50 education jobs found

GENERAL DESCRIPTION Work a full range of aircraft sheet metal duties including, but not limited to, disassemble, modify, repair and reassemble complex aircraft metal items & systems, including bulkheads, airframes, spars, air scoops, flaps, wings, pylons, sponsons, fuselages, skins, ribs, gussets and internal and external fuel tanks. DUTIES Candidate must be intimately familiar with all associate pneumatic and power riveting tools and sheet metal tools Analyze and evaluate structural damage to metal system and items Develop patterns using a combination of parallel and radial line development Fabricate, install, and repair a variety of items and systems made from a wide variety of metals, e.g., stainless steel, copper sheet, magnesium, honeycomb, alloys, aluminum etc. Replace sections and patch old systems Cut, bend, shape, and form metals for items that have numerous irregular angles, planes and curves with varying pitch and...

GENERAL DESCRIPTION: Will perform Field and Sustainment Level maintenance support/augmentation to include: maintenance and repair of aircraft, as well as launch and recovery of aircraft prior to and after the conduct of flight activities. Shall work in specialized shops associated with fixed base operations Field Level maintenance as well as perform troubleshooting and maintenance repairs in support of the Army National Guard AH-64D/E. DUTIES: Applies basic technical knowledge to perform simple or routine tasks following detailed instructions. Performs such tasks as replacing components, wiring circuits, repairing simple electronic equipment. Conducts testing using common instruments such as digital multi-meters, signal generators, semiconductor testers, curve tracers, and oscilloscopes. Required to read blueprints, build wire bundles, install wire bundles, use electronic test equipment, prepare aircraft for flight line inspection,...

General Description Work independently and with a team to design/develop interface test adapters, cabling, automated software test programs and associated documentation for sub-assemblies and systems. Duties Integrate test hardware and software for Units Under Test (UUTs) Develop and integrate automated tests for digital and mixed signal Electronic Circuit Assemblies. Interpret Test Requirements Specification for RF, Analog, Digital cards, and Power Supplies. Use design software to develop Printed Circuit Boards. Apply principles and techniques of electrical engineering to accomplish goals. Works under general supervision; reports to a supervisor or manager. Must be able to work creatively and independently problem solve. Other Duties as Assigned Education/Experience Requirements Bachelor's degree in engineering (Electrical, Computer, Software) preferred. Will substitute for experience. Software programming...

GENERAL DESCRIPTION The Procurement Manager is responsible for the day-to-day execution and management of procurement and subcontracting activities in support of program operations. This role ensures the timely acquisition of materials, equipment, and subcontracted services across both government (FAR/DFARS) and commercial programs, while balancing compliance-driven procurement with the best commercial practices for speed, cost efficiency, and supplier agility. The position focuses on execution, compliance, cost control, and schedule adherence, directly supporting program performance and EBITDA objectives. DUTIES Procurement & Subcontract Execution Manage full lifecycle for procurement and subcontracts: Requisitions, sourcing, solicitations (RFQ/RFP) Evaluation, negotiation, and award Administration, modifications, and closeout Ensure materials and subcontracted services are delivered in alignment with: Program schedules...

GENERAL DESCRIPTION This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8. F-35 and V-22. Military aviation platform experience is a plus. DUTIES Services, repairs, and overhauls engines to ensure worthiness Disassembles multiple type LM2500 engines or similar aircraft engines, engine assemblies and accessories, and remove tubing, fuel controls, pumps etc. as required Breaks down major assemblies in proper sequence and inspect for visual defects; determine if parts are functional and reusable; examine, evaluate, recondition and assemble subassemblies Maintains, repairs and/or tests different types of engines in aircraft test cells or maintenance shops Analyzes problems such as fuel fluctuation, compressor instability or excessive vibration and take remedial action, disassembling to the extent necessary to make...

GENERAL DESCRIPTION This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8, T-34, F-35 and V-22. Military Intermediate level experience is a plus DUTIES Reviews blueprints, schematics, and safety procedures while complying with engineering specifications and maintenance instructions utilizing NDMS CONOPS systems. Disassemble, repair, rework and complete overhaul of various components such as Tire/Wheel assemblies, Brake systems, landing gear, shock absorbers, arresting gear to include tail hooks and launch bars. Repair engine mounts, wing support structures and various aircraft mechanisms. Rig, adjust, and calibrate aircraft slings and other support equipment for all aircraft platforms. Assist Engineers with component discrepancies and investigations. Performs final testing and certification of assemblies using...

GENERAL DESCRIPTION Perform repair/rebuilding of T-56-A-14 power plants, C-2/E-2/C-130/P-3 Propeller, P-3 Auxiliary Power Units, and related components in accordance with maintenance support requirements. May perform engine test cell operations if trained and qualified as a Test Cell Operator. Enters maintenance documentation in NALCOMIS (VIDSMAFs). DUTIES Must have demonstrated maintenance knowledge, experience, and working level skills/ability: The AM-T56 shall have demonstrated maintenance knowledge, experience, and working level skills/ability in: a. I and/or D level troubleshooting and repair malfunctions in various aircraft engine and propeller systems/subsystems level. b. NALCOMIS and VIDMAFs entry and completion. The AM-T56 shall have a minimum of two (2) years' experience in the last ten (10) years in I and/or D level aviation engine, auxiliary power unit, and propeller maintenance rebuilding/restoration/repair to the level of effort and...

GENERAL DESCRIPTION Perform ordnance maintenance (handling, tracking, testing, repairing, and storing) in accordance with maintenance support requirements. Enters maintenance documentation in NALCOMIS (VIDSMAFs). DUTIES Must have demonstrated maintenance knowledge, experience, and working level skills/ability: The ETAO shall have a demonstrated working knowledge and skill in: Aviation Ordnance Equipment storage, tracking, preventative Maintenance (PM's), testing, repair and handling. All applications of NAVAIR 15-01-500 Aircraft and Naval Aircraft Ordnance Equipment Storage. Shall have completed significant military training (three years military aircraft Aviation Ordnance maintenance) with emphasis in preventative maintenance to the level of effort and complexity of requirements in this SOW. This military experience shall be exclusive of formalized training time. Examples of acceptable experience: Navy Aviation Ordnance man class or Ordnance...

GENERAL DESCRIPTION Perform SE maintenance processes per the maintenance support requirements. Enters documentation of maintenance in NALCOMIS (VIDSMAFs). DUTIES The MVMSE shall have demonstrated maintenance knowledge, experience, and working level skills/ability in: a. General knowledge of CNAFINST 4790.2 (series) requirements. b. NALCOMIS & VIDMAFs completion. The MVMSE shall have Weight Handling Equipment certification and Test Director, Hydraulic Contamination certification, and I Level SE Tire and Wheel certification. The MVMSE shall have a minimum of two (2)years in the last ten (10) years aircraft maintenance experience at an I level of repair (with two (2) years in each NEC area below emphasis in aviation support equipment repairs) and Aviation Quality Assurance Collateral Duty Inspector to the level of effort and complexity of the requirements of this SOW. Examples of acceptable experience: Navy Aviation Support Equipment Technician...

GENERAL DESCRIPTION The candidate must be able to set up and operate all types of conventional machines, computer numerically controlled (CNC) machines and related equipment in the manufacture, rework, and repair of aircraft parts and components DUTIES The candidate shall set up and perform machining operations on conventional and CNC machine tools such as grinders, milling machines, lathes, and drills Must be able set up and operate 2,3,4, and 5 axis machining centers and CNC grinders Must be familiar with the use of a variety of machine tool attachments or related equipment to perform precision machine work Maintain accuracy in accordance with requirements of blueprints, drawings, sketches, work documents, aircraft technical documents, manuals, bulletins, and directives Produce assigned work in accordance with established standards Perform all work in compliance with all safety rules and regulations in the production shop environment...

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Remove, inspect, clean and install components and parts Repair, adjust, and install components and parts and to prepare serviceable aircraft parts for return into the SBSS supply system. Hoist aircraft and install shoring under airframes and/or components on multiple MDS's for short-and long-term storage requirements. Prepare aircraft for final demilitarization by identifying and removing known or suspected hazardous materials to include asbestos, various fluids, and sealed/unsealed radioactive components. Remove major components of aircraft structure or systems such as control surfaces, fairing, access panels, doors, hatches, landing gear assemblies, engines,...

GENERAL DESCRIPTION This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8, T-34, F-35 and V-22. Military Intermediate level experience is a plus DUTIES Reviews blueprints, schematics, and safety procedures while complying with engineering specifications and maintenance instructions utilizing NDMS CONOPS systems. Disassemble, repair, rework and complete overhaul of various components such as Tire/Wheel assemblies, Brake systems, landing gear, shock absorbers, arresting gear to include tail hooks and launch bars. Repair engine mounts, wing support structures and various aircraft mechanisms. Rig, adjust, and calibrate aircraft slings and other support equipment for all aircraft platforms. Assist Engineers with component discrepancies and investigations. Performs final testing and certification of assemblies using...

General Description Leads production efforts in the manufacturing of electro-mechanical assemblies as an individual contributor. These assemblies involve various electronic assembly operations to include but not limited to SMT soldering and repairs, through-hole soldering and repairs, optical fiber, fiber cables, hybrid wiring harness assemblies, wire termination, cable harness assembly, cable harness integration into chassis and modules. This an advanced position. Duties Assembles electrical and electronic components, wiring harnesses, and other electrical assemblies and subassemblies. Manufactures electronic/electrical circuitry, electronic components (CCA's), and wiring harnesses according to Manufacturing Orders (M.O.), Drawings, Engineering Changes, Customer Specifications, and Process of Instructions (P.I.). Understand and interpret IPC/J-ST, AS, and MIL specifications as they relate to Defense/Aerospace. Procure the necessary tools, parts, and...

GENERAL DESCRIPTION Manufactures electronic assemblies by performing various operations to include but not limited to SMT soldering and repairs, through-hole soldering and repairs, wire termination, cable harness assembly and cable harness installation and box integration. DUTIES Assembles electrical and electronic components, wiring harnesses, and other electrical assemblies and subassemblies. Manufactures electronic/electrical circuitry, electronic components (CCA's), and wiring harnesses according to Manufacturing Orders (M.O.), Drawings, Engineering Changes, Customer Specifications, and Process of Instructions (P.I.). Must be familiar with and understand IPC/J-STD, AS and MIL specifications as they relate to Defense/Aerospace requirements. Maintains clean and safe working environment in line with company policies. Other Duties as Assigned EDUCATION/EXPERIENCE REQUIREMENTS High school diploma or equivalent 10+ years of...

GENERAL DESCRIPTION Performs electronic assembly operations such as SMT soldering and repairs, through hole soldering and repairs, wire termination, cable harness assembly and cable harness installation into chassis and modules. DUTIES Assembles electrical and electronic components, wiring harnesses, and other electrical assemblies and subassemblies. Manufactures electronic/electrical circuitry, electronic components (CCA's), and wiring harnesses according to Manufacturing Orders (M.O.), Drawings, Engineering Changes, Customer Specifications, and Process Instructions (P.I.). Cable harness build experience both crimp and solder Knowledge of lean manufacturing, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. Must be familiar with and understand IPC/J-STD, AS and MIL specifications as they relate to Defense/Aerospace requirements in CCA's and Harness build. Ability to develop...

GENERAL DESCRIPTION Assemble, test, and rework cables, harnesses, mechanical and electromechanical products. DUTIES Assemble products according to routers, drawings, and all other applicable documentation Operate automatic stripping, crimping, wire cutting, and basic test equipment Maintain a clean and safe working environment Work together cohesively with co-workers to ensure a constructive teaming environment Maintain acceptable test pass rates and quality acceptance rates. Use manual hand tools for assembly and repetitive operation Checks stock bins for adequate supplies of subassemblies, parts, and fasteners for the particular run. Checks for designated carton pack. Contacts material handler if shortages exists or incorrect parts are in bin. From experience, resolves assembly and packing problems. Reports other problems to the Production Manager for assistance. Involved with productivity and quality improvement efforts...

GENERAL DESCRIPTION: Will perform UH-60 L/M aircraft maintenance as assigned. Must demonstrate comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair, and the ability to determine functionality of non-complex electrical systems. DUTIES: Maintains, repairs and modifies aircraft structures, structural components, and engines of complex to extreme difficulty. Maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components. Use technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. Solve complex problems by interpreting technical data such as blueprints or manufactures' manuals. Utilize...

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Plan, construct and repair specialized containers and material handling items using wood, wood substitute materials or materials required by technical data. Perform standard and specialized preservation and/or packing using various techniques to ensure safe and damage free movement of various aircraft components. Aircraft components include large and unbalanced equipment, sensitive electronics, delicate instruments, industrial components, radar antennas, turbines engines and hazardous materials. Prepare, and process required documentation, special handing labels, shipping codes, and required safety data. Plan, construct and repair containers using Special Packaging...

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Remove, inspect, clean and install components and parts Repair, adjust, and install components and parts and to prepare serviceable aircraft parts for return into the SBSS supply system. Hoist aircraft and install shoring under airframes and/or components on multiple MDS's for short-and long-term storage requirements. Prepare aircraft for final demilitarization by identifying and removing known or suspected hazardous materials to include asbestos, various fluids, and sealed/unsealed radioactive components. Remove major components of aircraft structure or systems such as control surfaces, fairing, access panels, doors, hatches, landing gear assemblies, engines,...

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Tow aircraft and perform all towing duties for various types of aircraft ranging from large bombers and cargo transport to small fighters and single engine aircraft. Perform the full range of towing duties to include serving as tow supervisor, brake rider, wing/tail walker, and chock walker. Operate specialized towing vehicles on prepared and unprepared surfaces including the MB-2, MB-4, U-30, and Bobtail. Service aircraft, tires, struts, and accumulators, use powered and non-powered aerospace ground equipment (AGE), remove and install aircraft panels, wheel and tire assemblies, and aircraft protective devices. Open and close aircraft doors, canopies and...