13 mechanical engineer jobs found

GENERAL DESCRIPTION  Will augment Prime Contractor as an aircraft maintenance resource at US Army sites to ensure aircraft maintenance tasks are performed as required for the LUH-72 aircraft. This position is critical to the operational readiness of the aircraft and is vital to ensure aircraft are available for daily missions. Must demonstrate comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair, and the ability to determine functionality of non-complex electrical systems. DUTIES Maintains, repairs and modifies aircraft structures, structural components, and engines of complex to extreme difficulty. Maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components. Use technical knowledge of airframe and power plant...

         ***********This position is contingent on contract award.************** General Description The LUH72, EC-145, BK-117 Aircraft Technical Inspector is responsible for ensuring that assigned aircraft are maintained within required specifications and are airworthy before operation. Inspects repairs and modification of aircraft structures, structural components and engines of complex to extreme difficulty. Duties Plans, conducts, and supervises aircraft technical inspections. Develops and implements quality control and ground safety programs to ensure compliance with contract specifications. Evaluates personnel, including verification of skills, training and experience. Performs audits and inspections of work centers and ongoing maintenance actions, procedures, equipment and facilities. Examines parts and components for conformance to design specification to determine serviceability; serviceable, unserviceable-reparable, unserviceable-non...

GENERAL DESCRIPTION This is job is at a Depot Level repair facility. Military aviation platform experience in the F/A-18, P-8, F-5, T-6,T-44,H-60 is a plus. EA-6B and/or T-44 experience is a must. DUTIES Maintains repairs and modifies aircraft structures and structural components of moderate difficulty Maintains and repairs aircraft components including, but not limited to, flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components Applies technical knowledge of airframe and power plant systems in determining equipment malfunctions Applies required expertise in restoring equipment condition and or operation Applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as blueprints or manufactures' manuals Make necessary entries into aircraft logs and records Disassembly, repair and assembly of aircraft structural components, such as wings and...

GENERAL DESCRIPTION: The Electronics Engineer Technician is responsible for the design, development and testing of electrical and electronic equipment, components, and systems. DUTIES: Must be a technical expert in Test Program Sets (TPS), built-in-test equipment (BIT/BITE) being able to perform analyses, development, evaluation, updates, prototyping, fielding, and specialized maintenance support in all phases of system life cycle. Must be able to work independently while providing remote and on-site troubleshooting and system repair highly technical and specialized maintenance on the Army's legacy Base Shop Test Facility and associated TPS, various Automated Test Equipment, Line Replaceable Units, and Shop Replaceable Units with limited supervision. Must be able to provide operator training for all customers on Army Automated Test Equipment and associated TPSs. Constructing components, subunits, or simple models per approved Government technical data...

GENERAL DESCRIPTION: The Electronics Engineer Technician is responsible for the design, development and testing of electrical and electronic equipment, components, and systems. DUTIES: Must be a technical expert in Test Program Sets (TPS), built-in-test equipment (BIT/BITE) being able to perform analyses, development, evaluation, updates, prototyping, fielding, and specialized maintenance support in all phases of system life cycle. Must be able to work independently while providing remote and on-site troubleshooting and system repair highly technical and specialized maintenance on the Army's legacy Base Shop Test Facility and associated TPS, various Automated Test Equipment, Line Replaceable Units, and Shop Replaceable Units with limited supervision. Must be able to provide operator training for all customers on Army Automated Test Equipment and associated TPSs. Constructing components, subunits, or simple models per approved Government technical data...

GENERAL DESCRIPTION This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8, T-34, F-35 and V-22. Military Intermediate level experience is a plus DUTIES Reviews blueprints, schematics, and safety procedures while complying with engineering specifications and maintenance instructions utilizing NDMS CONOPS systems. Disassemble, repair, rework and complete overhaul of various components such as Tire/Wheel assemblies, Brake systems, landing gear, shock absorbers, arresting gear to include tail hooks and launch bars. Repair engine mounts, wing support structures and various aircraft mechanisms. Rig, adjust, and calibrate aircraft slings and other support equipment for all aircraft platforms. Assist Engineers with component discrepancies and investigations. Performs final testing and certification of assemblies using...

GENERAL DESCRIPTION Supervise and coordinate the activities of Quality Assurance and Maintenance Department Safety. Directly supervise Quality Inspectors and Supply Technicians-IMRL. Supervise and perform I-level quality assurance inspections on assigned aircraft/aeronautical equipment/SE. Inspect, test, sort, sample, or weigh nonagricultural raw materials or processed, machined, fabricated, or assembled parts or products for defects, wear, and deviations from specifications. May use precision measuring instruments and complex test equipment. DUTIES Works from blue-prints, maintenance manuals, quality control procedures, quality instructions, Contractor standard specifications, naval inspection manual/cards and military technical directives. Inspects mechanical, electrical and electronic systems assemblies and engines using general and special test equipment. Monitors all required inspections of maintenance procedures and system checkouts....

GENERAL DESCRIPTION This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8, T-34, F-35 and V-22. Military Intermediate level experience is a plus DUTIES Reviews blueprints, schematics, and safety procedures while complying with engineering specifications and maintenance instructions utilizing NDMS CONOPS systems. Disassemble, repair, rework and complete overhaul of various components such as Tire/Wheel assemblies, Brake systems, landing gear, shock absorbers, arresting gear to include tail hooks and launch bars. Repair engine mounts, wing support structures and various aircraft mechanisms. Rig, adjust, and calibrate aircraft slings and other support equipment for all aircraft platforms. Assist Engineers with component discrepancies and investigations. Performs final testing and certification of assemblies using...

GENERAL DESCRIPTION This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8, T-34, F-35 and V-22. Military Intermediate level experience is a plus DUTIES Reviews blueprints, schematics, and safety procedures while complying with engineering specifications and maintenance instructions utilizing NDMS CONOPS systems. Disassemble, repair, rework and complete overhaul of various components such as Tire/Wheel assemblies, Brake systems, landing gear, shock absorbers, arresting gear to include tail hooks and launch bars. Repair engine mounts, wing support structures and various aircraft mechanisms. Rig, adjust, and calibrate aircraft slings and other support equipment for all aircraft platforms. Assist Engineers with component discrepancies and investigations. Performs final testing and certification of assemblies using...

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Provide support for performing aircraft/engine/special asset reseals as required IAW T.O. 1-1-686 and Sealing Diagrams for all assigned aircraft to be prepared for storage. Preserve aircraft, aircraft engines, and associated equipment, perform special reseals after parts removal from aircraft and for Process-In/Re-preservation by applying preservative sealant using specialized equipment. All work shall be accomplished IAW technical data/manuals, production work orders, and approved process orders. Other duties as assigned EDUCATION/EXPERIENCE REQUIREMENTS: Must have a high school diploma or equivalent Must have at least 3-5 years of applicable experience...

General Description This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8. F-35 and V-22. Military aviation platform experience is a plus. Duties With oversight, assist in disassembly, repair, rework and installation of various systems and components such as wings, control surfaces, control systems, landing gear, arresting gear, fuel cells, instrumentation, and engines. Assist with installing hydraulic tubing, actuating cylinders, and cable controls. Assist in rigging, adjustment and tests on various flight systems including landing gear, flight controls, instruments, oxygen/ environmental systems and power plants. Assist in the installation of fuel system components to include self-sealing fuel cells and assist with the preservation or depreservation of aircraft or aircraft components. Take hydraulic or fuel...

**THIS POSITION IS CONTINGENT UPON CONTRACT AWARD** GENERAL DESCRIPTION: Tyonek Services Group will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Interpret written instructions, technical data, engineering drawings, and specifications to plan and lay out machining operations required for the fabrication, restoration, and modification of landing-gear components. Use Machinist hand tools, precision measuring instruments, and standard machine tools, including lathes, mills, grinders, Computer Numerical Control (CNC), and related equipment-to produce metal parts to the close tolerances required for aircraft landing-gear systems. Perform machining computations involving dimensions, tolerances, feeds, speeds, and tooling requirements; apply...

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Plan, construct and repair specialized containers and material handling items using wood, wood substitute materials or materials required by technical data. Perform standard and specialized preservation and/or packing using various techniques to ensure safe and damage free movement of various aircraft components. Aircraft components include large and unbalanced equipment, sensitive electronics, delicate instruments, industrial components, radar antennas, turbines engines and hazardous materials. Prepare, and process required documentation, special handing labels, shipping codes, and required safety data. Plan, construct and repair containers using Special...