28 facilities jobs found

GENERAL DESCRIPTION Must be able to remove, repair, modify, test, troubleshoot, calibrate, and install electrical systems, equipment, and accessories used in aircraft. DUTIES Make functional checks on electrical systems to ensure performance and reliability and correct malfunctions disclosed by static, ground, and flight tests Replace defective wiring and install new wiring for aircraft changes, modifications and repairs Perform work using overhaul and maintenance manuals, aircraft changes, bulletins, local directives, blueprints, and wiring and/or schematic diagrams Must be able to overhaul, repair, modify and test aircraft electrical system accessories such as motors, dynamotors, /inverters, voltage regulators, relays, cutouts, engine synchronizers, electric motor driven air compressors and activators, DC generators, AC alternators, and DC/AC electrical controls, cockpit air conditioning controls, engine temperature controls, and transistorized...

GENERAL DESCRIPTION Coats surfaces of military aircraft and components with paint, lacquer, epoxy, resin or other material, using Aerospace/aviation application techniques with spray guns, paint guns and other application devices DUTIES Removes old paint from aircraft, using liquid paint remover and scraper; Smooths surface with sandpaper and steel wool; Roughens aluminum surfaces with acid solution and steel wool to ensure that paint adheres to surface; Masks and covers portions of surfaces not to be painted; and Assemble staging, scaffolds and work stands necessary to perform the full function of the paint shop; Prepare aircraft, engines, SE and components for finish using various chemicals, detergents and solvents in conjunction with high pressure steam and water; Apply chemical conversion coating to bare substrate, sand and featheredge existing coatings using various grits of abrasives; Apply protective and decorative coating and...

                               ***********This position is contingent on contract award.************** General Description The LUH72 Aircraft Technical Inspector is responsible for ensuring that assigned aircraft are maintained within required specifications and are airworthy before operation. Inspects repairs and modification of aircraft structures, structural components and engines of complex to extreme difficulty. Duties Plans, conducts, and supervises aircraft technical inspections. Develops and implements quality control and ground safety programs to ensure compliance with contract specifications. Evaluates personnel, including verification of skills, training and experience. Performs audits and inspections of work centers and ongoing maintenance actions, procedures, equipment and facilities. Examines parts and components for conformance to design specification to determine serviceability; serviceable, unserviceable-reparable,...

GENERAL DESCRIPTION Work a full range of aircraft sheet metal duties including, but not limited to, disassemble, modify, repair and reassemble complex aircraft metal items & systems, including bulkheads, airframes, spars, air scoops, flaps, wings, pylons, sponsons, fuselages, skins, ribs, gussets and internal and external fuel tanks. DUTIES Candidate must be intimately familiar with all associate pneumatic and power riveting tools and sheet metal tools Analyze and evaluate structural damage to metal system and items Develop patterns using a combination of parallel and radial line development Fabricate, install, and repair a variety of items and systems made from a wide variety of metals, e.g., stainless steel, copper sheet, magnesium, honeycomb, alloys, aluminum etc. Replace sections and patch old systems Cut, bend, shape, and form metals for items that have numerous irregular angles, planes and curves with varying pitch and circumference...

GENERAL DESCRIPTION Work a full range of aircraft sheet metal duties including, but not limited to, disassemble, modify, repair and reassemble complex aircraft metal items & systems, including bulkheads, airframes, spars, air scoops, flaps, wings, pylons, sponsons, fuselages, skins, ribs, gussets and internal and external fuel tanks. DUTIES Candidate must be intimately familiar with all associate pneumatic and power riveting tools and sheet metal tools Analyze and evaluate structural damage to metal system and items Develop patterns using a combination of parallel and radial line development Fabricate, install, and repair a variety of items and systems made from a wide variety of metals, e.g., stainless steel, copper sheet, magnesium, honeycomb, alloys, aluminum etc. Replace sections and patch old systems Cut, bend, shape, and form metals for items that have numerous irregular angles, planes and curves with varying pitch and circumference...

GENERAL DESCRIPTION: Will perform Field and Sustainment Level maintenance support/augmentation to include: Production control, Quality Control, Supply Management, maintenance, and repair of aircraft, as well as launch and recovery of aircraft prior to and after the conduct of flight activities. Shall work in specialized shops associated with fixed base operations Field Level maintenance as well as perform troubleshooting and maintenance repairs on the flight line in Hopkins, SC. DUTIES: Implements quality control and ground safety programs to ensure compliance with contract specifications. Inspects and verifies proper completion of documentation of Safety of Flight discrepancies. Briefs and debriefs pilots and crew members assigned to perform functional check flights. Performs audits and inspections of work center and maintenance actions, procedures, equipment, and facilities. Examines parts and components for conformance to design...

GENERAL DESCRIPTION: Will perform field and sustainment level support on AH-64D/E aircraft maintenance as assigned. Must demonstrate comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair, and the ability to determine functionality of non-complex electrical systems. DUTIES: Maintains, repairs and modifies aircraft structures, structural components, and engines of complex to extreme difficulty. Maintains and repairs aircraft components and subcomponents including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components. Use technical knowledge of airframe and power plant systems in determining equipment malfunctions and apply technical expertise in restoring equipment condition and operation. Solve complex problems by interpreting technical data such as...

GENERAL DESCRIPTION Maintain SE logs and records of maintenance, component pool status, recall, and receipts/releases of repaired SE end items in support of the maintenance support requirements. DUTIES The PCC-SE shall have demonstrated knowledge, experience, and working level skills/ability in: Navy/USMC aviation maintenance logs and records. NALCOMIS and associated forms and procedures. Navy/USMC Production control procedures and reports. The PCC-SE shall have a minimum of two (2) years' experience in the last ten (10) years in Navy/USMC aviation maintenance (with emphasis in the area of SE in an aviation maintenance organization) to the level of effort and complexity of requirements in this SOW. This experience shall be exclusive of formalized training time. Examples of acceptable experience: Navy Aviation Maintenance Administration man (AZ) (E-5 through E-7) or USMC equivalent. Graduate from military AZ A and C schools or civilian...

G ENERAL DESCRIPTION Responsible for leading 50+ employees in the production and testing of a variety of complex cable assemblies. The production of what may seem like an unimportant cannon plug connector is the link between aircraft or ground vehicle systems that propels us forward to bigger and better accomplishments. As a production supervisor, you will be leading the electrical manufacturing efforts working with talented and dedicated individuals tasked with promoting positivity and making a difference each day. Must be ready to play an active role on the floor working with the assemblers, technicians, floor leads, and engineering while supporting manufacturing schedules, quality expectations, and budget. DUTIES Provide effective leadership and direction to all assigned employees. Manage employee performance, discipline, development, and recourse planning. Understand each employee's knowledge, skills and abilities in order to leverage...

  ***********This position is contingent on contract award.************** General Description The LUH-72, EC-145, BK-117 Aircraft Mechanic III maintains repairs and modifies aircraft structures, structural components and engines of complex to extreme difficulty. Duties Maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components. Applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. Removes and installs aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components. Services and lubricates aircraft and subsystems. Safely prepares aircraft for inspections and maintenance checks and services. Performs scheduled inspections and assists in performing...

General Description Leads production efforts in the manufacturing of electro-mechanical assemblies as an individual contributor. These assemblies involve various electronic assembly operations to include but not limited to SMT soldering and repairs, through-hole soldering and repairs, optical fiber, fiber cables, hybrid wiring harness assemblies, wire termination, cable harness assembly, cable harness integration into chassis and modules. This an advanced position. Duties Assembles electrical and electronic components, wiring harnesses, and other electrical assemblies and subassemblies. Manufactures electronic/electrical circuitry, electronic components (CCA's), and wiring harnesses according to Manufacturing Orders (M.O.), Drawings, Engineering Changes, Customer Specifications, and Process of Instructions (P.I.). Understand and interpret IPC/J-ST, AS, and MIL specifications as they relate to Defense/Aerospace. Procure the necessary tools, parts, and...

GENERAL DESCRIPTION Manufactures electronic assemblies by performing various operations to include but not limited to SMT soldering and repairs, through-hole soldering and repairs, wire termination, cable harness assembly and cable harness installation and box integration. DUTIES Assembles electrical and electronic components, wiring harnesses, and other electrical assemblies and subassemblies. Manufactures electronic/electrical circuitry, electronic components (CCA's), and wiring harnesses according to Manufacturing Orders (M.O.), Drawings, Engineering Changes, Customer Specifications, and Process of Instructions (P.I.). Must be familiar with and understand IPC/J-STD, AS and MIL specifications as they relate to Defense/Aerospace requirements. Maintains clean and safe working environment in line with company policies. Other Duties as Assigned EDUCATION/EXPERIENCE REQUIREMENTS High school diploma or equivalent 10+ years of...

GENERAL DESCRIPTION Performs electronic assembly operations such as SMT soldering and repairs, through hole soldering and repairs, wire termination, cable harness assembly and cable harness installation into chassis and modules. DUTIES Assembles electrical and electronic components, wiring harnesses, and other electrical assemblies and subassemblies. Manufactures electronic/electrical circuitry, electronic components (CCA's), and wiring harnesses according to Manufacturing Orders (M.O.), Drawings, Engineering Changes, Customer Specifications, and Process Instructions (P.I.). Cable harness build experience both crimp and solder Knowledge of lean manufacturing, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. Must be familiar with and understand IPC/J-STD, AS and MIL specifications as they relate to Defense/Aerospace requirements in CCA's and Harness build. Ability to develop...

GENERAL DESCRIPTION Assemble, test, and rework cables, harnesses, mechanical and electromechanical products. DUTIES Assemble products according to routers, drawings, and all other applicable documentation Operate automatic stripping, crimping, wire cutting, and basic test equipment Maintain a clean and safe working environment Work together cohesively with co-workers to ensure a constructive teaming environment Maintain acceptable test pass rates and quality acceptance rates. Use manual hand tools for assembly and repetitive operation Checks stock bins for adequate supplies of subassemblies, parts, and fasteners for the particular run. Checks for designated carton pack. Contacts material handler if shortages exists or incorrect parts are in bin. From experience, resolves assembly and packing problems. Reports other problems to the Production Manager for assistance. Involved with productivity and quality improvement efforts...

** THIS POSITION IS CONTINGENT UPON AWARD**   GENERAL DESCRIPTION: Tyonek Services Group (Tyonek) is an 8(a) Native American Corporation formed under the Alaska Native Claims Settlement Act of 1971 (ANCSA). We are seeking a Program Manager (PgM) who will serve as the primary interface between the company and government program authorities. You will oversee the execution of contract requirements of the Marine Corps Prepositioning Programs and have significant responsibility for managing program resources. This position requires extensive knowledge and experience with Marine Corps logistical functions, equipment maintenance, supply chain, and Marine Corps Maritime Prepositions Force Operations. This position is responsible for ensuring the required deliverables are met within the specified constraints of time and cost and to achieve the potential benefits defined in the Statement of Work. The PgM is the Tyonek representative to the US Government customer. The PgM...

GENERAL DESCRIPTION: The team will augment services provided by Air Force military personnel to modify, maintain, inspect, control corrosion, overhaul, repair, regenerate and store various weapon systems, related components, missiles, engines, ground support equipment and vehicles. DUTIES: Provide support for performing aircraft/engine/special asset reseals as required IAW T.O. 1-1-686 and Sealing Diagrams for all assigned aircraft to be prepared for storage. Preserve aircraft, aircraft engines, and associated equipment, perform special reseals after parts removal from aircraft and for Process-In/Re-preservation by applying preservative sealant using specialized equipment. All work shall be accomplished IAW technical data/manuals, production work orders, and approved process orders. Other duties as assigned EDUCATION/EXPERIENCE REQUIREMENTS: Must have a high school diploma or equivalent Must have at least 3-5 years of applicable...

General Description The Pricing Supervisor is responsible for preparing compliant and cost competitive price and cost volume responses to requests for proposals and requests for quotes. Develops pricing models and templates. Responsible for overseeing pricing bids prepared by department pricing analysts. Assists with training pricing staff. Hybrid work located in Madison, AL. Duties Work with technical and management subject matter experts to prepare estimates and pricing data in accordance with Federal Acquisition Regulations (FAR) government Requests for Proposals (RFPs) and Requests for Quotes (RFQs). Assist with Process improvement initiatives Develop pricing models Review workload estimates, basis of estimates, and pricing data Conduct analysis to optimize competitive bid pricing Present cost estimates to corporate stakeholders and lead review discussions Assist with price to win analyses and strategy Prepare proposal cost volumes...

General Description This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8. F-35 and V-22. Military aviation platform experience is a plus. Duties Set up and operate all types of conventional machines, computer numerically controlled (CNC) machines and related equipment in the manufacture, rework, and repair of aircraft parts and components. Set up and perform machining operations on conventional and CNC machine tools such as grinders, milling machines, lathes, and drills. Read and understand blueprints, drawings, sketches, work documents, aircraft technical documents, manuals, bulletins, and directives; produce assigned work in accordance with established standards Other duties as assigned Education/Experience Requirements High School Diploma or equivalent Minimum 4 years of aircraft machining...

General Description Interacts with other engineering groups and customers to define, document, quote, analyze, perform, and interpret test for products, systems, components, or modifications. Develop test strategies and hardware to support production and depot level processes. Duties Reviews customer requirements and specifications and develops compliant testing Develops cost estimates for the test requirements associated with proposals Develops test plans, procedures and programs in support of customer testing Designs and develops test equipment as necessary to support test requirements Relies on extensive experience and judgment to plan and accomplish goals Documents and analyzes test cases and provides feedback and recommendations for product or design changes (DFT) Familiar with open source software and various test development software solutions Ensures testing procedures are in compliance with any required industry specific...

General Description Perform office/administrative functions in the Industrial Maintenance and/or military aviation maintenance communities. Duties Screen phone calls Assist in planning new employee orientation meetings Compile materials and maintain employee database records Prioritize and batch material for data entry Complete information analysis for procedures and reports Assist Program Manager and Supervisor with internal administrative functions Verify employee payroll and data entry Procedure training management requirements Verify security access for employees Other duties as assigned. Education/Experience Requirements High School Diploma or equivalent Minimum of one (1) year of administrative experience Strong computer skills as well as sensitivity to confidential matters Knowledge of aviation technical material Ability to train and supervise others Must be proficient in the use of...