1544 design engineer jobs found

BAE Systems Job Description US CITIZENSHIP REQUIRED #LI-LB1 The Engineering, Science and Analysis (ESA) Strategic Capabilities Unit comprises the technical talent and organizational leadership that enables the successful delivery of high-impact discriminating technologies for our customers' missions. Our collaborative, cross-functional teams are committed to innovation, integrity, continual learning and strong execution. What You'll Do: Apply innovative design techniques to create defense-oriented, cutting-edge electronic systems. Work in a fast-paced team environment on a variety of R&D, proof of concept, and production programs. FPGA development and digital IP integration for tactical RF, high reliability electronic systems. Assignments include designs which will include SOC architectures utilizing soft-core processors, digital filters, image processing algorithms, and communication interfaces/protocols. Design and implement test fixtures including test plans...

Lockheed Martin Description: Design Engineer - Level 2 We are Lockheed Martin You will be the Design Engineer Sr Engineering Design Support, Integrated Fighter Group. IFG Design Support group is part of the Structures Development organization under Engineering & Technology. Our tasks vary from incorporating outstanding ECNs, checking, and verifying engineering drawings, which include Structures, Systems Installation, Harness, Wire Installation, AEI, Supplier SCD, Standards, etc. Our works involve almost everything from nose to tail and from wing tip to wing tip. We check drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning. Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to responsible engineers or designers What You Will Be Doing Experienced Engineering Checker to evaluate and investigate pertinent design factors...

Lockheed Martin Description: Design Engineer - Level 3 We are Lockheed Martin You will be the Design Engineer Sr Engineering Design Support, Integrated Fighter Group. IFG Design Support group is part of the Structures Development organization under Engineering & Technology. Our tasks vary from incorporating outstanding ECNs, checking, and verifying engineering drawings, which include Structures, Systems Installation, Harness, Wire Installation, AEI, Supplier SCD, Standards, etc. Our works involve almost everything from nose to tail and from wing tip to wing tip. We check drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning. Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to responsible engineers or designers. What You Will Be Doing Experienced Engineering Checker to evaluate and investigate pertinent design...

Lockheed Martin Description: Harness Design Engineer - Level 2 We are Lockheed Martin Lockheed Martin Aeronautics in seeking a full-time Harness Design Engineer for the AMMM program in Marietta, Georgia. A successful candidate will apply technical expertise in the development and production of the wiring design for aircraft. Responsibilities for this position may include: - Design and fabrication of wiring diagrams and harnesses for large aircraft platforms - Assist with determining scope, estimate, plan, and implementation of highly complex technical projects - Develop solutions to problems and provide work-around plans to maintain program schedule and budget - Interface with support organizations as well as other management, suppliers, and customers - Proposal development, quoting, implementation, technical check, production/flight-line fault isolation, and continuous improvement identification - Lead technical discussion within program level meetings to achieve program...

Lockheed Martin Description: Harness Design Engineer - Level 3 We are Lockheed Martin Lockheed Martin Aeronautics in seeking a full-time Harness Design Engineer for the AMMM program in Marietta, Georgia. A successful candidate will apply technical expertise in the development and production of the wiring design for aircraft. Responsibilities for this position may include: - Design and fabrication of wiring diagrams and harnesses for large aircraft platforms - Assist with determining scope, estimate, plan, and implementation of highly complex technical projects - Develop solutions to problems and provide work-around plans to maintain program schedule and budget - Interface with support organizations as well as other management, suppliers, and customers - Proposal development, quoting, implementation, technical check, production/flight-line fault isolation, and continuous improvement identification - Lead technical discussion within program level meetings to achieve program...

Honeywell Join the industry leader to design the next generation of breakthroughs The future is what you make it. When you join Honeywell, you become a member of our global team of thinkers, innovators, dreamers and doers who make the things that make the future. That means changing the way we fly, fueling jets in an eco-friendly way, keeping buildings intelligent and safe and even making it possible to breathe on Mars Whether we're turning mustard seeds into fuel, creating quantum algorithms, or making taxis fly, our engineering team is home to the world's leading technological talent. Are you ready to help us make the future? As an Advanced Mechanical Design Engineer for the Voice Research & Development (R&D) Team withinHoneywell's Productivity Solutions and Services (PSS) you will join a team that designs, develops, and integrates hardware that interfaces with highly complex software applications for advanced Voice Automated Solutions. You will design...

Apex Systems Job#: 2044814 Job Description: Senior Design Engineer Experience with vacuum technology to perform engineering and project management activities for design, development, application, manufacture, assembly, test, installation, and servicing of High Voltage Switchgear Division (HVSD) products. Essential Functions Perform engineering activities that support the design, development, and manufacture of new HVSD products and the advancement of existing circuit breaker products. Engineer new designs to meet requirements specified by customer and/or industry specifications. Perform validation of new, modified and prototype designs for functional performance, manufacture, assembly, and service. Direct and perform analyses of operational, test, and research data to establish performance criteria. Develop, prepare, and maintain Bills of Materials (BOMs), design drawings, and breaker Instruction Books (IBs). Direct and supervise the preparation of drawings...

Acushnet Company WE ARE A PRODUCT COMPANY. WE ARE A PROCESS COMPANY. ABOVE ALL, WE ARE A PEOPLE COMPANY. The history of the Acushnet Company is tightly woven into the fabric of golf. From the start, we've been committed to enriching the experience of dedicated golfers through superior product performance, technological innovation, unmatched quality, and exceptional service. We are more than a collection of leading golf brands and products. We are a team united in our passion for the game. We are bridge builders who embrace our responsibility to leave our brands, businesses, communities, and the game of golf in a better position than when we started. Together we live by the credo, "Autograph your work with excellence." We earn our position as unrivaled leaders in every category in which we compete, striving for excellence in all that we do - from the performance and consistency of our products to our engagement with golfers and trade partners, to our commitment to...

Mitsubishi Electric US POSITION SUMMARY: The Engineer must have strong Pro E/Creo design experience involving sheet metal, piping, wiring/cabling using a top-down assembly design method. The Design Engineer is a key cross functional project team member that will provide engineering support to all aspects of design to ensure achievement of project objectives. Designs and develops complex 3D models, large assembly, fabrication drawings utilizing PTC Creo 7.0 from concept development through final release. This individual will interface directly with R&D, Manufacturing and external vendors to resolve design and fabrication issues. Analyzes, researches, and designs components or a system of components to develop new products with ease of manufacturing and high quality in mind. The essential functions of the position include, but are not limited to the following: Creates designs for basic to moderately complex projects by analyzing product specifications, performance...

American Tower Corporation The Team We are seeking an Engineer to join American Tower's U.S. Tower division's Network Engineering & Technology Solutions team. The Engineer leads the design and technical implementation of connectivity solutions of medium complexity for project scopes in malls casinos, hospitality and healthcare venues, education campus environments, multi-dwelling units,multi-tenant units , outdoor networks in private venues, public rights of way, and other such venues. These solutions include, but are not limited to, cellular, carrier grade Wi-Fi, neutral host private LTE networks, IOT connectivity, etc., all of which aim to enable a superior network experience for varied types of customer applications and connected devices. Day to day responsibilities include end-to-end ownership of all engineering related tasks such as implementing core network architecture, original equipment manufacturer recommendations, and network designs and planning for...

nVent We're looking for people who put their innovation to work to advance our success - and their own. Join an organization that ensures a more secure world through connecting and protecting our customers with inventive electrical solutions. WHAT YOU WILL EXPERIENCE IN THIS POSITION: Responsible for research & development and design of new or existing products. Applies engineering techniques to design and/or manufacture products at the lowest overall cost and enhance product value to the customer by either Project, Product or Value Engineering. Provides engineering design and analysis within assigned project scope of work. This may include layouts, specification development, and engineering drawings. Assumes responsibility for cost, schedule, quantity, and budget control for the engineering scope of work. Develops resolution of problems of limited scope following standard procedures. Use advanced software such as NavisWorks, SmartPlant, AutoCAD and our...

Baker Hughes Are you passionate about advancing technology and solving complex problems? Do you want to join a growing engineering team? Join our team at Baker Hughes as a Mechanical Design Engineer, where you will play a crucial role in ensuring our Electrical Submersible Pump (ESP) systems meet the highest standards of design and quality in critical, high-cost applications. About the Role: As an Mechanical Design Engineer, you will work closely with cross-functional teams, including project management, regional technical and sales teams, and directly with customers. This role offers a unique opportunity to engage with all components of the motors, seals, pumps, and motor lead extensions (MLEs). You will be responsible for generating customer-specific designs, supporting manufacturing through assembly and testing, as well as participating in reliability activities. Your attention to detail and organizational skills will drive the successful creation of...

Toyota Material Handling About Toyota Material Handling Big NameBig OpportunitiesLife is Better at Toyota Let Toyota take your career to new heights. Toyota Material Handling provides employees with the opportunity to make a meaningful impact through innovation and creativity in an unmatched culture . Based in Columbus, Indiana, Toyota offers a full line of high-quality material handling equipment and solutions sold under the Toyota brand for over 50 years. We hire great people from a wide array of backgrounds, not just because it is the right thing to do, but because it makes Toyota Material Handling stronger. We seek individuals committed to excellence with talent, skill, and innovation. We offer a generous salary and benefits package with a pleasant and enthusiastic work environment. About the Job: The engineer needed for this position will be responsible for quoting and creating design packages based on specific requests to customize...

B. Braun Medical B. Braun Medical, Inc. Mold Design Engineer - Full-Time/On-Site US-PA-Allentown Job ID: 2024-24876 Type: Regular Full-Time # of Openings: 1 Category: Engineering Allentown Mfg Facility Overview About B. Braun B. Braun Medical Inc., a leader in infusion therapy and pain management, develops, manufactures, and markets innovative medical products and services to the healthcare industry. Other key product areas include nutrition, pharmacy admixture and compounding, ostomy and wound care, and dialysis. The company is committed to eliminating preventable treatment errors and enhancing patient, clinician and environmental safety. B. Braun Medical is headquartered in Bethlehem, Pa., and is part of the B. Braun Group of Companies in the U.S., which includes B. Braun Interventional Systems, Aesculap and CAPS. Globally, the B. Braun Group of Companies employs more than 64,000 employees in 64 countries. Guided by its Sharing Expertise...

AVL Test Systems is searching for a Engineer to join our team in Plymouth, MI.  This is a great opportunity to help grow the facilities area by providing guidance and expertise to both internal employees and AVL customers.     The System Design Engineer provides specification and engineering of facility related sub-systems and integration of AVL equipment for multiple types of testing applications.  The role has strong involvement in complete Tech Center projects.  The position supports all phases of test system related facility planning, from conceptual to definitive design based on global and local building project plans. This support includes calling for tenders, definition of sub-system specifications, submitting and verifying quotations as well as collaborating with both suppliers, design engineering for 2D/3D layouts, and preparation of related calculations. For Tech Centers, this position also requires consultancy for the customer in methodology as well as time...

Wabtec It's not just about your career or job title... It's about who you are and the impact you will make on the world. Because whether it's for each other or our customers, we put People First. When our people come together, we Expand the Possible and continuously look for ways to improve what we create and how we do it. If you are constantly striving to grow, you're in good company. We are revolutionizing the way the world moves for future generations, and we want someone who is ready to move with us. Who will you be working with? Wabtec Components LLC (G & B Specialties) is a division of Westinghouse Air Brake Technologies Corporation (WABTEC), a leading global provider of products and services for the freight rail and passenger transit industries. G & B "specializes" in New Product Design, Engineering, and In-House Manufacturing. G & B's principal products include signal components, switch machine layouts, electric locks, switch circuit controllers,...

At the direction of the Mechanical Engineering Supervisor; this position is responsible for design and development of industrial automation, robotic and electromechanical solutions. These solutions are developed to meet the needs of MEAU’s Business Development and Sales & Marketing objectives. Industries include packaging, material handling, life sciences, semiconductor and consumer electronics. Projects are both MEAU standard product offering and customer custom solutions.   Position Duties and Responsibilities: Ability to create innovative solutions and ability to translate them into final products with SolidWorks parametric modeling software Solutions include End of Arm Tooling (EOAT) for robotic applications, Grippers, Vacuum, Welding, Milling, Sensing, Robotic frames/cells and required mechanical assemblies, Servo driven mechanisms such as linear actuators, positioning systems, Fixtures, jigs, alignment devices, and homing systems, etc. Multitasking skills...

Lockheed Martin Description: Join Our Team as a ASIC & FPGA Design Engineer where you will be working within the central ASIC & FPGA Engineering division for Lockheed Martin Space. Location: King of Prussia PA About Us: At Lockheed Martin, we're on a mission to make a difference in the world. We're looking for you to bring your talents and experience in electronics engineering to join our team and help us continue to innovate and excel in the aerospace industry. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel development and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. What does this role look like? * You will have the opportunity to support over 50 different programs and...

Southern Company Engineer - Mechanical Design Southern Company Services, Technical Shared Services - Mechanical Design Engineering **PLEASE NOTE** This posting serves to fill multiple Engineer positions in our Mechanical Design Engineering group. WORK LOCATION, SCHEDULE, & TRAVEL This position will be based out of The Energy Center in Birmingham, AL. Hybrid work schedule (both in-office and telecommute); currently three (3) days in-office and two (2) days telecommute (subject to adjustment). This position will require a mix of both field and office work. Field work can include site visits to various generating facilities and may require overnight travel. This position will require some travel (day and overnight, up to 25%) and the ability to work successfully in a remote/virtual environment with access to internet service. Relocation assistance may be provided if the successful candidate does not currently live within a reasonable commute...

SharkNinja Our purpose is to positively impact people's lives every day in every home around the world! We work very hard to provide our consumers with high-quality, exciting 5-star products that make life easier. We thrive on passion and innovation and are looking for great people, with great ideas, who want to build the next big thing and develop while they do. Product Design Engineering Co-Op Work Period: Mid May Through Mid August Location: Onsite 5 Days a Week Needham, MA. This position has no relocation or housing assistance. Summary of Position: SharkNinja is seeking ambitious, creative, and highly skilled Industrial Design & Mechanical Engineering Co-Ops to sit at the intersection of these roles as a Product Design Engineer with our advanced development teams. Candidates will work at the leading edge of product ideation, helping develop the next generation of user-centered, innovative products for our Shark and Ninja brands. This role...