18 jobs found

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Remove, inspect, clean and install components and parts Repair, adjust, and install components and parts and to prepare serviceable aircraft parts for return into the SBSS supply system. Hoist aircraft and install shoring under airframes and/or components on multiple MDS's for short-and long-term storage requirements. Prepare aircraft for final demilitarization by identifying and removing known or suspected hazardous materials to include asbestos, various fluids, and sealed/unsealed radioactive components. Remove major components of aircraft structure or systems such as control surfaces, fairing, access panels, doors, hatches, landing gear assemblies, engines,...

GENERAL DESCRIPTION This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8, T-34, F-35 and V-22. Military Intermediate level experience is a plus DUTIES Reviews blueprints, schematics, and safety procedures while complying with engineering specifications and maintenance instructions utilizing NDMS CONOPS systems. Disassemble, repair, rework and complete overhaul of various components such as Tire/Wheel assemblies, Brake systems, landing gear, shock absorbers, arresting gear to include tail hooks and launch bars. Repair engine mounts, wing support structures and various aircraft mechanisms. Rig, adjust, and calibrate aircraft slings and other support equipment for all aircraft platforms. Assist Engineers with component discrepancies and investigations. Performs final testing and certification of assemblies using...

GENERAL DESCRIPTION: Will perform UH-60 L/M aircraft maintenance as assigned. Must demonstrate comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair, and the ability to determine functionality of non-complex electrical systems. DUTIES: Maintains, repairs and modifies aircraft structures, structural components, and engines of complex to extreme difficulty. Maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components. Use technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. Solve complex problems by interpreting technical data such as blueprints or manufactures' manuals. Utilize...

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Receive, store, select, move and ship general or specialized bulk and bin materials and equipment. · Create, construct, and repair containers from wood or wood substitute materials; pack, preserve, and crate items for shipment and/or storage; and brace and block items for shipment. · Plan and lay-out construction details and material requirements based on similar previously manufactured containers. · In-process, store, and issue a variety of aircraft components and DoD special tooling equipment. Operate Materials Handling Equipment (MHE) which includes forklifts and warehouse tugs. The forklifts will be both diesel and electric powered with lift capacities up to and...

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Remove, inspect, clean and install components and parts Repair, adjust, and install components and parts and to prepare serviceable aircraft parts for return into the SBSS supply system. Hoist aircraft and install shoring under airframes and/or components on multiple MDS's for short-and long-term storage requirements. Prepare aircraft for final demilitarization by identifying and removing known or suspected hazardous materials to include asbestos, various fluids, and sealed/unsealed radioactive components. Remove major components of aircraft structure or systems such as control surfaces, fairing, access panels, doors, hatches, landing gear assemblies, engines,...

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Tow aircraft and perform all towing duties for various types of aircraft ranging from large bombers and cargo transport to small fighters and single engine aircraft. Perform the full range of towing duties to include serving as tow supervisor, brake rider, wing/tail walker, and chock walker. Operate specialized towing vehicles on prepared and unprepared surfaces including the MB-2, MB-4, U-30, and Bobtail. Service aircraft, tires, struts, and accumulators, use powered and non-powered aerospace ground equipment (AGE), remove and install aircraft panels, wheel and tire assemblies, and aircraft protective devices. Open and close aircraft doors, canopies and...

General Description This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8. F-35 and V-22. Military aviation platform experience is a plus. Duties With oversight, assist in disassembly, repair, rework and installation of various systems and components such as wings, control surfaces, control systems, landing gear, arresting gear, fuel cells, instrumentation, and engines. Assist with installing hydraulic tubing, actuating cylinders, and cable controls. Assist in rigging, adjustment and tests on various flight systems including landing gear, flight controls, instruments, oxygen/ environmental systems and power plants. Assist in the installation of fuel system components to include self-sealing fuel cells and assist with the preservation or depreservation of aircraft or aircraft components. Take hydraulic or fuel...

GENERAL DESCRIPTION Aircraft Mechanic Electricians troubleshoot, repair, overhaul, modify, test, and calibrate, instruments of multiple component design. The items serviced at this level are interdependent electrical, mechanical, pneumatic, hydraulic, and/or electronic units and devices that detect, measure, record, indicate or regulate velocity, pressure, displacement, weight, temperature, airspeed, torque, resistance, voltage, and similar values and relationships. This job is at a Depot Level repair facility performing maintenance on aircraft equipment, which include, but not limited to, F/A-18, E-2/C-2, H-1, F-35 AND V-22. Military aviation experience is a plus. DUTIES Performs a variety of electrical trade functions such as testing, troubleshooting, overhauling and/or repairing of items such as generators, actuators, van-axial fans, transformer-rectifiers, supervisory controls, relaying systems, and related controls containing printed and miniaturized...

**THIS POSITION IS CONTINGENT UPON CONTRACT AWARD** GENERAL DESCRIPTION: Tyonek Services Group will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Conduct chemical stripping of paints and primers. Perform abrasive blasting on ferrous and non-ferrous materials. Prepare surfaces through sanding, grinding, mechanical abrasion, and acid etching. Apply primers, topcoats, epoxy coatings, lacquer, resin, Radar Absorbent Material (RAM), Low Observable (LO) coatings, and other authorized materials using approved application methods. Mask and protect sensitive aircraft areas. Apply markings and stenciled insignia. Inspect aircraft and components for dents, corrosion, and other surface defects. Operate required tools and equipment,...

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Provide support for performing aircraft/engine/special asset reseals as required IAW T.O. 1-1-686 and Sealing Diagrams for all assigned aircraft to be prepared for storage. Preserve aircraft, aircraft engines, and associated equipment, perform special reseals after parts removal from aircraft and for Process-In/Re-preservation by applying preservative sealant using specialized equipment. All work shall be accomplished IAW technical data/manuals, production work orders, and approved process orders. Other duties as assigned EDUCATION/EXPERIENCE REQUIREMENTS: Must have a high school diploma or equivalent Must have at least 3-5 years of applicable...

**THIS POSITION IS TEMPORARY** GENERAL DESCRIPTION: Will perform UH-60 L/M aircraft maintenance as assigned. Must demonstrate comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair, and the ability to determine functionality of non-complex electrical systems. DUTIES: Maintains, repairs and modifies aircraft structures, structural components, and engines of complex to extreme difficulty. Maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components. Use technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. Solve complex problems by interpreting technical data such as blueprints or...

General Description Interacts with other engineering groups and customers to define, document, quote, analyze, perform, and interpret test for products, systems, components, or modifications. Develop test strategies and hardware to support production and depot level processes. Duties Reviews customer requirements and specifications and develops compliant testing Develops cost estimates for the test requirements associated with proposals Develops test plans, procedures and programs in support of customer testing Designs and develops test equipment as necessary to support test requirements Relies on extensive experience and judgment to plan and accomplish goals Documents and analyzes test cases and provides feedback and recommendations for product or design changes (DFT) Familiar with open source software and various test development software solutions Ensures testing procedures are in compliance with any required industry specific...

**THIS POSITION IS CONTINGENT UPON CONTRACT AWARD** GENERAL DESCRIPTION: Tyonek Services Group will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Interpret written instructions, technical data, engineering drawings, and specifications to plan and lay out machining operations required for the fabrication, restoration, and modification of landing-gear components. Use Machinist hand tools, precision measuring instruments, and standard machine tools, including lathes, mills, grinders, Computer Numerical Control (CNC), and related equipment-to produce metal parts to the close tolerances required for aircraft landing-gear systems. Perform machining computations involving dimensions, tolerances, feeds, speeds, and tooling requirements; apply...

         ***********This position is contingent on contract award.************** General Description The LUH72, EC-145, BK-117 Aircraft Technical Inspector is responsible for ensuring that assigned aircraft are maintained within required specifications and are airworthy before operation. Inspects repairs and modification of aircraft structures, structural components and engines of complex to extreme difficulty. Duties Plans, conducts, and supervises aircraft technical inspections. Develops and implements quality control and ground safety programs to ensure compliance with contract specifications. Evaluates personnel, including verification of skills, training and experience. Performs audits and inspections of work centers and ongoing maintenance actions, procedures, equipment and facilities. Examines parts and components for conformance to design specification to determine serviceability; serviceable, unserviceable-reparable, unserviceable-non...

GENERAL DESCRIPTION Must be able to remove, repair, modify, test, troubleshoot, calibrate, and install electrical systems, equipment, and accessories used in aircraft. DUTIES Make functional checks on electrical systems to ensure performance and reliability and correct malfunctions disclosed by static, ground, and flight tests Replace defective wiring and install new wiring for aircraft changes, modifications and repairs Perform work using overhaul and maintenance manuals, aircraft changes, bulletins, local directives, blueprints, and wiring and/or schematic diagrams Must be able to overhaul, repair, modify and test aircraft electrical system accessories such as motors, dynamotors, /inverters, voltage regulators, relays, cutouts, engine synchronizers, electric motor driven air compressors and activators, DC generators, AC alternators, and DC/AC electrical controls, cockpit air conditioning controls, engine temperature controls, and transistorized...

GENERAL DESCRIPTION Coats surfaces of military aircraft and components with paint, lacquer, epoxy, resin or other material, using Aerospace/aviation application techniques with spray guns, paint guns and other application devices DUTIES Removes old paint from aircraft, using liquid paint remover and scraper; Smooths surface with sandpaper and steel wool; Roughens aluminum surfaces with acid solution and steel wool to ensure that paint adheres to surface; Masks and covers portions of surfaces not to be painted; and Assemble staging, scaffolds and work stands necessary to perform the full function of the paint shop; Prepare aircraft, engines, SE and components for finish using various chemicals, detergents and solvents in conjunction with high pressure steam and water; Apply chemical conversion coating to bare substrate, sand and featheredge existing coatings using various grits of abrasives; Apply protective and decorative coating and...

General Description This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8. F-35 and V-22. Military aviation platform experience is a plus. Duties Set up and operate all types of conventional machines, computer numerically controlled (CNC) machines and related equipment in the manufacture, rework, and repair of aircraft parts and components. Set up and perform machining operations on conventional and CNC machine tools such as grinders, milling machines, lathes, and drills. Read and understand blueprints, drawings, sketches, work documents, aircraft technical documents, manuals, bulletins, and directives; produce assigned work in accordance with established standards Other duties as assigned Education/Experience Requirements High School Diploma or equivalent Minimum 4 years of aircraft machining...