14 contracts analyst jobs found

GENERAL DESCRIPTION: The Project Finance Analyst (PFA) IV will ensure projects are accounted for in compliance with GAAP, government regulations, Earned Value Management (EVM), and company accounting/finance policies. The PFA IV will be the subject matter expert on all financial matters as it relates to projects' finances. The PFA will have significant interface with Accounting, Project Managers, Contract Management staff, Senior Technical Personnel, as well as other functional areas. . DUTIES: Ensure projects' revenue recognition method is compliant with GAAP and company policies Analyze project revenue, cost, profit, billings, accounts receivable balances, unbilled accounts receivable, indirect rates charged to projects, PO project commitments, cost charging to ensure actuals are consistent with expectations Analyze actuals versus budgets to identify variances and recommend corrective actions to ensure performance meets expectations Advise program...

** THIS POSITION IS CONTINGENT UPON AWARD**   GENERAL DESCRIPTION: Tyonek Services Group (Tyonek) is an 8(a) Native American Corporation formed under the Alaska Native Claims Settlement Act of 1971 (ANCSA). We are seeking a Program Manager (PgM) who will serve as the primary interface between the company and government program authorities. You will oversee the execution of contract requirements of the Marine Corps Prepositioning Programs and have significant responsibility for managing program resources. This position requires extensive knowledge and experience with Depot Level Modification line, and O-Level, and I-Level maintenance support on H-1 Helicopters. This position is responsible for ensuring the required deliverables are met within the specified constraints of time and cost and to achieve the potential benefits defined in the Statement of Work. The PgM is the Tyonek representative to the US Government customer. The PgM will have the overall...

GENERAL DESCRIPTION This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8. F-35 and V-22. Military aviation platform experience is a plus. DUTIES Perform a full range of aircraft sheet metal duties including, but not limited to, disassemble, modify, repair, and reassemble complex aircraft metal items and systems, e.g., bulkheads, airframes, spars, air scoops, wings, flaps, pylons, sponsons, fuselages, skins, ribs, gussets and fuel tanks. These items and systems have combined straight and curved edges and irregular curves and planes. Analyze and evaluate structural damage to metal systems and items; develop patterns using a combination of parallel and radial line development; fabricate, install, and repair a variety of items and systems made from a wide variety of metals, e.g., stainless steel, copper sheet, magnesium, honeycomb,...

General Description Interacts with other engineering groups and customers to define, document, quote, analyze, perform, and interpret test for products, systems, components, or modifications. Develop test strategies and hardware to support production and depot level processes. Duties Reviews customer requirements and specifications and develops compliant testing Develops cost estimates for the test requirements associated with proposals Develops test plans, procedures and programs in support of customer testing Designs and develops test equipment as necessary to support test requirements Relies on extensive experience and judgment to plan and accomplish goals Documents and analyzes test cases and provides feedback and recommendations for product or design changes (DFT) Familiar with open source software and various test development software solutions Ensures testing procedures are in compliance with any required industry specific...

GENERAL DESCRIPTION Work a full range of aircraft sheet metal duties including, but not limited to, disassemble, modify, repair and reassemble complex aircraft metal items & systems, including bulkheads, airframes, spars, air scoops, flaps, wings, pylons, sponsons, fuselages, skins, ribs, gussets and internal and external fuel tanks. DUTIES Candidate must be intimately familiar with all associate pneumatic and power riveting tools and sheet metal tools Analyze and evaluate structural damage to metal system and items Develop patterns using a combination of parallel and radial line development Fabricate, install, and repair a variety of items and systems made from a wide variety of metals, e.g., stainless steel, copper sheet, magnesium, honeycomb, alloys, aluminum etc. Replace sections and patch old systems Cut, bend, shape, and form metals for items that have numerous irregular angles, planes and curves with varying pitch and...

General Description  The Computer Engineer will develop advanced FPGA solutions that power both current and next‑generation defense systems. This role involves full‑lifecycle FPGA development, from requirements and architecture through design, verification, and implementation. The engineer will collaborate closely with software, hardware, and systems engineering teams to deliver optimized, reliable, and mission‑critical FPGA architectures tailored for performance, device utilization, power efficiency, and thermal requirements. U.S. citizenship is required. This position is located at a facility requiring special access, and the selected candidate must be able to obtain and maintain a Secret clearance. Duties Develop complex FPGA designs, including specification, architecture, implementation, and verification. Work with high‑speed I/O designs and communication protocols (PCIe, I2C, SPI, etc.). Manage and coordinate engineering efforts across multiple...

General Description This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to F/A-18 A-G and F-35. Military aviation platform experience is a plus. This position will require a government issued clearance. Duties Perform a full range of aircraft sheet metal duties including, but not limited to, disassemble, modify, repair, and reassemble complex aircraft metal items and systems, e.g., bulkheads, airframes, spars, air scoops, wings, flaps, pylons, sponsons, fuselages, skins, ribs, gussets and fuel tanks. These items and systems have combined straight and curved edges and irregular curves and planes Analyze and evaluate structural damage to metal systems and items; develop patterns using a combination of parallel and radial line development; fabricate, install, and repair a variety of items and systems made from a wide variety of metals, e.g., stainless steel, copper sheet, magnesium, honeycomb,...

         ***********This position is contingent on contract award.************** General Description The LUH72, EC-145, BK-117 Aircraft Technical Inspector is responsible for ensuring that assigned aircraft are maintained within required specifications and are airworthy before operation. Inspects repairs and modification of aircraft structures, structural components and engines of complex to extreme difficulty. Duties Plans, conducts, and supervises aircraft technical inspections. Develops and implements quality control and ground safety programs to ensure compliance with contract specifications. Evaluates personnel, including verification of skills, training and experience. Performs audits and inspections of work centers and ongoing maintenance actions, procedures, equipment and facilities. Examines parts and components for conformance to design specification to determine serviceability; serviceable, unserviceable-reparable, unserviceable-non...

G ENERAL DESCRIPTION Responsible for leading 50+ employees in the production and testing of a variety of complex cable assemblies. The production of what may seem like an unimportant cannon plug connector is the link between aircraft or ground vehicle systems that propels us forward to bigger and better accomplishments. As a production supervisor, you will be leading the electrical manufacturing efforts working with talented and dedicated individuals tasked with promoting positivity and making a difference each day. Must be ready to play an active role on the floor working with the assemblers, technicians, floor leads, and engineering while supporting manufacturing schedules, quality expectations, and budget. DUTIES Provide effective leadership and direction to all assigned employees. Manage employee performance, discipline, development, and recourse planning. Understand each employee's knowledge, skills and abilities in order to leverage...

GENERAL DESCRIPTION Work a full range of aircraft sheet metal duties including, but not limited to, disassemble, modify, repair and reassemble complex aircraft metal items & systems, including bulkheads, airframes, spars, air scoops, flaps, wings, pylons, sponsons, fuselages, skins, ribs, gussets and internal and external fuel tanks. DUTIES Candidate must be intimately familiar with all associate pneumatic and power riveting tools and sheet metal tools Analyze and evaluate structural damage to metal system and items Develop patterns using a combination of parallel and radial line development Fabricate, install, and repair a variety of items and systems made from a wide variety of metals, e.g., stainless steel, copper sheet, magnesium, honeycomb, alloys, aluminum etc. Replace sections and patch old systems Cut, bend, shape, and form metals for items that have numerous irregular angles, planes and curves with varying pitch and...

General Description This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to F/A-18 A-G and F-35. Military aviation platform experience is a plus. This position will require a government issued clearance. Duties Perform a full range of aircraft sheet metal duties including, but not limited to, disassemble, modify, repair, and reassemble complex aircraft metal items and systems, e.g., bulkheads, airframes, spars, air scoops, wings, flaps, pylons, sponsons, fuselages, skins, ribs, gussets and fuel tanks. These items and systems have combined straight and curved edges and irregular curves and planes Analyze and evaluate structural damage to metal systems and items; develop patterns using a combination of parallel and radial line development; fabricate, install, and repair a variety of items and systems made from a wide variety of metals, e.g., stainless steel, copper sheet, magnesium, honeycomb, alloys,...

General Description This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to F/A-18 A-G and F-35. Military aviation platform experience is a plus. This position will require a government issued clearance. Duties Perform a full range of aircraft sheet metal duties including, but not limited to, disassemble, modify, repair, and reassemble complex aircraft metal items and systems, e.g., bulkheads, airframes, spars, air scoops, wings, flaps, pylons, sponsons, fuselages, skins, ribs, gussets and fuel tanks. These items and systems have combined straight and curved edges and irregular curves and planes Analyze and evaluate structural damage to metal systems and items; develop patterns using a combination of parallel and radial line development; fabricate, install, and repair a variety of items and systems made from a wide variety of metals, e.g., stainless steel, copper sheet, magnesium, honeycomb,...

GENERAL DECRIPTION Prepare documentation for the development of cost proposals. Prepare cost proposals utilizing existing pricing models. DUTIES Provide support to Pricing Team to enable proposals are completed and submitted in accordance with customer requirements and schedules. Work with Subject Matter Experts in the analysis of labor and material Basis of Estimates (BOEs). Develop and maintain pricing files in accordance with USG and company requirements. Assist in creating cost proposal documentation and back up. Create complete small and large scale, multi-year, cost proposals to include labor, materials, travel, subcontract costs, and other direct costs from existing pricing models according to the customers' RFP/RFQ schedule. Prepare files for management review of cost proposals. Work in a team hybrid environment. Provide routine administrative support. Other Duties as assigned. EDUCATION/EXPERIENCE REQUIREMENTS...

GENERAL DESCRIPTION Work a full range of aircraft sheet metal duties including, but not limited to, disassemble, modify, repair and reassemble complex aircraft metal items & systems, including bulkheads, airframes, spars, air scoops, flaps, wings, pylons, sponsons, fuselages, skins, ribs, gussets and internal and external fuel tanks. DUTIES Candidate must be intimately familiar with all associate pneumatic and power riveting tools and sheet metal tools Analyze and evaluate structural damage to metal system and items Develop patterns using a combination of parallel and radial line development Fabricate, install, and repair a variety of items and systems made from a wide variety of metals, e.g., stainless steel, copper sheet, magnesium, honeycomb, alloys, aluminum etc. Replace sections and patch old systems Cut, bend, shape, and form metals for items that have numerous irregular angles, planes and curves with varying pitch and circumference...