19 Aerospace/Aviation jobs

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Provide direct labor support for aircraft egress systems and possess an advanced level of knowledge, skill and ability in the field. Meet the egress requirements outlined in AFI 21-102, chapter 12 and AFMCI21-100, chapter 12. Receive specialty egress training and certification for at least one of the following aircraft prior to performing on this Task Order: A-10 and F-16. May be required to receive just-in- time (JIT) training from the Government for other aircraft MDS egress system removal and installation as required. Accomplish the following functions on A-10 and F- 16, and other aircraft as required: remove/install canopy, remove/install seat/seat support...

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Provide support for performing aircraft/engine/special asset reseals as required IAW T.O. 1-1-686 and Sealing Diagrams for all assigned aircraft to be prepared for storage. Preserve aircraft, aircraft engines, and associated equipment, perform special reseals after parts removal from aircraft and for Process-In/Re-preservation by applying preservative sealant using specialized equipment. All work shall be accomplished IAW technical data/manuals, production work orders, and approved process orders. Other duties as assigned EDUCATION/EXPERIENCE REQUIREMENTS: Must have a high school diploma or equivalent Must have at least 3-5 years of applicable...

GENERAL DESCRIPTION This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8, T-34, F-35 and V-22. Military Intermediate level experience is a plus DUTIES Reviews blueprints, schematics, and safety procedures while complying with engineering specifications and maintenance instructions utilizing NDMS CONOPS systems. Disassemble, repair, rework and complete overhaul of various components such as Tire/Wheel assemblies, Brake systems, landing gear, shock absorbers, arresting gear to include tail hooks and launch bars. Repair engine mounts, wing support structures and various aircraft mechanisms. Rig, adjust, and calibrate aircraft slings and other support equipment for all aircraft platforms. Assist Engineers with component discrepancies and investigations. Performs final testing and certification of assemblies using...

General Description This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8. F-35 and V-22. Military aviation platform experience is a plus. Duties Perform a full range of aircraft sheet metal duties including, but not limited to, disassemble, modify, repair, and reassemble complex aircraft metal items and systems, e.g., bulkheads, airframes, spars, air scoops, wings, flaps, pylons, sponsons, fuselages, skins, ribs, gussets and fuel tanks. These items and systems have combined straight and curved edges and irregular curves and planes Analyze and evaluate structural damage to metal systems and items; develop patterns using a combination of parallel and radial line development; fabricate, install, and repair a variety of items and systems made from a wide variety of metals, e.g., stainless steel, copper sheet, magnesium, honeycomb,...

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Perform chemical stripping of paints and primers to facilitate access for maintenance personnel to conduct depot-level modifications and repairs on a variety of aircraft, including F-16 aircraft, other routed items, and associated components. Perform comprehensive media blasting (utilizing various media), stripping, and cleaning of aircraft and aircraft components; prepare aircraft surfaces for painting; formulate coating materials; apply coatings to aircraft and aircraft components; and conduct corrosion and other relevant inspections. Operate common tools such as paint guns, sanders, plastic scrapers, high-speed grinders, hydro-blasters, various media blast...

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Perform chemical stripping of paints and primers to facilitate access for maintenance personnel to conduct depot-level modifications and repairs on a variety of aircraft, including F-16 aircraft, other routed items, and associated components. Perform comprehensive media blasting (utilizing various media), stripping, and cleaning of aircraft and aircraft components; prepare aircraft surfaces for painting; formulate coating materials; apply coatings to aircraft and aircraft components; and conduct corrosion and other relevant inspections. Operate common tools such as paint guns, sanders, plastic scrapers, high-speed grinders, hydro-blasters, various media blast equipment,...

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Provide direct labor support for aircraft egress systems and possess an advanced level of knowledge, skill and ability in the field. Meet the egress requirements outlined in AFI 21-102, chapter 12 and AFMCI21-100, chapter 12. Receive specialty egress training and certification for at least one of the following aircraft prior to performing on this Task Order: A-10 and F-16. May be required to receive just-in- time (JIT) training from the Government for other aircraft MDS egress system removal and installation as required. Accomplish the following functions on A-10 and F- 16, and other aircraft as required: remove/install canopy, remove/install seat/seat support...

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Provide support for performing aircraft/engine/special asset reseals as required IAW T.O. 1-1-686 and Sealing Diagrams for all assigned aircraft to be prepared for storage. Preserve aircraft, aircraft engines, and associated equipment, perform special reseals after parts removal from aircraft and for Process-In/Re-preservation by applying preservative sealant using specialized equipment. All work shall be accomplished IAW technical data/manuals, production work orders, and approved process orders. Other duties as assigned EDUCATION/EXPERIENCE REQUIREMENTS: Must have a high school diploma or equivalent Must have at least 3-5 years of applicable...

General Description This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8. F-35 and V-22. Military aviation platform experience is a plus. Duties Set up and operate all types of conventional machines, computer numerically controlled (CNC) machines and related equipment in the manufacture, rework, and repair of aircraft parts and components. Set up and perform machining operations on conventional and CNC machine tools such as grinders, milling machines, lathes, and drills. Read and understand blueprints, drawings, sketches, work documents, aircraft technical documents, manuals, bulletins, and directives; produce assigned work in accordance with established standards Other duties as assigned Education/Experience Requirements High School Diploma or equivalent Minimum 4 years of aircraft machining...

GENERAL DESCRIPTION: Will perform Field and Sustainment Level maintenance support/augmentation to include: Production control, Quality Control, Supply Management, maintenance, and repair of aircraft, as well as launch and recovery of aircraft prior to and after the conduct of flight activities. Shall work in specialized shops associated with fixed base operations Field Level maintenance as well as perform troubleshooting and maintenance repairs on the flight line in Hopkins, SC. DUTIES: Implements quality control and ground safety programs to ensure compliance with contract specifications. Inspects and verifies proper completion of documentation of Safety of Flight discrepancies. Briefs and debriefs pilots and crew members assigned to perform functional check flights. Performs audits and inspections of work center and maintenance actions, procedures, equipment, and facilities. Examines parts and components for conformance to design...

General Description This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to F/A-18 A-G and F-35. Military aviation platform experience is a plus. This position will require a government issued clearance. Duties Perform a full range of aircraft sheet metal duties including, but not limited to, disassemble, modify, repair, and reassemble complex aircraft metal items and systems, e.g., bulkheads, airframes, spars, air scoops, wings, flaps, pylons, sponsons, fuselages, skins, ribs, gussets and fuel tanks. These items and systems have combined straight and curved edges and irregular curves and planes Analyze and evaluate structural damage to metal systems and items; develop patterns using a combination of parallel and radial line development; fabricate, install, and repair a variety of items and systems made from a wide variety of metals, e.g., stainless steel, copper sheet, magnesium, honeycomb, alloys,...

GENERAL DESCRIPTION Will perform DEPOT level aircraft maintenance as assigned on multiple variants of military engine platforms. Must demonstrate knowledge of military technical manuals and able to qualify for government equipment operators license as required DUTIES Disassemble multiple type aircraft engines, engine assemblies and accessories and remove tubing, fuel controls, pumps, etc. as required; Break down major assemblies in proper sequence and inspect for visual defects; Determine if parts are functional and reusable; Examine, evaluate, recondition and assemble subassemblies; Maintain, repair, and/or test different types of engines in aircraft test cells or maintenance shops; Be able to analyze problems such as fuel fluctuation, compressor instability or excessive vibration and take remedial action, disassembling to the extent necessary to make needed corrections; Have knowledge of preservation and de-preservation techniques used...

GENERAL DESCRIPTION Candidate will perform in-process, receiving, and final inspection of aerospace hardware utilizing basic inspection equipment and customer provided drawings and/or specifications. Duties Read and interpret drawings, specifications, and standards to determine product status. Use standard measuring tools such as micrometers, calipers, and height gauges. Operate a coordinate measuring machining (CMM). Select the correct tool needed to do the job, regularly make decisions on tooling requirement for specific tasks. Assist and train Mechanical Inspector I. Complete non-conformance reports as required. Complete AS9102 FAI reports. Has good communication skills and communicates effectively with coworkers. Other Duties as assigned. Education/Experience Requirements High school diploma or equivalent is required. Trade school is desirable. 4 to 7 years mechanical inspection, mechanical assembly, and/or...

GENERAL DESCRIPTION Will perform UH-60A/L/M aircraft maintenance as assigned. Must demonstrate comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems. DUTIES Maintains, repairs and modifies aircraft structures, structural components and engines of complex to extreme difficulty. Maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components. Use technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. Solve complex problems by interpreting technical data such as blueprints or manufactures' manuals. Utilize aircraft...

GENERAL DESCRIPTION This is job is at a Depot Level repair facility maintenance on H-60 aircraft. Military aviation platform experience is a plus. This position will require a government issued clearance. DUTIES Perform a full range of aircraft sheet metal duties including, but not limited to, disassemble, modify, repair, and reassemble complex aircraft metal items and systems, e.g., bulkheads, airframes, spars, air scoops, wings, flaps, pylons, sponsons, fuselages, skins, ribs, gussets and fuel tanks. These items and systems have combined straight and curved edges and irregular curves and planes Analyze and evaluate structural damage to metal systems and items; develop patterns using a combination of parallel and radial line development; fabricate, install, and repair a variety of items and systems made from a wide variety of metals, e.g., stainless steel, copper sheet, magnesium, honeycomb, alloys, aluminum; replace sections and patch old systems; cut,...

GENERAL DESCRIPTION Will perform Field and Sustainment Level maintenance support/augmentation to include: Production control, Quality Control, Supply Management, maintenance, and repair of aircraft, as well as launch and recovery of aircraft prior to and after the conduct of flight activities. Shall work in specialized shops associated with fixed base operations Field Level maintenance as well as perform troubleshooting and maintenance repairs on the flight line at the KYARNG RAPSC facility. DUTIES Responsible for performing preliminary, hidden damage, in process, FOD, and final inspections of work performed within the MRO Operations. Provides technical assistance, interprets technical data, and evaluates maintenance actions to ensure safe and reliable aircraft, components, and equipment is provided in accordance with current technical publications and directives. Complies with all regulatory/statutory, customer and contractual requirements....

GENERAL DESCRIPTION: This position requires an A&P Mechanic with Inspection Authorization (IA) to perform aircraft inspections, maintenance, and repairs in accordance with OEM manuals, military supplements, and FAA regulations. While the primary aircraft include Beechcraft A200C models (TC-12/C-12 aircraft), this position will also support military and commercial rotary- and fixed-wing aviation maintenance. The A&P Mechanic with IA will be responsible for reviewing aircraft records, including weight and balance calculations, life-limited parts tracking, Required Inspection Items (RII), Airworthiness Directives (ADs), and Service Bulletin (SB) compliance, ensuring continued airworthiness. Additionally, this role serves as the final release authority before aircraft are submitted for Designated Airworthiness Representative (DAR) approval for foreign sales under Foreign Military Sales (FMS) contracts. DUTIES: Perform scheduled and unscheduled...

General Description This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8. F-35 and V-22. Military aviation platform experience is a plus. Duties Perform a full range of aircraft sheet metal duties including, but not limited to, disassemble, modify, repair, and reassemble complex aircraft metal items and systems, e.g., bulkheads, airframes, spars, air scoops, wings, flaps, pylons, sponsons, fuselages, skins, ribs, gussets and fuel tanks. These items and systems have combined straight and curved edges and irregular curves and planes Analyze and evaluate structural damage to metal systems and items; develop patterns using a combination of parallel and radial line development; fabricate, install, and repair a variety of items and systems made from a wide variety of metals, e.g., stainless steel, copper sheet, magnesium, honeycomb,...

GENERAL DESCRIPTION This job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8. F-35 and V-22. Military aviation platform experience is a plus. DUTIES At least two years of documented experience in Aerospace and/or Aircraft log and records procedures and processes. Provide verification to the COR of this experience during the first 30 days of performance and/or upon hiring. Review all incoming Ready for Issue (RFI) engine logbooks and included documentation for accuracy and completeness and maintain these logs throughout the depot custody of the engine. Review, screen, and transcribe into the logbook from completed work documents, the actual work performed on the engines in accordance with the CNAFINST 4790.2 (series) Screen for accuracy all Scheduled Removal Component (SRC) Cards, Module Service Record (MSR) Cards,...