power plants, C-2/E-2/C-130/P-3 Propeller, P-3 Auxiliary Power Units, and related components in accordance with maintenance support requirements. May perform engine test cell operations if trained and qualified as a Test Cell Operator. Enters maintenance documentation in NALCOMIS (VIDSMAFs). DUTIES Must have demonstrated maintenance knowledge, experience, and working level skills/ability: The AM-T56 shall have demonstrated maintenance knowledge, experience, and working level skills/ability in: a. I and/or D level troubleshooting and repair malfunctions in various aircraft engine and propeller systems/subsystems level. b. NALCOMIS and VIDMAFs entry and completion. The AM-T56 shall have a minimum of two (2) years' experience in the last ten (10) years in I and/or D level aviation engine, auxiliary power unit, and propeller maintenance rebuilding/restoration/repair to the level of effort and...

GENERAL DESCRIPTION Perform SE maintenance processes per the maintenance support requirements. Enters documentation of maintenance in NALCOMIS (VIDSMAFs). DUTIES The MVMSE shall have demonstrated maintenance knowledge, experience, and working level skills/ability in: a. General knowledge of CNAFINST 4790.2 (series) requirements. b. NALCOMIS & VIDMAFs completion. The MVMSE shall have Weight Handling Equipment certification and Test Director, Hydraulic Contamination certification, and I Level SE Tire and Wheel certification. The MVMSE shall have a minimum of two (2)years in the last ten (10) years aircraft maintenance experience at an I level of repair (with two (2) years in each NEC area below emphasis in aviation support equipment repairs) and Aviation Quality Assurance Collateral Duty Inspector to the level of effort and complexity of the requirements of this SOW. Examples of acceptable experience: Navy Aviation Support Equipment Technician...

General Description This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to F/A-18 A-G and F-35. Military aviation platform experience is a plus. This position will require a government issued clearance. Duties Perform a full range of aircraft sheet metal duties including, but not limited to, disassemble, modify, repair, and reassemble complex aircraft metal items and systems, e.g., bulkheads, airframes, spars, air scoops, wings, flaps, pylons, sponsons, fuselages, skins, ribs, gussets and fuel tanks. These items and systems have combined straight and curved edges and irregular curves and planes Analyze and evaluate structural damage to metal systems and items; develop patterns using a combination of parallel and radial line development; fabricate, install, and repair a variety of items and systems made from a wide variety of metals, e.g., stainless steel, copper sheet, magnesium, honeycomb,...

GENERAL DESCRIPTION Candidate works under journeyman supervision shall assist in disassembly, repair, rework and installation of various systems and components such as wings, control surfaces, control systems, landing gear, arresting gear, fuel cells, instrumentation, ejection seats, and engines DUTIES • Shall have entry level experience and be able to assist with installing hydraulic tubing, actuating cylinders, and cable controls • Candidate will assist in rigging, adjustment and tests on various flight systems including landing gear, flight controls, instruments, oxygen/ environmental systems and power plants • Entry level experience in the installation of fuel system components to include self-sealing fuel cells and assist with the preservation or de-preservation of aircraft or aircraft components • As directed, the candidate may be required to: Take hydraulic or fuel contamination samples, Perform corrosion control treatment, Chemical or mechanical...

General Description This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8. F-35 and V-22. Military aviation platform experience is a plus. Duties With oversight, assist in disassembly, repair, rework and installation of various systems and components such as wings, control surfaces, control systems, landing gear, arresting gear, fuel cells, instrumentation, and engines. Assist with installing hydraulic tubing, actuating cylinders, and cable controls. Assist in rigging, adjustment and tests on various flight systems including landing gear, flight controls, instruments, oxygen/ environmental systems and power plants. Assist in the installation of fuel system components to include self-sealing fuel cells and assist with the preservation or depreservation of aircraft or aircraft components. Take hydraulic or fuel...

GENERAL DESCRIPTION Assemble, test, and rework cables, harnesses, mechanical and electromechanical products. DUTIES Assemble products according to routers, drawings, and all other applicable documentation Operate automatic stripping, crimping, wire cutting, and basic test equipment Maintain a clean and safe working environment Work together cohesively with co-workers to ensure a constructive teaming environment Maintain acceptable test pass rates and quality acceptance rates. Use manual hand tools for assembly and repetitive operation Checks stock bins for adequate supplies of subassemblies, parts, and fasteners for the particular run. Checks for designated carton pack. Contacts material handler if shortages exists or incorrect parts are in bin. From experience, resolves assembly and packing problems. Reports other problems to the Production Manager for assistance. Involved with productivity and quality improvement efforts...