49 jobs found

An "entry level" technician: Capable of oil changes, tire rotations, completing minor services, tire, and battery replacement etc. Can perform most tasks that do not require in-depth diagnostics or complex critical mechanical aptitude with guidance as needed upon researching work instructions, or after being taught the proper techniques first.

A bumper to bumper, master certified technician capable of diagnosing and repairing any system of the automobile without supervision. In most cases, are leaders in the shop and chosen to support the development of other technicians when needed. At times, may be called upon to interface with customers in various capacities.

Technician must be able to diagnose and repair automotive systems including engine, transmission, electrical, steering suspension, braking, heating & cooling, etc. to dealership and manufacturer's standards with minimal supervision.

Technician must be able to diagnose and repair automotive systems including engine, transmission, electrical, steering suspension, braking, heating & cooling, etc. to dealership and manufacturer's standards with minimal supervision.

A "bumper to bumper", "master technician" capable of diagnosing and repairing any system of the automobile to dealership and manufacturer's standards without supervision.

Technician must be capable of changing oil, tires, replace batteries, and perform minor service work as assigned in accordance with dealer and factory standards. Potential to be further trained leading to a rewarding career as a Certified Technician.

A technician that can perform common light duty service procedures such as oil changes, exhaust work, tire services, etc. with minimum supervision.

A "bumper to bumper", "master technician" capable of diagnosing and repairing any system of the automobile to dealership and manufacturer's standards without supervision.

A "bumper to bumper", "master technician" capable of diagnosing and repairing any system of the automobile to dealership and manufacturer's standards without supervision.

A technician that can perform common light duty service procedures such as oil changes, exhaust work, tire services, etc. with minimum supervision.

As a service consultant you will be responsible for initiating automotive services and repairs by ascertaining vehicle performance problems and service requests; verifying warranty and service contract coverage; developing estimates; writing repair orders; maintaining customer records. You will serve as the communicator and liaison between the customer and technician; ensuring the customer's needs are understood by the technician and the needed and recommended service/repairs are understood by the customer.

We are looking for an experienced Flexographic Press Operator. The operator will possess a combination of knowledge, skill, and abilities to carry out work activities related to the operation of the flexographic printing press. Responsibilities Set up, adjust, maintain, and operate a 7.0”-10” flexographic press Installs Anilox rollers, plates. inks and dies into proper stations, making necessary adjustments to maintain quality of production. Notifies Supervision of needed repairs and replacement parts. Understands all the documents related to the printing process and adheres to specification requirements Troubleshoot press for any malfunctions or irregularities Perform maintenance tasks and regular quality checks Responsible for organization of stock in warehouse Qualifications: Minimum 3 years FLEXO printing experience Ability to fix machine parts as needed to ensure proper operation Extremely detail oriented   Strong quality control and...

CLICK ON LINK BELOW TO BE DIRECTED TO OUR WEBSITE FOR YOUR APPLICATION PROCESS: https://blackrockres.com/jobs/automation-engineer/ Automation Engineer Direct Hire Pittsburgh, PA Salary is pending experience Steel Experience is the key BlackRock Resources is looking for an Automation Engineer with a BS or MS in Electrical Engineering with good PLC programming skills. The person we are looking for will have a background with Steel manufacturing. Qualifications Required BS or MS in Electrical Engineer 5 plus years of experience PLC Programming Steel Manufacturing Control Systems Responsibilities Develop and execute engineering solutions for modernization and new installations of Level 1 control systems for Process Line equipment Design and implementation of Level 1 control systems based on project requirements Interfaces and communicates with individuals and units within or outside of the...

If you are qualified and interested please send your resume to Kristie at [email protected]   IMMEDIATE NEED Survey Crew Chief  and Survey Crew  Member openings available Direct Hire Salary is Dependent on Experience and position Pittsburgh, PA BlackRock Resources has a client in Pittsburgh that is looking for a Survey Crew Chief and Crew Member for direct hire positions. The right person will have 2 plus years' experience and autocad experience. Qualifications 2 plus years of land surveying experience. Knowledge of Topcon or Trimble GPS and total stations a must. Construction Stakeout, As built Surveys, Utility line Route Surveys, Topographic Surveys, Property and Boundary Surveys experience is required. Knowledge of Carlson or AutoCAD Civil 3D programs is required. Responsibilities To lead the survey crew in the field by providing topographic, boundary and construction surveys on various civil engineering...

If you are interested and qualified please send your resume to [email protected] Principle Design Engineer (Electrical) Pittsburgh, PA Direct Hire Pay is pending Experience BlackRock Resources has a client in the Pittsburgh area that has a new opening for a Principle Design Engineer. The right candidate will have a BS in Electrical Engineering or Electrical Engineering Technology. They will provide technical consultation and leadership in addition to performing engineering and project management activities in the areas of product design, development, troubleshooting, application, manufacturing, monitoring and service. Must have Qualifications: Bachelor’s Degree in Electrical Engineering with a minimum 10 years of experience in a design engineering capacity, or equivalent education and experience. Ability to troubleshooting electrical systems, providing solutions and root cause reports. Experience out of...

CLICK ON LINK BELOW TO BE DIRECTED TO OUR WEBSITE FOR YOUR APPLICATION PROCESS: https://blackrockres.com/jobs/project-manager/ We are currently hiring a Project Manager for our client in the Pittsburgh, PA area.  Job duties / requirements are listed below. Job Duties: Oversee the engineering and construction of a project from conception through turn over. Collaborate with owners, engineers, architects & vendors to determine the design parameters of a project. Responsible for the pre-construction services on a project to ensure that constructability, budget, and schedule issues are addressed. Propose means and methods of constructability and suggest cost savings solutions. Procure and source materials, equipment vendors and subcontractors. Client interaction and the management of their expectations. Create and maintain project schedules, progress reports, financial projections, meeting minutes, etc. Have an awareness to identify...

If you are qualified and interested in this position please send your resume to Kristie at [email protected]   Manufacturing Manager Direct Hire Bedford, PA Area Pay up to 120k Blackrock Resources is looking for a Manufacturing Manager for a client in the Bedford, PA area. The right candidate with have 10 years of prior manufacturing experience with a BS Degree. This position reports directly to the Site Business Director. This position partners closely with Engineering, Global Logistics/Supply Planning, Quality, Finance and  Customer Service for optimized customer satisfaction and manufacturing performance. Must have Requirements: BS in Engineering, business or a related field 10 years of experience in manufacturing, and 5 years of related management experience. Strong organizational, interpersonal and hands-on problem-solving skills, and experience working effectively with cross-functional teams. Experienced with Lean/Six...

CLICK ON LINK BELOW TO BE DIRECTED TO OUR WEBSITE FOR YOUR APPLICATION PROCESS: https://blackrockres.com/jobs/estimator/ We are currently hiring an Estimator in the Pittsburgh, PA area.  Job duties / requirements are listed below. Duties: Estimate job costs using bid specs, detail drawings, historical data, and other information to prepare accurate job cost analysis Determine work scope, tools, and equipment requirements Prepare and send quote documents to customer Enter quote data into business system for tracking purposes Enter router information into business system Create sales/work orders Develops production schedule to determine time frame, procedures for accomplishing project, and allotment of available resources to various phases of the job Monitor performance and evaluate for opportunities to improve processes Track job performance and monitor for deviations from quoted times and costs Requirements Proficient in...

If you are qualified and interested please send your resume to Kristie at [email protected] Sales and Proposal Engineer Direct Hire Electrical Engineering Background Pay up to 90K Pittsburgh Area BlackRock Resources has a client in the Pittsburgh, PA area that is looking for a Sales Engineer with a BS in Electrical Engineering. The right person will have at least 3 plus years of experience.  This person will travel when needed to meet with the client or see the facility. Required Skills Minimum of a Bachelor's Degree in Electrical Engineering. 3+ years of combined experience within automation and/or sales roles in metals or similar industries. Willing to travel to support the sales activities. Responsibilities Develop technical solutions for sales projects based on project requirements. Develop project cost estimates based on the technical solution utilizing the required vendors and...

CLICK ON LINK BELOW TO BE DIRECTED TO OUR WEBSITE FOR YOUR APPLICATION PROCESS: https://blackrockres.com/jobs/mid-level-piping-designer/ Blackrock Resources has an immediate need for Mid and Sr Level Piping Designers for our Industrial Engineering client located just north of downtown Pittsburgh.  Local candidates only please. These will be contract to hire roles and Blackrock Resources will provide holidays, PTO and partially paid health benefits while on a six month contractual period. Qualifications: • Minimum 10 years of piping design experience • AutoCAD 2D proficient, 3D beneficial • Ability to read and understand P & ID’s • Experienced with U/G piping • Process and utility piping experience in an industrial environment • Experienced in piping design for steel mill piping including melt shops and continuous casters • Familiar with FRP piping design and supporting • Familiar with isometric drawings and bills of material • Able to conduct field...